Fujitsu PRIMERGY S40-DF Manual de usuario

Server

PRIMERGY S40-DF

Capacity Extension

Xenia Fierley

Siemens Nixdorf Informationssysteme AG ICP CS PS QM 3

81730 München

e-mail: email: [email protected]

Tel.: (089) 636-47896

Fax: 0 700 / 372 00000

U41100-J-Z156-1-74

Sprachen: En

Edition May 2001

This manual is printed on

paper treated with

chlorine-free bleach.

Comments…Suggestions…Corrections…

The User Documentation Department would like to know

your opinion on this manual. Your feedback helps us to

optimize our documentation to suit your individual needs.

Fax forms for sending us your comments are included at

the back of the manual.

There you will also find the addresses of the relevant User

Documentation Department

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

This manual was produced by

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Ger an

English

U41100-J-Z156-1-74

Contents

1 PRIMERGY S40-DF capacity extension . . . . . . . . . . . . . 1

1.1 Target group . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

1.2 Notational conventions . . . . . . . . . . . . . . . . . . . . . . . 2

1.3 Important notes . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.3.1 Notes on safety . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.3.2 ESD label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.3.3 Notes on transportation . . . . . . . . . . . . . . . . . . . . . . 4

1.4 Converting the PRIMERGY S40-DF . . . . . . . . . . . . . . . 5

1.4.1 Removing and mounting the door . . . . . . . . . . . . . . . . . 8

1.4.2 Removing and mounting the side or top cover . . . . . . . . . . 9

1.4.3 Removing and mounting the protective shield . . . . . . . . . . 10

1.4.4 Converting the internal configuration . . . . . . . . . . . . . . 11

1.4.5 Installing the LVD extender board . . . . . . . . . . . . . . . . 17

1.4.6 Connecting the capacity extension . . . . . . . . . . . . . . . 19

Related publications . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

U41100-J-Z156-1-74 1

1 PRIMERGY S40-DF capacity

extension

The PRIMERGY S40-DF is the active component in the PRIMERGY S40 family

of storage subsystems. The integrated disk array controller allows you to extend

storage capacity using additional externally-connected passive PRIMERGY

S40-ES storage devices. Two of these so-called “daisy-chain” configurations,

i.e., with one or three PRIMERGY S40-ES units, are supported (see also the

chapter on “Configurations” in the PRIMERGY S40-DF Operating Manual).

In order to use a configuration with three external PRIMERGY S40-ES units,

you will need the 1-channel version of the PRIMERGY S40-DF.

This manual contains conversion instructions which describe the steps required

to prepare a PRIMERGY S40-DF (3-channel version) for capacity expansion

with three PRIMERGY S40-ES subsystems.

For more assistance in understanding the details here, see also the operating

instructions for the “PRIMERGY S40-DF Storage Subsystem”. Further relevant

information can be found in the manual “Safety, Warranty and Ergonomy“ (see

section “Related publications” on page 21).

2 U41100-J-Z156-1-74

Target group PRIMERGY S40-DF capacity extension

1.1 Target group

These conversion instructions are intended for those who are responsible for

installing hardware and for ensuring that the system runs smoothly (service

personnel, technicians and technical specialists).

You will therefore need to be familiar with the hardware and data transmission

concepts to understand the various activities described.

1.2 Notational conventions

bold type Used for emphasis in the body of the text

“quotation marks” Used for references to other chapters, sections or

manuals

ÊIdentifies an action that you need to take

VCAUTION! Indicates a warning which, if not observed, could

jeopardize your health or the proper functionality of

the system

IIndicates additional information, notes and tips

Table 1: Notational conventions

U41100-J-Z156-1-74 3

PRIMERGY S40-DF capacity extension Important notes

1.3 Important notes

1.3.1 Notes on safety

Please observe all the safety instructions given in the documentation of the

PRIMERGY S40-DF as well as the following notes:

VCAUTION!

●The actions described here should only be performed by technicians,

service personnel or technical specialists. Any failure to observe the

guidelines in this manual could expose the user to considerable risks

(electric shock, fire hazards) and could also damage the equipment.

Note that any unauthorized opening of the device will result in the

invalidation of the warranty and exclusion from all liability.

●Make sure that no objects (such as bracelets or paper clips) or liquids

fall into the device, as this may result in an electric shock or a short

circuit.

●Before opening the unit, switch off the device and then pull out the

power plugs.

●Note that switching off the device does not disconnect it from the

power supply. To ensure that the device is fully disconnected from the

power supply, you must pull out the power plugs.

1.3.2 ESD label

Systems and components which might be damaged by electrostatic discharge

(ESD) may be marked with the following label:

Figure 1: Label indicating ESD-sensitive devices

4 U41100-J-Z156-1-74

Important notes PRIMERGY S40-DF capacity extension

When handling ESD-sensitive devices, it is essential that you observe the

following guidelines:

ÊYou must electrostatically discharge yourself (e.g. by touching a grounded

object) before handling such components.

ÊAny devices or tools that are used must be free from electrostatic charge.

ÊPull out the power plug before mounting or dismounting ESD-sensitive

devices.

ÊESD-sensitive devices should only be held at the edges.

ÊDo not touch any pins, connectors or circuits on an ESD-sensitive device.

ÊWhen installing boards, make sure that you use an electrostatic wrist-band

or some other suitable grounding cable that connects you to the external

housing of the system unit.

ÊPlace all components on a pad which is free from electrostatic charge.

IFor detailed instructions on handling ESD-sensitive modules, please

read the German documentation “Richtlinie zur Handhabung von

elektrostatisch gefährdeten Bauelementen und Baugruppen (EGB)" or

“ITS-Rundschreiben Nr. 4/95".

IAn ESD kit can be ordered from SIEMENS sales or an authorized

distributor under the order number 8501 and stock-no. 06431046.

1.3.3 Notes on transportation

IThe storage subsystem should always be transported only in its original

packaging or in some other suitable packaging that protects it against

shock or impact.

It should only be unpacked at the deployment site.

If you need to physically lift or transport the storage subsystem, ask

someone to assist you.

Tabla de contenidos

Otros manuales de Almacenamiento de Fujitsu

Fujitsu

Fujitsu ETERNUS DX S4 Series Manual de usuario

Fujitsu

Fujitsu MPC3032AT Manual de usuario

Fujitsu

Fujitsu MAN3184MC - Enterprise 18.4 GB Hard Drive Manual de usuario

Fujitsu

Fujitsu MHT2080BH Manual de usuario

Fujitsu

Fujitsu ETERNUS LT20 S2 Cómo utilizar

Fujitsu

Fujitsu MHV2080BS Manual de usuario

Fujitsu

Fujitsu MPE3XXXAT Manual de usuario

Fujitsu

Fujitsu MAP3147 s Manual de usuario

Fujitsu

Fujitsu ETERNUS DX Disk Manual de usuario

Fujitsu

Fujitsu Eternus DX500 S3 Guía de instalación

Fujitsu

Fujitsu MAX3147NP Manual de usuario

Fujitsu

Fujitsu ETERNUS DX60 S3 Manual de usuario

Fujitsu

Fujitsu Eternus DX80 S2 Manual de instrucciones

Fujitsu

Fujitsu MAT3300NC Manual de usuario

Fujitsu

Fujitsu Eternus DX80 S2 Manual de usuario

Fujitsu

Fujitsu ETERNUS DX80 Manual de usuario

Fujitsu

Fujitsu MAF3364LC - Enterprise 36.4 GB Hard Drive Manual de usuario

Fujitsu

Fujitsu ETERNUS DX100 S3 Manual de usuario

Fujitsu

Fujitsu ETERNUS AF250 S2 Instrucciones de montaje

Fujitsu

Fujitsu eternus af Manual de usuario

Fujitsu

Fujitsu Eternus DX80 S2 Manual de usuario

Fujitsu

Fujitsu MAS3367FC Manual de usuario

Fujitsu

Fujitsu ETERNUS DX60 S3 Manual de usuario

Fujitsu

Fujitsu PRIMERGY PG-DTA101 Manual de usuario

Manuales populares de Almacenamiento de otras marcas

QNAP

QNAP TS 32PXU Series Manual de usuario

LaCie

LaCie RUGGED RAID Manual de usuario

Freecom

Freecom CLS DOCK Manual de usuario

PNY

PNY Attache P-FD64MBATT3 Manual de usuario

HP StorageWorks MSL2024 Manual de usuario

OLT

OLT 6x6 Maximizer Manual de usuario

Transcend

Transcend JetFlash 160 Manual de usuario

LaCie

LaCie RUGGED MINI Manual de usuario

Thunderbolt

Thunderbolt 600 Manual de usuario

Panasonic

Panasonic LB-DH8 series Manual

Intel

Intel RAID High Availability Manual de usuario

LaCie

LaCie 12big Thunderbolt 3 Manual de usuario

Spectra Logic

Spectra Logic T-Series Spectra T50e Manual de usuario

Panasonic

Panasonic LKM-F931-1 Manual de usuario

Tabernus

Tabernus Enterprise Erase E2400 Manual de usuario

Rocstor

Rocstor COMMANDER 3F series Manual de usuario

HP P9000 Manual de usuario

Western Digital

Western Digital Ultrastar Data60 Manual de usuario