Fujitsu PRIMERGY GX2560 M7 Manual de usuario

Fujitsu Server PRIMERGY GX2560 M7

Upgrade and Maintenance Manual

Upgrade and Maintenance Manual - English

11/2023

Comments… Suggestions… Corrections…

The User Documentation Department would like to know your opinion of this manual. Your

feedback helps us optimize our documentation to suit your individual needs.

Feel free to send us your comments by e-mail to [email protected].

Documentation creation according to ISO 9001 and ISO 27001

To ensure high quality and information security standards while creating documentation, the

quality management system and information security management system of Etteplan are

certified in compliance with ISO 9001 and ISO 27001.

Etteplan Germany GmbH | www.etteplan.com

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

–The contents of this manual may be revised without prior notice.

–Fujitsu assumes no liability for damages to third party copyrights or other rights arising from

the use of any information in this manual.

–No part of this manual may be reproduced in any form without the prior written permission

of Fujitsu.

Microsoft, Windows, Windows Server, and Hyper-V are trademarks or registered trademarks of

Microsoft Corporation in the USA and other countries.

Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries

in the USA and other countries.

Before reading this manual

For your safety

This manual contains important information for safely and correctly using this

product.

Carefully read the manual before using this product. Pay particular attention to

the accompanying manual "Safety Notes and Regulations" and ensure that

these safety notes are understood before using the product. Keep this manual

and the "Safety Notes and Regulations" manual in a safe place for easy

reference while using this product.

Radio interference

This product is a "Class A" ITE (Information Technology Equipment). In a

domestic environment this product may cause radio interference, in which case

the user may be required to take appropriate measures.

VCCI-A

Aluminum electrolytic capacitors

The aluminum electrolytic capacitors used in the printed circuit board

assemblies of the product and in the mouse and keyboard are limited-life

components. Use of these components beyond their operating life may result

in electrolyte leakage or depletion, potentially causing emission of foul odor or

smoke.

As a guideline, in a normal office environment (25 °C) operating life is not

expected to be reached within the maintenance support period (5 years).

However, operating life may be reached more quickly if, for example, the

product is used in a hot environment. The customer shall bear the cost of

replacing replaceable components which have exceeded their operating life.

Note that these are only guidelines, and do not constitute a guarantee of

trouble-free operation during the maintenance support period.

High safety use

This product has been designed and manufactured to be used in commercial

and/or industrial areas as a server.

GX2560 M7 Upgrade and Maintenance Manual

The product is not suitable for use at visual display workplaces according to §2

of the Workplace Regulations (applies to all server systems except TX server

systems).

When used as visual display workplace, it must not be placed in the direct field

of view to avoid incommoding reflections (applies only to TX server systems).

The device has not been designed or manufactured for uses which demand an

extremely high level of safety and carry a direct and serious risk of life or body

if such safety cannot be assured.

These uses include control of nuclear reactions in nuclear power plants,

automatic airplane flight control, air traffic control, traffic control in mass

transport systems, medical devices for life support, and missile guidance

control in weapons systems (hereafter, "high safety use"). Customers should

not use this product for high safety use unless measures are in place for

ensuring the level of safety demanded of such use. Please consult the sales

staff of Fujitsu if intending to use this product for high safety use.

Measures against momentary voltage drop

This product may be affected by a momentary voltage drop in the power supply

caused by lightning. To prevent a momentary voltage drop, the use of an

uninterruptible power supply is recommended.

(This notice follows the guidelines of Voltage Dip Immunity of Personal

Computer issued by JEITA, the Japan Electronics and Information Technology

Industries Association.)

Technology controlled by the Foreign Exchange and Foreign Trade

Control Law of Japan

Documents produced by Fujitsu may contain technology controlled by the

Foreign Exchange and Foreign Trade Control Law of Japan. Documents which

contain such technology should not be exported from Japan or transferred to

non-residents of Japan without first obtaining authorization in accordance with

the above law.

Harmonic Current Standards

This product conforms to harmonic current standard JIS C 61000-3-2.

Upgrade and Maintenance Manual GX2560 M7

Only for Japan: About SATA HDDs

The SATA version of this server supports HDDs with SATA/BC-SATA storage

interfaces. Please note that the usage and operation conditions differ

depending on the type of HDD used.

For more information on the usage and operation conditions of each available

type of HDD, see the following internet address:

https://jp.fujitsu.com/platform/server/primergy/harddisk/

Only for Japan:

Shielded LAN cables should be used in this product.

UK Importer information

Fujitsu Services Limited

22 Baker Street, London, W1U 3BW, United Kingdom

GX2560 M7 Upgrade and Maintenance Manual

Version history

Issue

number

Issue date Description

V 1.0 11/2023 Initial release

Upgrade and Maintenance Manual GX2560 M7

Content

1 Introduction 15

1.1 Concept and target groups of this manual 15

1.2 Notational conventions 15

2 Before you start 17

2.1 Basic information 17

2.1.1 Proceeding 17

2.1.2 Installing optional components 17

2.1.3 Replacing a defective component 18

2.2 Classification of procedures 18

2.2.1 Assignment of unit categories 18

2.2.2 Customer Replaceable Units (CRU) 18

2.2.3 Upgrade and Repair Units (URU) 19

2.2.4 Field Replaceable Units (FRU) 20

2.3 Average task duration 21

2.4 Tools you need at hand 22

2.5 Documentation overview 22

2.5.1 Downloading manuals 22

2.5.2 List of documents 22

3 Important information 25

3.1 Introduction 25

3.2 Safety instructions 25

3.2.1 Basic safety instructions 25

3.2.2 Before starting up 26

3.2.3 Installation and operation 26

GX2560 M7 Upgrade and Maintenance Manual

3.2.4 Batteries 29

3.2.5 Modules with Electrostatic-Sensitive Devices (ESD modules) 29

3.2.6 Transporting the server 31

3.2.7 Installing the server in the rack 32

3.2.8 Other important information 32

3.3 CE conformity 33

3.4 FCC Class A Compliance Statement 33

3.5 Environmental protection 34

4 Basic hardware procedures 37

4.1 Using diagnostic information 37

4.1.1 Proceeding 37

4.1.2 Locating the defective server 37

4.1.3 Locating the defective component 37

4.2 Shutting down the server 38

4.3 Disconnecting the power cord 38

4.4 Getting access to the component 39

4.4.1 Safety notes 39

4.4.2 Extending the server out of the rack 39

4.4.3 Removing the server from the rack 41

4.4.4 Removing top covers 45

4.5 Reassembling 49

4.5.1 Safety notes 49

4.5.2 Installing top covers 49

4.5.3 Installing the server in the rack 51

4.5.4 Sliding the server into the rack 54

4.6 Connecting the power cord 56

4.7 Switching on the server 58

Content

Upgrade and Maintenance Manual GX2560 M7

4.8 Handling the air duct 58

4.8.1 Removing the air duct 58

4.8.2 Installing the air duct 59

4.9 Handling the riser module 62

4.9.1 Removing the riser module 62

4.9.2 Installing the riser module 64

4.10 Handling the crossbar 66

4.10.1 Removing the crossbar 66

4.10.2 Installing the crossbar 68

4.11 Handling the fan cage 69

4.11.1 Removing the fan cage 69

4.11.2 Installing the fan cage 76

4.12 Handling the HDD cage 85

4.12.1 Removing the HDD cage 85

4.12.2 Installing the HDD cage 86

5 Basic software procedures 89

5.1 Starting the maintenance task 89

5.1.1 Disabling the boot watchdog 89

5.1.2 Verifying and configuring the backup software solution 90

5.1.3 Backing up the setting information of BIOS or BMC 90

5.1.4 Switching on the UID indicators 90

5.2 Completing the maintenance task 91

5.2.1 Updating the BIOS and BMC 91

5.2.2 Enabling the boot watchdog 94

5.2.3 Verifying the system time settings 94

5.2.4 Viewing and clearing the System Event Log (SEL) 95

5.2.5 Using the Chassis ID Prom Tool 96

5.2.6 Updating the NIC configuration file in a Linux environment 97

5.2.7 Performing a RAID array rebuild 98

5.2.8 Looking for the MAC address of a LAN controller 99

5.2.9 Switching off the UID identicators 100

Content

GX2560 M7 Upgrade and Maintenance Manual

6 Power supply unit (PSU) 103

6.1 Safety notes 103

6.2 Basic information 103

6.3 Replacing a hot-plug PSU 104

6.4 Replacing the power distribution board 107

7 Hard disk drive (HDD) / solid state disk (SSD) 115

7.1 Safety notes 115

7.2 Basic information 116

7.3 Handling HDDs or SSDs 116

7.3.1 2.5-inch HDD/SSD and 2.5-inch installation frame 116

7.4 Overview of configurations 119

7.4.1 Configuration with up to six HDD/SSD modules 119

7.5 Installing 2.5-inch HDD/SSD modules 119

7.6 Removing 2.5-inch HDD/SSD modules 121

7.7 Replacing a 2.5-inch HDD/SSD module 124

7.8 Replacing the 6x 2.5-inch HDD backplane 126

8 Fans 131

8.1 Safety notes 131

8.2 Basic information 132

8.3 Replacing a fan module 132

Content

Upgrade and Maintenance Manual GX2560 M7

Tabla de contenidos

Otros manuales de Servidor de Fujitsu

Fujitsu

Fujitsu PRIMERGY RX300 S6 Manual de usuario

Fujitsu

Fujitsu SPARC Enterprise T5120 Guía de instalación

Fujitsu

Fujitsu PRIMERGY BX400 S1 Manual de usuario

Fujitsu

Fujitsu PRIMERGY TX200 S7 Guía del usuario

Fujitsu

Fujitsu PRIMERGY TX300 S7 Manual de usuario

Fujitsu

Fujitsu Primergy RX600 S2 Manual de usuario

Fujitsu

Fujitsu SPARC EnterpriseM3000 Manual de usuario

Fujitsu

Fujitsu PRIMERGY RX200 S8 Guía del usuario

Fujitsu

Fujitsu SPARC Enterprise M8000 Guía de instalación

Fujitsu

Fujitsu PRIMERGY RX2450 M1 Manual de usuario

Fujitsu

Fujitsu PRIMERGY Econel 100 Manual de usuario

Fujitsu

Fujitsu PRIMERGY RX1330 M4 Manual de usuario

Fujitsu

Fujitsu T2555SC020IN Manual de usuario

Fujitsu

Fujitsu SPARC Enterprise M3000 Manual de usuario

Fujitsu

Fujitsu FUTRO S940 Manual de usuario

Fujitsu

Fujitsu BS2000 SE Series Manual de usuario

Fujitsu

Fujitsu PRIMEPOWER 650 Guía de referencia rápida

Fujitsu

Fujitsu SPARC Enterprise T2000 Manual de servicio

Fujitsu

Fujitsu PRIMERGY TX150 S8 Guía del usuario

Fujitsu

Fujitsu SPARC Enterprise M3000 Guía de instalación

Fujitsu

Fujitsu PRIMERGY ECONEL 30 Manual de usuario

Fujitsu

Fujitsu PRIMERGY RX2540 M2 Manual de usuario

Fujitsu

Fujitsu Primergy RX200 S4 Manual de usuario

Fujitsu

Fujitsu PRIMERGY BX600 Guía

Manuales populares de Servidor de otras marcas

HP AlphaServer ES47 Manual de usuario

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

NEC

NEC Express5800/T110j Manual de usuario

HP ProLiant Gen9 Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

HP Integrity rx2600 Guía de instalación

Milestone

Milestone Husky IVO 350T Manual de usuario