Fujitsu PRIMERGY BX900 S1 Manual de usuario

Operating Manual - English

PRIMERGY BX900 S1

Blade Server

System Unit Operating Manual

Edition March 2011

Comments…Suggestions…Corrections…

The User Documentation Department would like to

know your opinion of this manual. Your feedback helps

us optimize our documentation to suit your individual

needs.

Feel free to send us your comments by e-mail to

email: [email protected].

Certified documentation

according to DIN EN ISO 9001:2008

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system

which complies with the requirements of the standard

DIN EN ISO 9001:2008.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trade names and/or trademarks of their respective

manufacturers.

– The contents of this manual may be revised without prior notice.

– Fujitsu assumes no liability for damages to third party copyrights or other rights arising from

the use of any information in this manual.

– No part of this manual may be reproduced in any form without the prior written permission

of Fujitsu.

Microsoft, Windows, Windows Server, and Hyper V are trademarks or registered trademarks of

Microsoft Corporation in the USA and other countries.

Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries

in the USA and other countries.

BX900 S1 Operating Manual

Before reading this manual

For your safety

This manual contains important information for safely and correctly using this

product.

Carefully read the manual before using this product. Pay particular attention to

the accompanying manual "Safety Notes and Regulations" and ensure these

safety notes are understood before using the product. Keep this manual and the

manual "Safety Notes and Regulations" in a safe place for easy reference while

using this product.

Radio interference

This product is a "Class A" ITE (Information Technology Equipment). In a

domestic environment this product may cause radio interference, in which case

the user may be required to take appropriate measures. VCCI-A

Aluminum electrolytic capacitors

The aluminum electrolytic capacitors used in the product's printed circuit board

assemblies and in the mouse and keyboard are limited-life components. Use of

these components beyond their operating life may result in electrolyte leakage

or depletion, potentially causing emission of foul odor or smoke.

As a guideline, in a normal office environment (25°C) operating life is not

expected to be reached within the maintenance support period (5 years).

However, operating life may be reached more quickly if, for example, the product

is used in a hot environment. The customer shall bear the cost of replacing

replaceable components which have exceeded their operating life. Note that

these are only guidelines, and do not constitute a guarantee of trouble-free

operation during the maintenance support period.

High safety use

This product has been designed and manufactured for general uses such as

general office use, personal use, domestic use and normal industrial use. It has

not been designed or manufactured for uses which demand an extremely high

level of safety and carry a direct and serious risk to life or body if such safety

cannot be ensured.

Operating Manual BX900 S1

These uses include control of nuclear reactions in nuclear power plants,

automatic airplane flight control, air traffic control, traffic control in mass

transport systems, medical devices for life support, and missile guidance control

in weapons systems (hereafter, "high safety use"). Customers should not use

this product for high safety use unless measures are in place for ensuring the

level of safety demanded of such use. Please consult the sales staff of Fujitsu if

intending to use this product for high safety use.

Measures against momentary voltage drop

This product may be affected by a momentary voltage drop in the power supply

caused by lightning. To prevent a momentary voltage drop, use of an AC

uninterruptible power supply is recommended.

(This notice follows the guidelines of Voltage Dip Immunity of Personal

Computer issued by JEITA, the Japan Electronics and Information Technology

Industries Association.)

Technology controlled by the Foreign Exchange and Foreign Trade

Control Law of Japan

Documents produced by Fujitsu may contain technology controlled by the

Foreign Exchange and Foreign Trade Control Law of Japan. Documents which

contain such technology should not be exported from Japan or transferred to

non-residents of Japan without first obtaining authorization in accordance with

the above law.

Harmonic Current Standards

This product conforms to harmonic current standard JIS C 61000-3-2.

Only for the Japanese market:

About SATA hard disk drives

The SATA version of this server supports hard disk drives with SATA / BC-SATA

storage interfaces. Please note that the usage and operation conditions differ

depending on the type of hard disk drive used.

Please refer to the following internet address for further information on the

usage and operation conditions of each available type of hard disk drive:

http://primeserver.fujitsu.com/primergy/harddisk/

BX900 S1 Operating Manual

Only for the Japanese market:

IAlthough described in this manual, some sections do not apply to the

Japanese market. These options and routines include:

– USB Flash Module (UFM)

– CSS (Customer Self Service)

– Replacing the lithium battery

Operating Manual BX900 S1

BX900 S1 Operating Manual

Contents

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

1.1 Concept and target groups for this manual . . . . . . . . . 11

1.2 Documentation overview . . . . . . . . . . . . . . . . . . . 12

1.3 Performance features . . . . . . . . . . . . . . . . . . . . . 13

1.4 Notational conventions . . . . . . . . . . . . . . . . . . . . 20

1.5 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . 21

2 Installation steps, overview . . . . . . . . . . . . . . . . . . 25

3 Important notes . . . . . . . . . . . . . . . . . . . . . . . . . 27

3.1 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . 27

3.2 CE conformity . . . . . . . . . . . . . . . . . . . . . . . . . 35

3.3 Transporting the system unit . . . . . . . . . . . . . . . . . 35

3.4 Notes on installation into the rack . . . . . . . . . . . . . . 36

3.5 Environmental protection . . . . . . . . . . . . . . . . . . . 37

4 Installing the hardware . . . . . . . . . . . . . . . . . . . . . 39

4.1 Installation procedure . . . . . . . . . . . . . . . . . . . . . 40

4.2 Unpacking the system unit . . . . . . . . . . . . . . . . . . 40

4.3 Installing the system unit in the rack . . . . . . . . . . . . . 41

4.3.1 Installation in PRIMECENTER/DataCenter rack . . . . . . . . . 44

4.3.2 Installing/removing the system unit . . . . . . . . . . . . . . . 48

4.4 Connecting devices to the system unit . . . . . . . . . . . . 51

4.4.1 Cable routing . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

4.5 Connecting the system unit to the mains . . . . . . . . . . 52

4.5.1 Using cable ties . . . . . . . . . . . . . . . . . . . . . . . . . 55

4.6 Instructions for connecting/disconnecting cables . . . . . . 56

Operating Manual BX900 S1

Contents

5 Installation and operation . . . . . . . . . . . . . . . . . . . . 57

5.1 Control and display elements . . . . . . . . . . . . . . . . . . 57

5.1.1 Front of system . . . . . . . . . . . . . . . . . . . . . . . . . . 57

5.1.1.1 Control elements . . . . . . . . . . . . . . . . . . . . . . . 61

5.1.1.2 LEDs on the control panel . . . . . . . . . . . . . . . . . . . 61

5.1.2 Back of system . . . . . . . . . . . . . . . . . . . . . . . . . . 63

5.1.2.1 Control and display elements on the management blade . . . 63

5.1.2.2 Indicators on the hot-plug power supply units . . . . . . . . . 66

5.1.2.3 Indicators on the hot-plug fans . . . . . . . . . . . . . . . . 67

5.2 Switching the system unit on/off . . . . . . . . . . . . . . . . 68

5.3 Configuring management blades . . . . . . . . . . . . . . . . 70

5.4 Cleaning the system unit . . . . . . . . . . . . . . . . . . . . 74

6 Property and data protection . . . . . . . . . . . . . . . . . . 75

7 Troubleshooting and tips . . . . . . . . . . . . . . . . . . . . 77

7.1 System power indicator does not light up . . . . . . . . . . . 77

7.2 Front or back error LED flashes orange . . . . . . . . . . . . 78

7.3 System switches itself off . . . . . . . . . . . . . . . . . . . . 79

7.4 Screen remains blank . . . . . . . . . . . . . . . . . . . . . . 79

7.5 Flickering stripes on monitor screen . . . . . . . . . . . . . 80

7.6 No screen display or display drifts . . . . . . . . . . . . . . . 80

7.7 No mouse pointer displayed on screen . . . . . . . . . . . . 80

7.8 Incorrect date and time . . . . . . . . . . . . . . . . . . . . . 81

7.9 Server blade does not boot . . . . . . . . . . . . . . . . . . . 81

7.10 Defective drive . . . . . . . . . . . . . . . . . . . . . . . . . . 82

8 Hot-plug components . . . . . . . . . . . . . . . . . . . . . . 83

8.1 Server blades and storage blades . . . . . . . . . . . . . . . 83

8.2 Connection blades . . . . . . . . . . . . . . . . . . . . . . . 91

BX900 S1 Operating Manual

Contents

8.2.1 Connection Blade GbE Switch/IBP 36/12 (SB11A) . . . . . . . 92

8.2.2 Connection Blade GbE Switch/IBP 36/8+2 (SB11) . . . . . . . 93

8.2.2.1 Connection blade stacking . . . . . . . . . . . . . . . . . . 96

8.2.3 Connection Blade 10 GbE Switch/IBP 18/8 . . . . . . . . . . . 103

8.2.4 Connection Blade 8Gb FC Switch 18/8 . . . . . . . . . . . . . 105

8.2.5 Connection Blade Ethernet Pass Thru 10Gb 18/18 . . . . . . . 107

8.2.6 Connection Blade 8Gb FC Pass Thru 18/18 . . . . . . . . . . . 110

8.2.7 Connection Blade Infiniband Switch 40 Gb 18/18 . . . . . . . 112

8.2.8 Connection Blade GbE Switch/IBP 18/6 (SB6) . . . . . . . . . 114

8.2.9 Fitting rules for connection blades . . . . . . . . . . . . . . . . 116

8.2.10 Port assignment of the connection blades . . . . . . . . . . . . 118

8.2.11 Installing a connection blade . . . . . . . . . . . . . . . . . . . 120

8.3 Management blades . . . . . . . . . . . . . . . . . . . . . . 125

8.4 Hot-plug power supply units . . . . . . . . . . . . . . . . . 126

8.4.1 Fitting rules for power supply units and fan modules . . . . . . 127

8.4.1.1 Configuration examples . . . . . . . . . . . . . . . . . . . 131

8.4.2 Replacing the power supply unit . . . . . . . . . . . . . . . . . 135

8.5 Hot-plug fan modules . . . . . . . . . . . . . . . . . . . . . 137

8.5.1 Replacing a fan unit . . . . . . . . . . . . . . . . . . . . . . . 138

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141

Operating Manual BX900 S1

Contents

Otros manuales para PRIMERGY BX900 S1

Tabla de contenidos

Otros manuales de Servidor de Fujitsu

Fujitsu

Fujitsu PRIMERGY TX2550 M5 Manual de usuario

Fujitsu

Fujitsu BS2000 SE Series Manual de usuario

Fujitsu

Fujitsu PRIMERGY RX100 S8 Manual de usuario

Fujitsu

Fujitsu Primergy RX300 S4 Guía

Fujitsu

Fujitsu BS2000/OSD Manual de usuario

Fujitsu

Fujitsu primergy TX150 Manual de usuario

Fujitsu

Fujitsu PRIMERGY TX600 Manual de usuario

Fujitsu

Fujitsu PRIMEQUEST 2000 Series Manual de usuario

Fujitsu

Fujitsu PRIMERGY BX900 Manual de usuario

Fujitsu

Fujitsu PRIMERGY CX420 S1 Manual de usuario

Fujitsu

Fujitsu PRIMERGY TX140 S1 Manual de usuario

Fujitsu

Fujitsu PRIMERGY RX600 S5 Manual de usuario

Fujitsu

Fujitsu PRIMERGY BX924 S2 Manual de usuario

Fujitsu

Fujitsu PRIMEQUEST 1000 Series Manual de servicio

Fujitsu

Fujitsu PRIMEQUEST 3800E Manual de usuario

Fujitsu

Fujitsu SPARC Enterprise T5440 Server Manual de usuario

Fujitsu

Fujitsu SPARC Enterprise T5140 Manual de usuario

Fujitsu

Fujitsu primergy h250 Manual de usuario

Fujitsu

Fujitsu BS2000 SE Series Manual de usuario

Fujitsu

Fujitsu M10 Series Manual de usuario

Fujitsu

Fujitsu SPARC Enterprise M9000 Manual de usuario

Fujitsu

Fujitsu PRIMERGY BX620 S6 Manual de usuario

Fujitsu

Fujitsu SPARC Enterprise M3000 Manual de usuario

Fujitsu

Fujitsu PRIMERGY TX200 S7 Manual de usuario

Manuales populares de Servidor de otras marcas

HP AlphaServer ES47 Manual de usuario

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

NEC

NEC Express5800/T110j Manual de usuario

HP ProLiant Gen9 Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

HP Integrity rx2600 Guía de instalación

Milestone

Milestone Husky IVO 350T Manual de usuario