Fujitsu ScanSnap S1300 Manual de usuario
Getting Started
P3PC-2712-03EN
1
Thank you for purchasing ScanSnap S1300 (hereinafter referred to as "the ScanSnap"). This manual describes
the preparation required for use of the ScanSnap. Follow the preparation procedures described in this manual.
For details about ScanSnap functions and features, basic operation, daily care, and consumable replacement,
refer to the Operator's Guide (PDF) which is available on the Setup DVD-ROM. Keep this manual in a safe place
so that you can refer to it at any time when using the ScanSnap.
Microsoft, Windows, Windows Vista, Excel, and PowerPoint are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
Apple, the Apple logo, Mac, Mac OS, iPhoto, and Rosetta are trademarks of Apple Inc.
ABBYY™ FineReader™ Engine ©2011 ABBYY. OCR by ABBYY
ABBYY and FineReader are trademarks of ABBYY.
Other company names and product names are the registered trademarks or trademarks of the respective companies.
August 2011
© PFU LIMITED 2009-2011
Checking the Components
Make sure that all items shown below are included in the package.
If any other packaging is provided, make sure to store it as well. Make sure to handle the components with care.
The box and packaging materials are required for storage and transportation of the ScanSnap. Do not throw them
away.
If anything is missing or damaged, contact your FUJITSU scanner dealer or an authorized FUJITSU scanner
service provider.
ScanSnap (× 1)
USB cable (× 1)
AC adapter (× 1)
AC cable (× 1) (*)
Setup DVD-ROM
(× 1)
Getting Started (× 1)
(This manual)
Safety Precautions (× 1)
USB bus power cable
(× 1)
(*) The contents may vary depending on the
country and the ScanSnap model purchased.
Rack2-Filer (× 1)
(Exclusive to S1300 with
Rack2-Filer)
Power cable
S1300_Soft_e_GS_JP_EN.fm Page 1 Tuesday, July 12, 2011 2:59 PM
2
Read the Safety Precautions
Before using the ScanSnap, make sure to read and
understand the information provided in the "Safety
Precautions" document.
Symbols Used in This Manual
The following symbols are used in this manual.
Referring to the "Operator's
Guide"
To refer to the "Operator’s Guide", insert the Setup DVD-
ROM in to the DVD-ROM drive, and follow the procedure
below.
Click the [Manuals] button in the [ScanSnap Setup]
dialog box, and then the [Operator's Guide] button.
Double-click the [Operator's Guide] icon in the
[ScanSnap] window.
Installing the Software
Windows®Installation (Jpage 2)
Mac OS Installation (Jpage 4)
■Software
You can install the following software.
zScanSnap Manager (Scanner driver)
z
ScanSnap Organizer (File management
application)
zCardMinder (Business card management
application)
zABBYY FineReader for ScanSnap™ (OCR
application)
To use Evernote for Windows and/or Scan to
Microsoft SharePoint, the required software should
also be installed.
For details about each software and its installation
procedures, refer to "Installing the Software" in the
Operator's Guide.
Symbol Description
This indication alerts operators to an
operation that, if not strictly observed, may
result in safety hazards to personnel or
damage to the product.
This symbol alerts operators to particularly
important information. Be sure to read this
information.
This symbol alerts operators to helpful
advice regarding operations.
This symbol indicates operations using
Windows®.
This symbol indicates operations using
Mac OS.
CAUTION
Do not connect the ScanSnap to your
computer before installing the software.
When you export the data scanned by
ScanSnap to your mobile device, download
ScanSnap Connect Application for mobile from
an application store (such as the App Store).
Windows
®
Installation
S1300_Soft_e_GS_JP_EN.fm Page 2 Tuesday, July 12, 2011 2:59 PM
3
■System Requirements
*1: Service Pack 2 or later is required
*2: Service Pack 4 or later is required
*3: For
Windows Vista
®
, if .NET Framework 3.5 SP1 is not
installed, a maximum of 500 MB of additional free hard
disk space is required for it.
For Windows®XP, if .NET Framework 3.5 SP1 is not
installed, a maximum of 530 MB of additional free hard
disk space is required for it.
For Windows®2000, if .NET Framework 2.0 is not
installed, a maximum of 310 MB of additional free hard
disk space is required for it.
*4: When using USB 3.0 port, it works as USB 2.0.
■Installation
1. Turn on the computer and log on as a user
with Administrator privileges.
2. Insert the Setup DVD-ROM into the DVD-
ROM drive.
DThe [ScanSnap Setup] dialog box appears.
3. Click the [Install Products] button.
DThe [Install Products] dialog box appears.
4. Click the [ScanSnap] button.
Follow the instructions on the screen to continue
with the installation.
If installation is not completed successfully, click the
[Manuals] button in the [ScanSnap Setup] dialog box,
and then the [Troubleshooting (installation)] button,
and refer to Troubleshooting (installation).
Operating
system
z
Windows
®
7 (32-bit/64-bit)
z
Windows Vista
®
(32-bit/64-bit)
z
Windows
®
XP (32-bit) (*1)
z
Windows
®
2000 (*2)
CPU
Intel®Core™ 2 Duo 2.2 GHz or higher
recommended
(Minimum: Intel® Pentium®4 1.8 GHz)
Memory
Windows
®
7
(32-bit/64-bit)
32-bit: 1 GB or more
64-bit: 2 GB or more
Windows Vista® (32-bit/64-bit)
Windows®XP (32-bit)
Windows®2000
512 MB or more
(1 GB or more recommended)
Display
resolution
800 × 600 pixels or higher
Hard disk
space (*3)
2220 MB or more of free hard disk
space is required
(2670 MB or more of free hard disk
space is required for using with
Rack2-Filer)
USB port (*4) USB2.0/USB1.1
z
If the CPU or the memory do not meet the
required specifications, or the type of USB port
or USB hub is USB 1.1, the scanning speed will
slow down.
z
When the font size is large, some screens may
not be displayed properly. In that case, use a
smaller font size.
z
The actual increase in used disk space after
installation and the required disk space for
installation may differ from each other
depending on your Windows
®
system disk
management.
If the [ScanSnap Setup] dialog box does
not appear, double-click
"ScanSnap.exe" in the DVD-ROM via
Windows Explorer.
S1300_Soft_e_GS_JP_EN.fm Page 3 Tuesday, July 12, 2011 2:59 PM
4
■Software
You can install the following software.
zScanSnap Manager (Scanner driver)
zABBYY FineReader for ScanSnap™ (OCR
application)
zCardiris™for ScanSnap (Business card text-
recognized application)
To use Evernote for Mac, it should also be installed.
For details about each software and its installation
procedures, refer to "Installing the Software" in the
Operator's Guide.
■System Requirements
*1: It is recommended to apply the latest updates to Mac
OS.
*2: When using USB 3.0 port, it works as USB 2.0.
■Installation
1. Turn your computer on and log on as a
user with Administrator privileges.
2. Insert the Setup DVD-ROM into the DVD-
ROM drive.
DThe [ScanSnap] window appears.
3. Double-click the [ScanSnap] icon.
Follow the instructions on the screen to continue
with the installation.
Mac OS Installation
Operating
system (*1)
z
Mac OS X v10.7
z
Mac OS X v10.6
z
Mac OS X v10.5
z
Mac OS X v10.4
CPU
Intel®Core™ 2 Duo 2.4 GHz or higher
recommended
(Minimum: Intel®Core™ Duo 1.83 GHz,
PowerPC® G5 1.6 GHz)
Memory
Mac OS X v10.7
2 GB or more
Mac OS X v10.6
1 GB or more
Mac OS X v10.5
Mac OS X v10.4
512 MB or more
(1 GB or more recommended)
Display
resolution
1024 × 768 pixels or higher
Hard disk
space 1555 MB or more of free hard disk space
USB port (*2) USB 2.0/USB 1.1
If the CPU or the memory do not meet the
required specifications, or the type of USB
port or USB hub is USB 1.1, the scanning
speed will slow down.
S1300_Soft_e_GS_JP_EN.fm Page 4 Tuesday, July 12, 2011 2:59 PM
5
Connecting the ScanSnap
1. Select the power cable type according to
power source for the ScanSnap.
zTo use the ScanSnap at a fixed location
Use the power cable to connect to an AC outlet.
For details about the connection, refer to "Using
the Power Cable" (page 5) in Step 3.
zTo use the ScanSnap in a remote location with
your laptop computer or a place without AC
outlets available nearby
Use the USB bus power cable for power supply
from your computer.
For details about the connection, refer to "Using the
USB Bus Power Cable" (page 5) in Step 3.
2. Remove the tape seal covering the USB
connector and power connector of the
ScanSnap.
3. Connect cables to the ScanSnap.
zUsing the Power Cable
1. Connect the power cable to the power
connector of the ScanSnap and plug in the
AC outlet.
2. Connect the USB cable to the USB
connector on the ScanSnap and the USB
port on your computer.
zUsing the USB Bus Power Cable
1. Connect the USB bus power cable to the
power connector on the ScanSnap and the
USB port on your computer.
2. Connect the USB cable to the USB
connector on the ScanSnap and the USB
port on your computer.
z
Only one ScanSnap can be used by a
computer at a time.
z
Use only the cable supplied with the ScanSnap.
CAUTION
Do not use AC adapters other than the one
supplied with this ScanSnap. Doing so may cause
damage to the ScanSnap.
Manufacturer: LEI
Model No.: NU13-1072166-I3
AC Cable
AC
Adapter
USB Bus
Power Cable
z
To power on the ScanSnap, the USB
cable and either of the power cables
(power cable or USB bus power cable)
need to be connected.
z
When connecting to USB hub, make sure
to connect the ScanSnap to the USB hub
which is connected to a USB port of your
computer. Use a powered USB hub (with
AC adapter).
z
If USB port or USB hub is USB 1.1,
scanning speed will slow down.
z
Connect the USB cable with the USB
mark facing up.
S1300_Soft_e_GS_JP_EN.fm Page 5 Tuesday, July 12, 2011 2:59 PM
6
4. Open the ADF paper chute (cover) of the
ScanSnap.
DThe ScanSnap is powered on and the [Scan]
button lights in blue.
5. Check the ScanSnap Manager icon.
DThe ScanSnap Manager icon appears on the
taskbar.
DThe ScanSnap Manager icon appears in the
Dock.
Scan Test
For details on documents that can be scanned with
the ScanSnap and how to load documents, refer to
"ScanSnap Overview" in the Operator's Guide.
1. Load a document in the ScanSnap.
1. Pull up the extension.
2. Slide open the side guides of the right and
left.
The bottom of the ScanSnap may
become hot when the ScanSnap is
used. This heat does not affect
ScanSnap operation or cause any
physical harm directly. Be careful not to
drop the ScanSnap when hold the
bottom for carrying the ScanSnap.
The icon varies depending on the power
source to be used.
For power cable connection:
For USB bus power cable connection:
In Windows®7, the ScanSnap Manager
icon is displayed in the menu which
appears when you click on the
taskbar.
To have the ScanSnap Manager icon
always displayed on the taskbar, drag
the icon and drop it onto the taskbar.
[Scan] Button
ADF Paper Chute
(Cover)
The icon varies depending on the power
source to use.
For power cable connection:
For USB bus power cable connection:
Extension
Side Guides
S1300_Soft_e_GS_JP_EN.fm Page 6 Tuesday, July 12, 2011 2:59 PM
7
3. Load the document on the ADF paper chute
(cover), and adjust the side guides to the size
of the document.
2. Press the [Scan] button on the ScanSnap.
DScanning starts. The Quick Menu appears
when scanning is completed.
3. In the Quick Menu, click the icon of the
application to link with ScanSnap
Manager.
DThe selected application is started.
Confirm that ScanSnap Manager is linked with the
application that was selected from the Quick Menu.
If scanning does not start, refer to
"Troubleshooting" in the ScanSnap
Manager Help.
Set the document
face-down and top-first
S1300_Soft_e_GS_JP_EN.fm Page 7 Tuesday, July 12, 2011 2:59 PM
8
Contact for Inquiries
zABBYY FineReader for ScanSnap™
For inquiries regarding ABBYY FineReader for
ScanSnap™, refer to the contact list by
proceeding to the following.
From the [Start] menu, select the [All Programs]
J[ABBYY FineReader for ScanSnap (TM) 4.1]
J[User's Guide] J[Technical Support] J
[ABBYY Offices].
From the Finder window, select the
[Applications] J[ABBYY FineReader for
ScanSnap] J[FineReader for ScanSnap
Preferences] J[Help] J[FineReader for
ScanSnap Help] J[ABBYY Offices].
zCardiris™ for ScanSnap
For inquiries regarding Cardiris™ for ScanSnap,
refer to the following Web page:
http://www.irislink.com/support
zEvernote
For inquiries regarding Evernote, refer to the
following Web page:
http://www.evernote.com/about/contact/support/
zGoogle Docs™
For inquiries regarding Google Docs™, refer
to the Docs Help or the Help forum by clicking
on the Help link in Google Docs™.
zSalesforce
Contact your Salesforce system administrator.
For other inquiries, refer to the FUJITSU Office
contact list on the last page of the Safety Precautions
manual.
S1300_Soft_e_GS_JP_EN.fm Page 8 Tuesday, July 12, 2011 2:59 PM
Otros manuales para ScanSnap S1300
4
Tabla de contenidos
Otros manuales de Escáner de Fujitsu
Fujitsu
Fujitsu S510 - ScanSnap - Document Scanner Manual
Fujitsu
Fujitsu FI-5530C2 Guía de configuración
Fujitsu
Fujitsu FI-4010CU Manual de usuario
Fujitsu
Fujitsu Fi-5110EOX2 - ScanSnap! - Document Scanner Manual de usuario
Fujitsu
Fujitsu fi-6000N Guía de configuración
Fujitsu
Fujitsu C150-E146-02EN Manual
Fujitsu
Fujitsu FI 4220C - Document Scanner Manual de usuario
Fujitsu
Fujitsu ScanPartner Jr. C Manual del propietario
Fujitsu
Fujitsu FI-5015C Manual de usuario
Fujitsu
Fujitsu S1500 - ScanSnap Deluxe Bundle Guía
Fujitsu
Fujitsu fi-4340C Manual
Fujitsu
Fujitsu fi-4750L Manual
Fujitsu
Fujitsu M3097DE Manual
Fujitsu
Fujitsu S1500 - ScanSnap Deluxe Bundle Manual de usuario
Fujitsu
Fujitsu S510M - ScanSnap - Document Scanner Manual
Fujitsu
Fujitsu fi-5650C Guía de configuración
Fujitsu
Fujitsu S1500 - ScanSnap Deluxe Bundle Manual de usuario
Fujitsu
Fujitsu fi-60F Manual
Fujitsu
Fujitsu Fujitsu fi-5950 Manual
Fujitsu
Fujitsu FI 4220C - Document Scanner Manual
Manuales populares de Escáner de otras marcas
Infinite Peripherals
Infinite Peripherals INFINEA TAB M Manual de usuario
Mustek
Mustek PageExpress 4800 Pro Manual de usuario
Optex
Optex 750830 Manual de usuario
Innova
Innova 5210 Manual de usuario
Visioneer
Visioneer CardReader 100 Guía de inicio rápido
Rohde & Schwarz
Rohde & Schwarz TSME6 Manual de usuario