Fujitsu Primergy BX2560 M1 Manual de usuario

Operating Manual - English

FUJITSU Server PRIMERGY BX2560 M1

Server Blade

Operating Manual

November 2014

Comments…Suggestions…Corrections…

The User Documentation Department would like to

know your opinion of this manual. Your feedback helps

us optimize our documentation to suit your individual

needs.

Feel free to send us your comments by e-mail to

email: [email protected].

Certified documentation

according to DIN EN ISO 9001:2008

To ensure a consistently high quality standard and

user-friendliness, this documentation was created to

meet the regulations of a quality management system

which complies with the requirements of the standard

DIN EN ISO 9001:2008.

cognitas. Gesellschaft für Technik-Dokumentation mbH

www.cognitas.de

Delivery subject to availability; right of technical modifications reserved.

All hardware and software names used are trademarks of their respective manufacturers.

– The contents of this manual may be revised without prior notice.

– Fujitsu assumes no liability for damages to third party copyrights or other rights arising from

the use of any information in this manual.

– No part of this manual may be reproduced in any without the prior written permission of

Fujitsu.

Microsoft, Windows, Windows Server, and Hyper V are trademarks or registered trademarks of

Microsoft Corporation in the USA and other countries.

Intel and Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries

in the USA and other countries.

BX2560 M1

Operating Manual

Before reading this manual

For your safety

This manual contains important information for safely and correctly using this

product.

Carefully read the manual before using this product. Pay particular attention to

the accompanying manual "Safety Notes and Regulations" and ensure these

safety notes are understood before using the product. Keep this manual and the

manual "Safety Notes and Regulations" in a safe place for easy reference while

using this product.

Radio interference

This product is a "Class A" ITE (Information Technology Equipment). In a

domestic environment this product may cause radio interference, in which case

the user may be required to take appropriate measures. VCCI-A

Aluminum electrolytic capacitors

The aluminum electrolytic capacitors used in the product's printed circuit board

assemblies and in the mouse and keyboard are limited-life components. Use of

these components beyond their operating life may result in electrolyte leakage

or depletion, potentially causing emission of foul odor or smoke.

As a guideline, in a normal office environment (25°C) operating life is not

expected to be reached within the maintenance support period (5 years).

However, operating life may be reached more quickly if, for example, the

product is used in a hot environment. The customer shall bear the cost of

replacing replaceable components which have exceeded their operating life.

Note that these are only guidelines, and do not constitute a guarantee of

trouble-free operation during the maintenance support period.

High safety use

This product has been designed and manufactured to be used in commercial

and/or industrial areas as a server.

When used as visual display workplace, it must not be placed in the direct field

of view to avoid incommoding reflections (applies only to TX server systems).

The device has not been designed or manufactured for uses which demand an

extremely high level of safety and carry a direct and serious risk of life or body

if such safety cannot be assured.

Operating Manual

BX2560 M1

These uses include control of nuclear reactions in nuclear power plants,

automatic airplane flight control, air traffic control, traffic control in mass

transport systems, medical devices for life support, and missile guidance

control in weapons systems (hereafter, "high safety use"). Customers should

not use this product for high safety use unless measures are in place for

ensuring the level of safety demanded of such use. Please consult the sales

staff of Fujitsu if intending to use this product for high safety use.

Measures against momentary voltage drop

This product may be affected by a momentary voltage drop in the power supply

caused by lightning. To prevent a momentary voltage drop, use of an AC

uninterruptible power supply is recommended.

(This notice follows the guidelines of Voltage Dip Immunity of Personal

Computer issued by JEITA, the Japan Electronics and Information Technology

Industries Association.)

Technology controlled by the Foreign Exchange and Foreign Trade

Control Law of Japan

Documents produced by Fujitsu may contain technology controlled by the

Foreign Exchange and Foreign Trade Control Law of Japan. Documents which

contain such technology should not be exported from Japan or transferred to

non-residents of Japan without first obtaining authorization in accordance with

the above law.

Harmonic Current Standards

This product conforms to harmonic current standard JIS C 61000-3-2.

Only for the Japanese market:

About SATA hard disk drives

The SATA version of this server supports hard disk drives with SATA / BC-SATA

storage interfaces. Please note that the usage and operation conditions differ

depending on the type of hard disk drive used.

Please refer to the following internet address for further information on the

usage and operation conditions of each available type of hard disk drive:

http://jp.fujitsu.com/platform/server/primergy/harddisk/

BX2560 M1

Operating Manual

Only for the Japanese market:

IAlthough described in this manual, some sections do not apply to the

Japanese market. These options and routines include:

– CSS (Customer Self Service)

Operating Manual

BX2560 M1

Operating Manual

Contents

1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

1.1 Concept and target groups for this manual . . . . . . . . . . 9

1.2 Documentation overview . . . . . . . . . . . . . . . . . . . 10

1.3 Notational conventions . . . . . . . . . . . . . . . . . . . . 11

2 Functional overview . . . . . . . . . . . . . . . . . . . . . . 13

2.1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

2.2 Server specification . . . . . . . . . . . . . . . . . . . . . . 21

3 Installation steps, overview . . . . . . . . . . . . . . . . . . 27

4 Important information . . . . . . . . . . . . . . . . . . . . . 29

4.1 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . 29

4.2 CE conformity . . . . . . . . . . . . . . . . . . . . . . . . . 35

4.3 FCC class A device . . . . . . . . . . . . . . . . . . . . . . . 36

4.4 Transporting the Server Blade . . . . . . . . . . . . . . . . 36

4.5 Notes on installation in the system unit . . . . . . . . . . . 36

4.6 Environmental protection . . . . . . . . . . . . . . . . . . . 37

5 Hardware installation . . . . . . . . . . . . . . . . . . . . . . 39

5.1 Unpacking the server blade . . . . . . . . . . . . . . . . . . 40

5.2 Installing the server blade in the system unit . . . . . . . . 40

5.3 Connecting devices . . . . . . . . . . . . . . . . . . . . . . 44

5.4 Instructions for connecting/disconnecting cables . . . . . . 45

Operating Manual

BX2560 M1

Contents

6 Starting up and operation . . . . . . . . . . . . . . . . . . . . 49

6.1 Control and display elements . . . . . . . . . . . . . . . . . 49

6.2 Switching the Server Blade on and off . . . . . . . . . . . . . 54

6.3 Configuring the Server Blade . . . . . . . . . . . . . . . . . . 55

6.3.1 Preparing for local installation . . . . . . . . . . . . . . . . . . 55

6.3.2 Preparation for remote installation to use Advanced Video

Redirection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

6.3.3 Configuring the onboard SATA controller . . . . . . . . . . . . . 58

6.3.4 Configuring the SAS/SATA RAID controller . . . . . . . . . . . . 58

6.3.5 Configuring the onboard CNA controller . . . . . . . . . . . . . 59

6.3.6 Configuring the server and installing the operating system

with the ServerView Installation Manager . . . . . . . . . . . . . 59

6.3.7 Configuring the server and installing the operating system

without ServerView Installation Manager . . . . . . . . . . . . . 61

6.4 Cleaning the Server Blade . . . . . . . . . . . . . . . . . . . 62

7 Property and data protection . . . . . . . . . . . . . . . . . . 63

7.1 BIOS Setup security functions . . . . . . . . . . . . . . . . . 63

8 Troubleshooting and tips . . . . . . . . . . . . . . . . . . . . 65

8.1 Server switches itself off . . . . . . . . . . . . . . . . . . . . 65

8.2 Screen remains blank . . . . . . . . . . . . . . . . . . . . . . 65

8.3 Flickering stripes on monitor screen . . . . . . . . . . . . . 66

8.4 No screen display or display drifts . . . . . . . . . . . . . . . 67

8.5 Incorrect date and time . . . . . . . . . . . . . . . . . . . . . 67

8.6 System will not boot . . . . . . . . . . . . . . . . . . . . . . . 67

8.7 Hard disk drive error messages at system boot . . . . . . . 68

8.8 Added drive reported as defective . . . . . . . . . . . . . . . 68

8.9 Error message on screen . . . . . . . . . . . . . . . . . . . . 68

BX2560 M1

Operating Manual 9

1 Introduction

The PRIMERGY BX2560 M1 server blade is an Intel-based dual-socket server

blade. It is ideal for use in data centers belonging to enterprises or Internet

service providers, and makes an excellent large application server, terminal

server for compute-intensive applications or DBMS server.

Security functions in the BIOS Setup protect the data on the server blade from

unauthorized changes.

The server blade occupies only one bay in the PRIMERGY BX900/BX400

system unit.

IYou can find information about assembling, starting up and operating the

system unit in the relevant operating manual.

1.1 Concept and target groups for this manual

This operating manual describes how to install, set up and operate your server

blade.

This operating manual is intended for those responsible for installing the

hardware and ensuring that the system runs smoothly. It contains all the

information you need to put your PRIMERGY BX2560 M1 server blade into

operation.

To understand the various expansion options, you will need to be familiar with

the fields of hardware and data transmission and you will require a basic

knowledge of the underlying operating system.

10 Operating Manual

BX2560 M1

Introduction

1.2 Documentation overview

More information on your PRIMERGY BX2560 M1 server blade can be found in

the following documents:

– "ServerView Quick Start Guide"

– "Safety Notes and Regulations" manual

"安全上のご注意 " for the Japanese market

– "Warranty" manual

"保証書 " for the Japanese market

– "PRIMERGY ServerView Suite Local Service Concept - LSC" manual

– "Returning used devices" manual and "Service Desk" leaflet

"サポート＆サービス " for the Japanese market

– FUJITSU Server PRIMERGY BX2560 M1 Server Blade Upgrade and

Maintenance Manual

– D3320 BIOS Setup Utility for FUJITSU Server PRIMERGY BX2560 M1

Reference Manual

– "LSI MegaRAID - SAS Software User Guide"

– "Modular RAID Controller / Modular SAS HBA Installation Guide"

IAll documentation on PRIMERGY hardware and ServerView software is

available online from the Fujitsu manuals server at:

– For the global market http://manuals.ts.fujitsu.com

– For the Japanese market:

http://jp.fujitsu.com/platform/server/primergy/manual

The complete PRIMERGY documentation set can also be downloaded

as a DVD ISO image at:

– For the global market: ftp://ftp.ts.fujitsu.com/images/serverview/manuals

– For the Japanese market: http://jp.fujitsu.com/primergy/downloads

IFor the Japanese market:

Before using the product, please check for additional information that

may be available under the following URL:

http://jp.fujitsu.com/platform/server/primergy/products/note/

Tabla de contenidos

Otros manuales de Servidor de Fujitsu

Fujitsu

Fujitsu PRIMERGY TX150 S5 Manual del propietario

Fujitsu

Fujitsu PRIMERGY BX900 Manual de usuario

Fujitsu

Fujitsu PRIMERGY RX330 S1 Manual del propietario

Fujitsu

Fujitsu PRIMERGY CX400 M4 Manual de usuario

Fujitsu

Fujitsu PRIMERGY RX100 S8 Manual de usuario

Fujitsu

Fujitsu PRIMERGY BX620 S6 Manual del propietario

Fujitsu

Fujitsu SPARC Enterprise M8000 Manual de usuario

Fujitsu

Fujitsu SPARC Enterprise T5440 Server Instrucciones de montaje

Fujitsu

Fujitsu SE700 Manual de usuario

Fujitsu

Fujitsu PRIMERGY RX600 S6 Manual de usuario

Fujitsu

Fujitsu PRIMERGY BX922 S2 Manual de usuario

Fujitsu

Fujitsu PRIMEQUEST 2000 Series Manual de usuario

Fujitsu

Fujitsu Primergy RX100 S4 Manual de usuario

Fujitsu

Fujitsu PRIMERGY TX150 S6 Guía

Fujitsu

Fujitsu PRIMERGY GX2460 M1 Manual de usuario

Fujitsu

Fujitsu BS2000 Manual de usuario

Fujitsu

Fujitsu PRIMERGY TX140 S1p Manual de usuario

Fujitsu

Fujitsu PRIMERGY RX2540 M4 Manual de usuario

Fujitsu

Fujitsu PRIMERGY GX2560 M7 Manual de usuario

Fujitsu

Fujitsu SPARC ENTERPRISE T5220 Manual de usuario

Fujitsu

Fujitsu SPARC Enterprise M3000 Manual de usuario

Fujitsu

Fujitsu PRIMEQUEST 520A Manual técnico

Fujitsu

Fujitsu PRIMERGY TX150 S5 Manual de usuario

Fujitsu

Fujitsu PRIMERGY RX600 S3 Manual de usuario

Manuales populares de Servidor de otras marcas

HP AlphaServer ES47 Manual de usuario

Dell

Dell PowerEdge R410 Manual de usuario

PowerNAS

PowerNAS CMA Manual de usuario

Supero

Supero FatTwin F617R3-FT Manual de usuario

MSI

MSI P1-109N-L70 Manual de usuario

Dell

Dell PowerEdge XE9640 Manual

Dell

Dell PS4100 Instrucciones de montaje

EtroVISION

EtroVISION EV3151 Manual de usuario

NEC

NEC Express5800/T110j Manual de usuario

HP ProLiant Gen9 Manual de usuario

Compaq

Compaq ProLiant 3000 Manual

Dell

Dell PowerEdge 3YPMN Manual de usuario

iRobo

iRobo IPC2U Manual de usuario

Nortel

Nortel 1000 Con?guration guide Manual de usuario

Asus

Asus AP7500 Manual de operación y mantenimiento

Avid Technology

Avid Technology AirSpeed 5000 Manual de usuario

HP Integrity rx2600 Guía de instalación

Milestone

Milestone Husky IVO 350T Manual de usuario