Fujitsu ScanSnap FI-4110EOX2 Guía de referencia

Fujitsu ScanSnap Installation Procedures

Windows 98SE\ME\2000\XP

Rev 082808A Page 1 of 1

This document is intended for installing the following models of Fujitsu ScanSnap scanners.

Fi-4110EOX2

Hardware requirements.

You will need a PC system that meets our recommended specifications. For recommended

PC system specifications please reference the Scanner Hardware Reference page. You may

also need your Operating System Disk.

Step 1:

Option A: Installing the drivers from the Setup CD.

Before connecting the scanner to the computer we recommend installing the scanning

applications first before installing the driver (ScanSnap Manager). After the applications and

drivers are installed Proceed to step 2.

Installing Adobe Acrobat.

1. Insert the Adobe Acrobat Setup CD into your CD Rom.

2. Next click the Install Acrobat button and follow the prompts.

3. Do not reboot at this time!

4. Eject the Acrobat CD and go to the next step.

Installing ScanSnap Manger, Organizer, and Cardminder.

1. Insert the ScanSnap Setup CD into your CD Rom.

2. Next click the Install Products button on the Scanner Setup Menu.

3. Follow the prompts and install the ScanSnap Manager, Organizer, and Cardminder.

4. Once all of the above has been completed then remove the Scansnap Setup CD,

Reboot your system, and go to Step 2.

Option B: Installing the drivers from our Web Page.

If you no longer have your setup CD then please contact our Technical Support Department to

download the current drivers or to receive a replacement CD.

Step 2: Connecting the Scanner.

Connect the USB cable to the scanner and the USB port of your PC. Ensure that the cable is

securely fastened at both ends.

Finally connect the power cord to the scanner and a wall outlet then turn on the scanner. The

New Hardware wizard will pop up. Select search for the driver automatically and follow the

prompts. Since the driver is already installed on the hard drive you do not select search the

Internet. When completed you will see the Scansnap icon in the system tray (lower right of your

screen).

Step 3: Scanning with Scansnap.

1. Right click on the Scansnap icon in the system tray, then left click on settings.

2. After the Scansnap Manger Screen has opened, click on the Application tab and

using the down arrow select Adobe Acrobat.

Fujitsu ScanSnap Installation Procedures

Windows 98SE\ME\2000\XP

Rev 082808A Page 2 of 2

3. Next click on the Save tab and verify that the Image saving folder location is where

you want the scanned images saved. If not use the Browse button to pick a different

location.

4. If you wish to name the files yourself instead of using the autoname function then

click in the white box next to Rename file after scan.

5. Next click on the Scanning tab. This is where you select the resolution, color,

and single or double-sided modes. If you click on the option button you will find

more advance settings like blank page removal, image deskew, rotation, and

ADF page orientation.

6. Clicking on the File tab allows you to select PDF or JPEG. PDF is the default when

Adobe Acrobat is selected.

7. The Paper size tab is where you can select Automatic page size detection (the

default), predefined page sizes, or custom page sizes (custom button).

8. Lastly, the Compression tab allows for image compression under certain modes.

9. To save your selections click o.k. or Save Current Settings

10. Place your documents in the ADF and press the Scan button on the scanner. The

documents will be feed through the scanner and Adobe Acrobat application will

automatically launch and display the scanned images.

11. If you selected the Rename file after scan then the Save As box will appear, enter a

file name and click save. Afterwards click on the Scanned results box when it

appears.

12. To test the other scanning applications repeat steps 1 –12, and select the application

you wish to use under the Application tab.

Special note: Scanner control is done with the ScanSnap Manager. The scanned image is

obtained with the scanning application.

Congratulations! You have successfully completed and tested your scanner installation.

*If you do not have any unzipping software installed on your system, you can download a free

evaluation copy at www.winzip.com

Otros manuales para ScanSnap FI-4110EOX2

Tabla de contenidos

Otros manuales de Escáner de Fujitsu

Fujitsu

Fujitsu ScanSnap S1300 Manual de usuario

Fujitsu

Fujitsu fi-4860C Manual de usuario

Fujitsu

Fujitsu fi-5220C Guía de configuración

Fujitsu

Fujitsu M3099EX Manual de usuario

Fujitsu

Fujitsu ScanSnap fi-5110C Manual de usuario

Fujitsu

Fujitsu fi-5530C - Document Scanner Manual de usuario

Fujitsu

Fujitsu ScanSnap iScanner fi-6010N Guía de configuración

Fujitsu

Fujitsu S1500M - ScanSnap - Document Scanner Manual de usuario

Fujitsu

Fujitsu 6240 - fi - Document Scanner Manual

Fujitsu

Fujitsu ScanSnap iX500 Manual

Fujitsu

Fujitsu fi-5650C Manual

Fujitsu

Fujitsu ScanPartner 3091DC Manual de usuario

Fujitsu

Fujitsu SCANSNAP iX1300 Manual de usuario

Fujitsu

Fujitsu FI-5015C Manual

Fujitsu

Fujitsu FI-6670A Manual de usuario

Fujitsu

Fujitsu fi 5750C - Document Scanner Guía de configuración

Fujitsu

Fujitsu M3096E+ Manual

Fujitsu

Fujitsu FI-4010CU Manual de usuario

Fujitsu

Fujitsu ScanSnap S1100i Instrucciones de montaje

Fujitsu

Fujitsu FI-4990C Manual

Fujitsu

Fujitsu ScanSnap iScanner fi-6010N Manual de usuario

Fujitsu

Fujitsu fi-60F Manual de usuario

Fujitsu

Fujitsu ScanSnap S1300i Manual de usuario

Fujitsu

Fujitsu fi-4750L Manual

Manuales populares de Escáner de otras marcas

Plustek

Plustek Scanner Manual de usuario

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manual de usuario

Renkforce

Renkforce DS100-5M Manual de usuario

Image Access

Image Access WideTEK A2 Manual de usuario

Canon

Canon imageFORMULA CR-120N Manual de usuario

GeoSlam

GeoSlam ZEB Horizon Instrucciones de instalación

Kodak

Kodak i5800 Scanner Manual de usuario

Kodak

Kodak i7300 Manual de usuario

Revopoint

Revopoint POP Manual de usuario

Eddyfi Technologies

Eddyfi Technologies Floormap X Manual de usuario

Faselase

Faselase F6 Manual de usuario

Uniden

Uniden BC340CRS Manual de usuario

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manual de usuario

Mustek

Mustek PageExpress 4800 Pro Manual de usuario

Optex

Optex 750830 Manual de usuario

Innova

Innova 5210 Manual de usuario

Visioneer

Visioneer CardReader 100 Guía de inicio rápido

Rohde & Schwarz

Rohde & Schwarz TSME6 Manual de usuario