Fujitsu PRIMERGY TX1320 M3 Manual de usuario
Copyright and Trademarks
Comments…Suggestions…Corrections…
The User Documentation Department would like to
know your opinion of this manual. Your feedback helps
us optimize our documentation to suit your individual
needs.
Feel free to send us your comments by e-mail to
Certified documentation
according to DIN EN ISO 9001:2008
To ensure a consistently high quality standard and
user-friendliness, this documentation was created to
meet the regulations of a quality management system
which complies with the requirements of the standard
DIN EN ISO 9001:2008.
cognitas. Gesellschaft für Technik-Dokumentation mbH
www.cognitas.de
Copyright 2017 FUJITSU LIMITED
All rights reserved.
Delivery subject to availability; right of technical modifications reserved.
All hardware and software names used are trademarks of their respective manufacturers.
– The contents of this manual may be revised without prior notice.
– Fujitsu assumes no liability for damages to third party copyrights or other rights arising from
the use of any information in this manual.
– No part of this manual may be reproduced in any form without the prior written permission
of Fujitsu.
Microsoft, Windows, Windows Server, and Hyper V are trademarks or registered trademarks of
Microsoft Corporation in the USA and other countries.
Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries
in the USA and other countries.
TX1320 M3 Operating Manual 3
Before reading this manual
For your safety
This manual contains important information for safely and correctly using this
product.
Carefully read the manual before using this product. Pay particular attention to
the accompanying manual "Safety Notes and Regulations" and ensure these
safety notes are understood before using the product. Keep this manual and the
manual "Safety Notes and Regulations" in a safe place for easy reference while
using this product.
Radio interference
This product is a "Class A" ITE (Information Technology Equipment). In a
domestic environment this product may cause radio interference, in which case
the user may be required to take appropriate measures. VCCI-A
Aluminum electrolytic capacitors
The aluminum electrolytic capacitors used in the product's printed circuit board
assemblies and in the mouse and keyboard are limited-life components. Use of
these components beyond their operating life may result in electrolyte leakage
or depletion, potentially causing emission of foul odor or smoke.
As a guideline, in a normal office environment (25°C) operating life is not
expected to be reached within the maintenance support period (5 years).
However, operating life may be reached more quickly if, for example, the
product is used in a hot environment. The customer shall bear the cost of
replacing replaceable components which have exceeded their operating life.
Note that these are only guidelines, and do not constitute a guarantee of
trouble-free operation during the maintenance support period.
High safety use
This product has been designed and manufactured to be used in commercial
and/or industrial areas as a server.
When used as visual display workplace, it must not be placed in the direct field
of view to avoid incommoding reflections (applies only to TX server systems).
The device has not been designed or manufactured for uses which demand an
extremely high level of safety and carry a direct and serious risk of life or body
if such safety cannot be assured.
4 Operating Manual TX1320 M3
These uses include control of nuclear reactions in nuclear power plants,
automatic airplane flight control, air traffic control, traffic control in mass
transport systems, medical devices for life support, and missile guidance
control in weapons systems (hereafter, "high safety use"). Customers should
not use this product for high safety use unless measures are in place for
ensuring the level of safety demanded of such use. Please consult the sales
staff of Fujitsu if intending to use this product for high safety use.
Measures against momentary voltage drop
This product may be affected by a momentary voltage drop in the power supply
caused by lightning. To prevent a momentary voltage drop, use of an AC
uninterruptible power supply is recommended.
(This notice follows the guidelines of Voltage Dip Immunity of Personal
Computer issued by JEITA, the Japan Electronics and Information Technology
Industries Association.)
Technology controlled by the Foreign Exchange and Foreign Trade
Control Law of Japan
Documents produced by Fujitsu may contain technology controlled by the
Foreign Exchange and Foreign Trade Control Law of Japan. Documents which
contain such technology should not be exported from Japan or transferred to
non-residents of Japan without first obtaining authorization in accordance with
the above law.
Harmonic Current Standards
This product conforms to harmonic current standard JIS C 61000-3-2.
Only for Japan: About SATA hard disk drives (HDDs)
The SATA version of this server supports HDDs with SATA / BC-SATA storage
interfaces. Please note that the usage and operation conditions differ
depending on the type of HDD used.
Please refer to the following internet address for further information on the
usage and operation conditions of each available type of HDD:
http://jp.fujitsu.com/platform/server/primergy/harddisk/
Only for Japan:
Shielded LAN cables should be used in this product.
TX1320 M3 Operating Manual
Contents
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
1.1 Concept and target groups for this manual . . . . . . . . . . 9
1.2 Documentation overview . . . . . . . . . . . . . . . . . . . 10
1.3 Notational conventions . . . . . . . . . . . . . . . . . . . . 11
2 Functional overview . . . . . . . . . . . . . . . . . . . . . . 13
2.1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2.2 Server specification . . . . . . . . . . . . . . . . . . . . . . 23
3 Installation steps, overview . . . . . . . . . . . . . . . . . . 31
4 Important information . . . . . . . . . . . . . . . . . . . . . 33
4.1 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . 33
4.2 ENERGY STAR . . . . . . . . . . . . . . . . . . . . . . . . . 42
4.3 CE conformity . . . . . . . . . . . . . . . . . . . . . . . . . 42
4.4 FCC Class A Compliance Statement . . . . . . . . . . . . . 43
4.5 Environmental protection . . . . . . . . . . . . . . . . . . . 44
5 Hardware installation . . . . . . . . . . . . . . . . . . . . . . 47
5.1 Unpacking the server . . . . . . . . . . . . . . . . . . . . . 48
5.2 Setting up the server . . . . . . . . . . . . . . . . . . . . . . 49
5.2.1 Positioning the server vertically . . . . . . . . . . . . . . . . . 50
5.2.2 Positioning the server horizontally . . . . . . . . . . . . . . . . 53
5.3 Connecting devices to the server . . . . . . . . . . . . . . . 54
5.4 Connecting the server to the mains . . . . . . . . . . . . . . 56
5.4.1 Using cable ties (standard PSU) . . . . . . . . . . . . . . . . . 57
5.4.2 Using the cable clamps (hot-plug PSU) . . . . . . . . . . . . . 58
Operating Manual TX1320 M3
Contents
5.5 Notes on connecting/disconnecting cables . . . . . . . . . . 59
6 Starting up and operation . . . . . . . . . . . . . . . . . . . . 61
6.1 Access to the drives . . . . . . . . . . . . . . . . . . . . . . . 61
6.2 Opening the HDD cover . . . . . . . . . . . . . . . . . . . . . 63
6.3 Controls and indicators . . . . . . . . . . . . . . . . . . . . . 64
6.3.1 Server front . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
6.3.1.1 Controls on the front panel . . . . . . . . . . . . . . . . . . 64
6.3.1.2 Indicators on the front panel . . . . . . . . . . . . . . . . . . 65
6.3.1.3 Indicators on the drives . . . . . . . . . . . . . . . . . . . . 68
6.3.2 Server rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
6.3.2.1 Indicators on the I/O panel . . . . . . . . . . . . . . . . . . 70
6.3.2.2 Indicator on hot-plug PSUs . . . . . . . . . . . . . . . . . . 74
6.3.2.3 Indicator on Fujitsu battery units (FJBU) . . . . . . . . . . . 75
6.4 ID card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
6.5 Switching the server on and off . . . . . . . . . . . . . . . . 77
6.6 Configuring the server . . . . . . . . . . . . . . . . . . . . . 80
6.6.1 Configuring the onboard SATA controller . . . . . . . . . . . . . 80
6.6.2 Configuring the SAS/SATA RAID controller . . . . . . . . . . . . 81
6.6.3 Configuring the server and installing the operating system
with the ServerView Installation Manager . . . . . . . . . . . . . 82
6.6.4 Configuring the server and installing the operating system
without the ServerView Installation Manager . . . . . . . . . . . 83
6.7 Cleaning the server . . . . . . . . . . . . . . . . . . . . . . . 84
7 Property and data protection . . . . . . . . . . . . . . . . . . 85
7.1 Mechanical access protection . . . . . . . . . . . . . . . . . 85
7.2 BIOS Setup security functions . . . . . . . . . . . . . . . . . 85
8 Troubleshooting and tips . . . . . . . . . . . . . . . . . . . . 87
8.1 Power-on indicator remains unlit . . . . . . . . . . . . . . . . 87
8.2 Server switches itself off . . . . . . . . . . . . . . . . . . . . 88
8.3 Screen remains blank . . . . . . . . . . . . . . . . . . . . . . 88
TX1320 M3 Operating Manual
Contents
8.4 Flickering stripes on monitor screen . . . . . . . . . . . . . 89
8.5 No screen display or display drifts . . . . . . . . . . . . . . 89
8.6 No mouse pointer displayed on screen . . . . . . . . . . . . 89
8.7 Incorrect date and time . . . . . . . . . . . . . . . . . . . . 90
8.8 Drives reported as “dead” when starting system . . . . . . 90
8.9 Added drive reported as defective . . . . . . . . . . . . . . 90
8.10 Error message on screen . . . . . . . . . . . . . . . . . . . 91
Operating Manual TX1320 M3
Contents
TX1320 M3 Operating Manual 9
1 Introduction
The PRIMERGY TX1320 M3 server is an Intel-based server for small and
medium-sized networks and can be used in the horizontal position or as a
desktop model.
The PRIMERGY TX1320 M3 server features exceptionally low energy
consumption, very quiet running and a compact size. As a result, it is also the
ideal solution for small offices.
Thanks to its highly developed hardware and software components, the
PRIMERGY TX1320 M3 server offers a high level of data security and
availability. This includes hot-plug HDD modules (2.5-inch variant), the
ServerView Operations Manager for server management, Prefailure Detection
and Analysing (PDA), and Automatic Server Reconfiguration and Restart
(ASR&R).
Security functions in the BIOS-setup protect the data on the server against
manipulation. Additional security is provided by the lockable drive cover.
1.1 Concept and target groups for this manual
This operating manual describes how to install, set up and operate your server.
This operating manual is intended for those responsible for installing the
hardware and ensuring that the system runs smoothly. It contains all the
information you need to put your PRIMERGY TX1320 M3 into operation.
To understand the various expansion options, you will need to be familiar with
the fields of hardware and data transmission and you will require a basic
knowledge of the underlying operating system.
10 Operating Manual TX1320 M3
Introduction
1.2 Documentation overview
More information on your PRIMERGY TX1320 M3 can be found in the following
documents:
– "Quick Start Hardware - FUJITSU Server PRIMERGY TX1320 M3"
– "ServerView Quick Start Guide"
– "Safety Notes and Regulations" manual
"安全上のご注意 " for Japan
– "Warranty" manual
"保証書 " for Japan
– "ServerView Suite Local Service Concept - LSC" manual
– "Returning used devices" manual and "Service Desk" leaflet
"サポート＆サービス " for Japan
– "FUJITSU Server PRIMERGY TX1320 M3 Upgrade and Maintenance
Manual"
– "D3373 BIOS Setup Utility for FUJITSU Server PRIMERGY TX1320 M3
Reference Manual"
IAll documentation on PRIMERGY hardware and ServerView software is
available online from the Fujitsu manuals server at:
http://manuals.ts.fujitsu.com
For Japan:
http://www.fujitsu.com/jp/products/computing/servers/primergy/manual/
The complete PRIMERGY documentation set can also be downloaded
as a DVD ISO image at:
ftp://ftp.ts.fujitsu.com/images/serverview/manuals
For Japan:
http://www.fujitsu.com/jp/products/computing/servers/primergy/downloads/
Further sources of information:
– ServerView Suite Glossary
– Manual for the monitor
– Documentation for the boards and drives
– Operating system documentation
– Information files in your operating system
Tabla de contenidos
Otros manuales de Servidor de Fujitsu
Fujitsu
Fujitsu PRIMEQUEST 2000 Series Guía
Fujitsu
Fujitsu SE500 Manual de usuario
Fujitsu
Fujitsu PRIMERGY CX400 M4 Manual de usuario
Fujitsu
Fujitsu SPARC M12 Manual de usuario
Fujitsu
Fujitsu PRIMERGY TX2550 M5 Manual de usuario
Fujitsu
Fujitsu CELVIN NAS QE807 Manual de usuario
Fujitsu
Fujitsu PRIMERGY Manual de usuario
Fujitsu
Fujitsu SPARC M12-1 Manual de usuario
Fujitsu
Fujitsu FW-S Series SERVIS Manual de usuario
Fujitsu
Fujitsu SPARC M12 Series Manual de instalación y funcionamiento
Fujitsu
Fujitsu PRIMERGY BX900 S1 Manual de usuario
Fujitsu
Fujitsu PRIMEQUEST 2000 Series Manual de usuario
Fujitsu
Fujitsu PRIMERGY Econel 200 S2 Manual del propietario
Fujitsu
Fujitsu PRIMERGY TX150 S6 Guía
Fujitsu
Fujitsu Primergy RX200 S4 Manual del propietario
Fujitsu
Fujitsu Primergy RX100 S3 Manual del propietario
Fujitsu
Fujitsu primergy h250 Manual de usuario
Fujitsu
Fujitsu PRIMERGY BX900 Manual de usuario
Fujitsu
Fujitsu primergy TX150 Manual de usuario
Fujitsu
Fujitsu PRIMERGY RX300 S7 Manual de usuario
