Fujitsu MAB3045 Manual de usuario

C141-E035-03EN

MAA3182 SERIES

MAB3091, MAB3045 SERIES

MAC3091, MAC3045 SERIES

DISK DRIVES

PRODUCT MANUAL

C141-E035-03EN i

REVISION RECORD

Edition Date published Revised contents

01 Mar., 1997

02 Nov., 1997 Pages 1-2, 1-5 to 1-11, 2-2 to 2-5, 2-7, 3-2 to 3-4, 3-7 to 3-10, Chapter 4, 5-2, 5-3, 5-5 to

5-10, 5-12 to 5-24, Chapter 6, Appendix A, C-1, C-2, D-2, Appendix E revised.

03 Jan., 1998 Pages 1-3, 1-4, 1-7 to 1-9, Chapter 2, 3-2 to 3-4, 3-6, 3-10, 4-4, 4-5, 4-7, 4-8, 4-10, 4-11,

4-14, 4-22, 4-23, 4-27, 6-2, 6-3, D-2 revised.

Specification No.: C141-E035-**EN

The contents of this manual is subject to

change without prior notice.

C141-E035-03EN iii

FOR SAFE OPERATION

Handling of This manual

This manual contains important information for using this product. Read thoroughly before

using the product. Use this product only after thoroughly reading and understanding

especially the section “Important Alert Items” in this manual. Keep this manual handy, and

keep it carefully.

FUJITSU makes every effort to prevent users and bystanders from being injured or from

suffering damange to their property. Use the product according to this manual.

Functional Limitations

There may be certain functional limitations concerning the specifications and functions of the

products covered by this manual depending on the equipment version, especially concerning

the following functions.

Versions in which there functions can be used will be communicated through

“ENGINEERING CHANGE REQUEST/NOTICE”, issued by Fujitsu.

Function Equipment Version Which Supports These Functions

Equipment

Version No. EPROM

Version

No.

Standard INQUIRY Data Product

Revision (ASCII)

READ RAM Command

WRITE RAM Command These commands cannot be used in the current version.

(Proceed to the Copyright Page)

iv C141-E035-03EN

Related Standards

Specifications and functions of products covered by this manual comply with the following

standards.

Standard (Text) No. Name Enacting Organization

ANSI X3.131-1986 American National Standard for

Information Systems—Small Computer

System Interface (SCSI)

American National

Standards Institute

(ANSI)

ANSI X3.131-1994 American National Standard for

Information Systems—Small Computer

System Interface - 2(SCSI-2)

American National

Standards Institute

(ANSI)

X3T9.2/85-52 Rev 4.B COMMON COMMAND SET (CCS)

of the Small Computer

System Interface (SCSI)

American National

Standards Institute

(ANSI)

X3T9.2 855D Rev 12 WORKING DRAFT Information

Technology SCSI-3 Parallel Interface American National

Standards Institute

(ANSI)

X3T10/10T1D Rev 6 Dfaft proposed

American National Standard for

Information Systems—SCSI-3

Fast-20 Parallel Interface

(Fast 20-SCSI)

American National

Standards Institute

(ANSI)

C141-E035-03EN v

PREFACE

This manual describes the MAA3182xx (hereafter, MAA31xxxx), MAB3091xx, MAB3045xx

(hereafter, MAB30xxxx), MAC3091xx, MAC3045xx (hereafter, MAC30xxxx) series 3.5-inch fixed

disk drives with an embedded SCSI controller.

This manual details the specifications and functions of the above disk drive, and gives the requirements

and procedures for installing it into a host computer system.

This manual is written for users who have a basic understanding of fixed disk drives and their use in

computer systems. The MANUAL ORGANIZATION section describes organization and scope of this

manual. The need arises, use the other manuals.

Chapter 1 GENERAL DESCRIPTION

This chapter introduces the MAA31xxxx, MAB30xxxx and MAC30xxxx series disk drives and

discusses their standard features, hardware, and system configuration.

Chapter 2 SPECIFICATIONS

This chapter gives detailed specifications of the MAA31xxxx, MAB30xxxx and MAC30xxxx series

disk drives and their installation environment.

Chapter 3 DATA FORMAT

This chapter describes the data structure of the disk, the address method, and what to do about media

defects.

Chapter 4 INSTALLATION REQUIREMENTS

This chapter describes the basic physical and electrical requirements for installing MAA31xxxx,

MAB30xxxx and MAC30xxxx series disk drives.

Chapter 5 INSTALLATION

This chapter explains how to install MAA31xxxx, MAB30xxxx and MAC30xxxx series disk drives. It

includes the notice and procedures for setting device number and operation modes, mounting the disk

drive, connecting the cables, and confirming drive operation.

Chapter 6 DIAGNOSIS and MAINTENANCE

This chapter describes the automatic diagnosis, and maintenance of the MAA31xxxx, MAB30xxxx

and MAC30xxxx series disk drive.

APPENDIX A to E

The appendixes give supplementary information, including the locations of mounting setting terminals

and connectors, a list of setting items, the signal assignments of interface connectors, lists of model

names and product numbers, and SCSI interface functions.

The model numbers have a suffix that describes the electrical requirements of the SCSI interface

between host system and disk drive, the data formatted at the factory and device type.

vi C141-E035-03EN

CONVENTIONS

This manual uses the following conventions for alerts to prevent physical or property damages to users

or by standards.

DANGER

DANGER indicates that personal injury will occur if the user does not perform the procedure

correctly.

WARNING

WARNING indicates that personal injury could occur if the user does not perform the procedure

correctly.

CAUTION

CAUTION indicates that either minor or moderate personal injury may occur if the user does not

perform the procedure correctly.

NOTICE

NOTICE indicates that inconvenience to the user such as damages to the product, equipment, data,

and/or other property may occur if the user does not pay attention or perform the procedure correctly.

IMPORTANT

IMPORTANT indicates information that the helps the user use the product more effectively.

Indicates

This manual indicates;

Decimal number: Indicates as it is.

Hexadecimal number: Indicates as X’17B9’, 17B9h, or 17B9H

Binary number: Indicates as “010”

C141-E035-03EN vii

DISCLAIMER

Failure of the MAA31xxxx, MAB30xxxx and MAC30xxxx series intelligent disk drive is defined as a

failure requiring adjustments, repairs, or replacement. Fujitsu is not responsible for drive failures

caused by misuse by the user, poor environmental conditions, power trouble, host problems, cable

failures, or any failure not caused by the drive itself.

The suffix of the model name of the disk drive varies depending on the electrical requirements,

capacity, and data format at factory shipment of the SCSI, i.e., the interface for connecting the three

device types or host system and the disk drives (Note 1). However, in this manual, the typical model

names (Note 2) are used unless otherwise noted. These disk drives may be called intelligent disk

drives (IDD), drives, or devices in this manual.

Note 1: Model names

M AA 3 182 SC

Interface types SP: Single-Ended, 16-bit SCSI

SC: Single-Ended, 16-bit SCSI SCA2 connector

Formatted capacity (100 MB units)

Disk size 3: 3.5 inch

Type AA: 1.6-inch height (7,200rpm)

AB: 1-inch height (7,200rpm)

AC: 1-inch height (10,033rpm)

Note 2: Type model name

Type model

name Model name

MAA3182 MAA3182SP, MAA3182SC

MAB3091 MAB3091SP, MAB3091SC

MAB3045 MAB3045SP, MAB3045SC

MAC3091 MAC3091SP, MAC3091SC

MAC3045 MAC3045SP, MAC3045SC

viii C141-E035-03EN

MANUAL ORGANIZATION

PRODUCT

MANUAL

(This manual)

1. General Description

2. Specifications

3. Data Format

4. Installation Requirements

5. Installation

6. Diagnostics and Maintenance

SCSI Physical

Interface

Specifications

1. SCSI Bus

2. SCSI Message

3. SCSI Bus Error Recovery Processing

SCSI Logical

Interface

Specifications

1. Command Processing

2. Data Buffer Management

3. Command Specification

4. Sense Data and error Recovery Procedure

5. Disk Medium Management

Maintenance

Manual 1. Specifications and Equipment Configuration

2. Maintenance and Diagnostic

3. Error Analysis

4. Removal and Replacement Procedures

5. Principle of Operation

C141-E035-03EN ix

CONTENTS

page

CHAPTER 1 GENERAL DESCRIPTION..........................................................................1-1

1.1 Standard Features ...........................................................................................................1-2

1.2 Hardware Structure.........................................................................................................1-5

1.3 System Configuration.....................................................................................................1-10

CHAPTER 2 SPECIFICATIONS.........................................................................................2-1

2.1 Hardware Specifications................................................................................................. 2-1

2.1.1 Model name and part number......................................................................................... 2-1

2.1.2 Function specifications................................................................................................... 2-2

2.1.3 Environmental specifications.......................................................................................... 2-4

2.1.4 Error rate.........................................................................................................................2-5

2.1.5 Reliability....................................................................................................................... 2-5

2.2 SCSI Function Specifications......................................................................................... 2-7

CHAPTER 3 DATA FORMAT ............................................................................................3-1

3.1 Data Space...................................................................................................................... 3-1

3.1.1 Cylinder configuration....................................................................................................3-1

3.1.2 Alternate spare area ........................................................................................................3-5

3.1.3 Track format...................................................................................................................3-6

3.1.4 Sector format.................................................................................................................. 3-8

3.1.5 Format capacity.............................................................................................................. 3-10

3.2 Logical Data Block Addressing...................................................................................... 3-11

3.3 Defect Management........................................................................................................3-12

3.3.1 Defect list ....................................................................................................................... 3-12

3.3.2 Alternate block allocation............................................................................................... 3-12

CHAPTER 4 INSTALLATION REQUIREMENTS ..........................................................4-1

4.1 Mounting Requirements................................................................................................. 4-1

4.1.1 External dimensions .......................................................................................................4-1

4.1.2 Mounting........................................................................................................................ 4-6

4.1.3 Notes on mounting......................................................................................................... 4-6

4.2 Power Supply Requirements ..........................................................................................4-11

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Almacenamiento de Fujitsu

Fujitsu

Fujitsu MHC2032AT Manual de usuario

Fujitsu

Fujitsu MPG3409AT Manual de usuario

Fujitsu

Fujitsu ETERNUS DX Disk Manual de usuario

Fujitsu

Fujitsu ETERNUS AX Series Manual de usuario

Fujitsu

Fujitsu MPE3XXXAT Manual de usuario

Fujitsu

Fujitsu MHM2100AT - Mobile 10 GB Hard Drive Manual de usuario

Fujitsu

Fujitsu ETERNUS DX60 S3 Manual técnico

Fujitsu

Fujitsu MPF3XXXAT Manual de usuario

Fujitsu

Fujitsu MPG3xxxAT Manual de usuario

Fujitsu

Fujitsu ETERNUS DX60 Manual de usuario

Fujitsu

Fujitsu GP5-HD9G4 Manual de usuario

Fujitsu

Fujitsu RE25U300J Manual de usuario

Fujitsu

Fujitsu MPD3XXXAH Manual de usuario

Fujitsu

Fujitsu ETERNUS DX S4 Series Manual de usuario

Fujitsu

Fujitsu Eternus DX80 S2 Manual de usuario

Fujitsu

Fujitsu ETERNUS DX60 S4 Manual de usuario

Fujitsu

Fujitsu PRIMERGY LTO3 Manual de usuario

Fujitsu

Fujitsu ETERNUS AF250 S2 Instrucciones de montaje

Fujitsu

Fujitsu MAX3073NC SCSI,80, DC961,Hard Manual de usuario

Fujitsu

Fujitsu ETERNUS AF Series Manual de usuario

Fujitsu

Fujitsu ETERNUS DX60 S3 Manual de usuario

Fujitsu

Fujitsu MHX2300BT - Mobile 300 GB Hard Drive Manual de usuario

Fujitsu

Fujitsu GRANPOWER500 TEAMSERVER Series Manual de usuario

Fujitsu

Fujitsu MHA2021AT Manual de usuario

Manuales populares de Almacenamiento de otras marcas

QNAP

QNAP TS 32PXU Series Manual de usuario

LaCie

LaCie RUGGED RAID Manual de usuario

Freecom

Freecom CLS DOCK Manual de usuario

PNY

PNY Attache P-FD64MBATT3 Manual de usuario

HP StorageWorks MSL2024 Manual de usuario

OLT

OLT 6x6 Maximizer Manual de usuario

Transcend

Transcend JetFlash 160 Manual de usuario

LaCie

LaCie RUGGED MINI Manual de usuario

Thunderbolt

Thunderbolt 600 Manual de usuario

Panasonic

Panasonic LB-DH8 series Manual

Intel

Intel RAID High Availability Manual de usuario

LaCie

LaCie 12big Thunderbolt 3 Manual de usuario

Spectra Logic

Spectra Logic T-Series Spectra T50e Manual de usuario

Panasonic

Panasonic LKM-F931-1 Manual de usuario

Tabernus

Tabernus Enterprise Erase E2400 Manual de usuario

Rocstor

Rocstor COMMANDER 3F series Manual de usuario

HP P9000 Manual de usuario

Western Digital

Western Digital Ultrastar Data60 Manual de usuario