Fujitsu PRIMERGY CX400 M4 Manual de usuario

Operating Manual - English

FUJITSU Server PRIMERGY CX400 M4

Server Enclosure

Operating Manual

July 2017

Comments…Suggestions…Corrections…

The User Documentation Department would like to

know your opinion of this manual. Your feedback helps

us optimize our documentation to suit your individual

needs.

Feel free to send us your comments by e-mail to

[email protected]su.com.

Certified documentation

according to DIN EN ISO 9001:2008

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system

which complies with the requirements of the standard

DIN EN ISO 9001:2008.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

– The contents of this manual may be revised without prior notice.

– Fujitsu assumes no liability for damages to third party copyrights or other rights arising from

the use of any information in this manual.

– No part of this manual may be reproduced in any form without the prior written permission

of Fujitsu.

Microsoft, Windows, Windows Server, and Hyper-V are trademarks or registered trademarks of

Microsoft Corporation in the USA and other countries.

Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries

in the USA and other countries.

CX400 M4

Operating Manual

Before reading this manual

For your safety

This manual contains important information for safely and correctly using this

product.

Carefully read the manual before using this product. Pay particular attention to

the accompanying manual "Safety Notes and Regulations" and ensure these

safety notes are understood before using the product. Keep this manual and the

manual "Safety Notes and Regulations" in a safe place for easy reference while

using this product.

Radio interference

This product is a "Class A" ITE (Information Technology Equipment). In a

domestic environment this product may cause radio interference, in which case

the user may be required to take appropriate measures. VCCI-A

Aluminum electrolytic capacitors

The aluminum electrolytic capacitors used in the product's printed circuit board

assemblies and in the mouse and keyboard are limited-life components. Use of

these components beyond their operating life may result in electrolyte leakage

or depletion, potentially causing emission of foul odor or smoke.

As a guideline, in a normal office environment (25°C) operating life is not

expected to be reached within the maintenance support period (5 years).

However, operating life may be reached more quickly if, for example, the

product is used in a hot environment. The customer shall bear the cost of

replacing replaceable components which have exceeded their operating life.

Note that these are only guidelines, and do not constitute a guarantee of

trouble-free operation during the maintenance support period.

High safety use

This product has been designed and manufactured to be used in commercial

and/or industrial areas as a server.

When used as visual display workplace, it must not be placed in the direct field

of view to avoid incommoding reflections (applies only to TX server systems).

The device has not been designed or manufactured for uses which demand an

extremely high level of safety and carry a direct and serious risk of life or body

if such safety cannot be assured.

Operating Manual

CX400 M4

These uses include control of nuclear reactions in nuclear power plants,

automatic airplane flight control, air traffic control, traffic control in mass

transport systems, medical devices for life support, and missile guidance

control in weapons systems (hereafter, "high safety use"). Customers should

not use this product for high safety use unless measures are in place for

ensuring the level of safety demanded of such use. Please consult the sales

staff of Fujitsu if intending to use this product for high safety use.

Measures against momentary voltage drop

This product may be affected by a momentary voltage drop in the power supply

caused by lightning. To prevent a momentary voltage drop, use of an AC

uninterruptible power supply is recommended.

(This notice follows the guidelines of Voltage Dip Immunity of Personal

Computer issued by JEITA, the Japan Electronics and Information Technology

Industries Association.)

Technology controlled by the Foreign Exchange and Foreign Trade

Control Law of Japan

Documents produced by Fujitsu may contain technology controlled by the

Foreign Exchange and Foreign Trade Control Law of Japan. Documents which

contain such technology should not be exported from Japan or transferred to

non-residents of Japan without first obtaining authorization in accordance with

the above law.

Harmonic Current Standards

This product conforms to harmonic current standard JIS C 61000-3-2.

Only for Japan: About SATA HDDs

The SATA version of this server supports HDDs with SATA/BC-SATA storage

interfaces. Please note that the usage and operation conditions differ

depending on the type of HDD used.

Please refer to the following internet address for further information on the

usage and operation conditions of each available type of HDD:

http://jp.fujitsu.com/platform/server/primergy/harddisk/

CX400 M4

Operating Manual

Contents

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.1 Concept and target groups for this manual . . . . . . . . . . 7

1.2 Documentation overview . . . . . . . . . . . . . . . . . . . . 8

1.3 Notational conventions . . . . . . . . . . . . . . . . . . . . . 9

2 Functional overview . . . . . . . . . . . . . . . . . . . . . . 11

2.1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

2.2 Server enclosure specification . . . . . . . . . . . . . . . . 13

3 Installation steps, overview . . . . . . . . . . . . . . . . . . 19

4 Important information . . . . . . . . . . . . . . . . . . . . . 21

4.1 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . 21

4.2 ENERGY STAR . . . . . . . . . . . . . . . . . . . . . . . . . 30

4.3 CE conformity . . . . . . . . . . . . . . . . . . . . . . . . . 30

4.4 FCC Class A Compliance Statement . . . . . . . . . . . . . 31

4.5 Environmental protection . . . . . . . . . . . . . . . . . . . 32

4.6 Transporting the server enclosure . . . . . . . . . . . . . . 33

4.7 Notes on installing the server enclosure in the rack . . . . . 34

5 Hardware installation . . . . . . . . . . . . . . . . . . . . . . 35

5.1 Unpacking the server enclosure . . . . . . . . . . . . . . . 36

5.2 Installing/removing the server enclosure in/from the rack . 37

5.2.1 Mounting the server enclosure in the rack . . . . . . . . . . . . 39

5.2.2 Removing the server enclosure out of the rack . . . . . . . . . 46

Operating Manual

CX400 M4

Contents

5.3 Connecting the server enclosure to the mains . . . . . . . . 50

5.4 Notes on connecting/disconnecting cables . . . . . . . . . . 51

6 Starting up and operation . . . . . . . . . . . . . . . . . . . . 53

6.1 Overview of the server enclosure . . . . . . . . . . . . . . . 53

6.1.1 Front overview with CX2550 M4 server nodes . . . . . . . . . . 53

6.1.2 Front overview with CX2560 M4 / CX2570 M4 server nodes . . . 54

6.1.3 Rear overview with CX2550 M4 or CX2560 M4 server nodes . . 55

6.1.4 Rear overview with CX2570 M4 server nodes . . . . . . . . . . 56

6.2 Controls and indicators . . . . . . . . . . . . . . . . . . . . . 57

6.2.1 Front of the server enclosure . . . . . . . . . . . . . . . . . . . 57

6.2.1.1 Indicators on the front panel (enclosure-related) . . . . . . . 58

6.2.1.2 Indicators on the front panel (node-related) . . . . . . . . . . 60

6.2.1.3 ID card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

6.2.1.4 Indicators on the HDDs . . . . . . . . . . . . . . . . . . . . 63

6.2.2 Indicator on hot-plug PSU . . . . . . . . . . . . . . . . . . . . 64

6.2.3 Indicators of the server nodes . . . . . . . . . . . . . . . . . . 64

6.3 Switching the multi-node server system on and off . . . . . 65

6.4 Cleaning the server enclosure . . . . . . . . . . . . . . . . . 68

7 Property and data protection . . . . . . . . . . . . . . . . . . 69

7.1 BIOS setup security functions . . . . . . . . . . . . . . . . . 69

8 Troubleshooting and tips . . . . . . . . . . . . . . . . . . . . 71

8.1 Power-on indicator remains unlit . . . . . . . . . . . . . . . . 71

8.2 Drives reported as “dead” when starting system . . . . . . . 72

8.3 Added drive reported as defective . . . . . . . . . . . . . . . 72

CX400 M4

Operating Manual 7

1 Introduction

The FUJITSU Server PRIMERGY CX scale-out systems are the ideal basis for

cloud, hyper-converged and high performance computing solutions. They

provide data centers as well as branch offices with massive computing power

for virtualized environments, complex calculations as well as consolidation and

high-availabilty scenarios.

The FUJITSU Server PRIMERGY CX400 M4 helps to meet the immense

challenges now facing companies as well as research and development

institutions. The system with only 2 height units contains up to four server

nodes, 8 Intel

Xeon

Processors and 64 DDR4 memory DIMMs, thus

providing the very highest performance and energy efficiency levels.

The scale-out system can be perfectly adapted for a wide range of applications

thanks to its high degree of modularity. When requirements change, additional

server nodes, co-processor cards or hard disks can just be added. In

comparison to conventional rack servers the PRIMERGY CX400 M4 wins

through thanks to its double server density and low hardware and operating

costs. The system is thus an ideal replicable component in order to implement

large scale-out solutions.

1.1 Concept and target groups for this manual

This operating manual describes how to install, set up and operate your server

enclosure.

This operating manual is intended for those responsible for installing the

hardware and ensuring that the system runs smoothly. It contains all the

information you need to put your PRIMERGY CX400 M4 server enclosure into

operation.

To understand the various expansion options, you will need to be familiar with

the fields of hardware and data transmission and you will require a basic

knowledge of the underlying operating system.

8 Operating Manual

CX400 M4

Introduction

1.2 Documentation overview

More information on your PRIMERGY CX400 M4 server enclosure can be

found in the following documents:

– "Quick Start Hardware - PRIMERGY CX400 M4 Server Enclosure"

– "ServerView Suite Quick Start Guide"

– "Safety Notes and Regulations" manual

"安全上のご注意 " for Japan

– "Warranty" manual

"保証書 " for Japan

– "Returning used devices" manual and "Service Desk" leaflet

"サポート＆サービス " for Japan

– "FUJITSU Server PRIMERGY CX400 M4 Server Enclosure Upgrade and

Maintenance Manual"

Further information

The PRIMERGY CX400 M4 server enclosure is a multi-node system. For

information on the individual server nodes please refer to the following manuals:

– "FUJITSU Server PRIMERGY CX2550 M4 / CX2560 M4 / CX2570 M4

Server Node Operating Manual"

– "D385x BIOS Setup Utility for FUJITSU Server PRIMERGY CX2550 M4 /

CX2560 M4 / CX2570 M4" Reference Manual

– "FUJITSU Server PRIMERGY CX2550 M4 / CX2560 M4 / CX2570 M4

Server Node Upgrade and Maintenance manual"

IAll documentation on PRIMERGY hardware and ServerView software is

available online from the Fujitsu manuals server at:

http://manuals.ts.fujitsu.com

For Japan:

http://www.fujitsu.com/jp/products/computing/servers/primergy/manual/

The complete PRIMERGY documentation set can also be downloaded

as a DVD ISO image at:

ftp://ftp.ts.fujitsu.com/images/serverview/manuals

For Japan:

http://www.fujitsu.com/jp/products/computing/servers/primergy/downloads/

CX400 M4

Operating Manual 9

Introduction

Further sources of information:

– ServerView Suite Glossary

– Manual for the monitor

– Documentation for the boards and drives

– Operating system documentation

– Information files in your operating system

1.3 Notational conventions

The following notational conventions are used in this manual:

Text in italics indicates commands or menu items.

"Quotation marks" indicate names of chapters and terms that are being

emphasized.

Êdescribes activities that must be performed in the order

shown.

VCAUTION! pay particular attention to texts marked with this symbol.

Failure to observe this warning may endanger your life,

destroy the system or lead to the loss of data.

Iindicates additional information, notes and tips.

10 Operating Manual

CX400 M4

Introduction

Otros manuales para PRIMERGY CX400 M4

Tabla de contenidos

Otros manuales de Servidor de Fujitsu

Fujitsu

Fujitsu PRIMEQUEST 1000 Series Hoja de instrucciones

Fujitsu

Fujitsu Primergy RX300 S2 Manual de usuario

Fujitsu

Fujitsu PRIMERGY RX200 S3 Manual de usuario

Fujitsu

Fujitsu PRIMERGY RX2520 M5 Manual de usuario

Fujitsu

Fujitsu Primergy RX100 S5 Manual de usuario

Fujitsu

Fujitsu PRIMERGY RX300 S6 Manual de usuario

Fujitsu

Fujitsu PRIMERGY RX100 S7 Manual de usuario

Fujitsu

Fujitsu Primergy TX300 S4 Guía rápida

Fujitsu

Fujitsu PRIMERGY RX2510 M2 Manual de usuario

Fujitsu

Fujitsu Primergy TX300 S4 Manual de usuario

Fujitsu

Fujitsu Primergy BX920 S4 Manual de usuario

Fujitsu

Fujitsu PRIMERGY BX900 Manual de usuario

Fujitsu

Fujitsu PRIMERGY TX2560 M2 Manual de usuario

Fujitsu

Fujitsu Primergy RX100 S5 Guía

Fujitsu

Fujitsu Primergy RX300 S2 Guía

Fujitsu

Fujitsu D3320 PRIMERGY BX2560 M2 Manual de usuario

Fujitsu

Fujitsu 1FINITY L100 Manual de usuario

Fujitsu

Fujitsu PRIMERGY BX920 S1 Manual de usuario

Fujitsu

Fujitsu PRIMERGY 870 Manual de usuario

Fujitsu

Fujitsu SPARC Enterprise M9000 Manual de usuario

Fujitsu

Fujitsu PRIMERGY RX1330 M5 Manual de usuario

Fujitsu

Fujitsu PRIMERGY TX1330 M4 Manual de usuario

Fujitsu

Fujitsu SPARC Enterprise M4000 Manual de usuario

Fujitsu

Fujitsu Primergy Econel 100 S2 Guía

Manuales populares de Servidor de otras marcas

HP AlphaServer ES47 Manual de usuario

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

NEC

NEC Express5800/T110j Manual de usuario

HP ProLiant Gen9 Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

HP Integrity rx2600 Guía de instalación

Milestone

Milestone Husky IVO 350T Manual de usuario