Follett HCD710ABS Manual de usuario

Order parts online

www.follettice.com

self-contained

01113240R02

801 Church Lane • Easton, PA 18040, USA

Toll free (877) 612-5086 • +1 (610) 252-7301

www.follettice.com

Horizon Elite™Ice Machine Models with RIDE™Technology

Installation Instructions for Ice Storage Bins

HMD/HCD710ABS, HCC1010ABS, HMC1010ABS, HCC1410ABS, HMC1410ABS,

HCC1010WBS, HMC1010WBS, HCC1410WBS, HMC1410WBS,

HCE1010ABS, HME1010ABS, HCE1410ABS, HME1410ABS,

HCE1010WBS, HME1010WBS, HCE1410WBS, HME1410WBS

(See model number congurator on page 2 for details.)

2self-contained BIN • RIDE Technology

CAUTION!

§This appliance should be connected by a qualied person in accordance with applicable codes.

§If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly

qualied persons in order to avoid a hazard.

§Connect to potable water supply only.

§This appliance can be used by children aged 8 years and above and persons with reduced physical,

sensory, or mental capabilities, or lack of experience and knowledge if they have been given supervision

or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children

should be supervised to ensure that they do not play with the appliance.

§This appliance is intended to be used for household and similar applications such as staff kitchen areas

in shops, offices and other working environments; farm houses and by clients in hotels, motels and other

residential type environments; bed and breakfast type environments; catering and similar non-retail

applications.

§WARNING! To avoid a hazard due to instability of the appliance, it must be xed in accordance with the

instructions.

ConfigurationApplication

S RIDE™

(RIDE remote

ice delivery

equipment)

T Top-mount

425 up to

425 lbs

(193 kg)

710 up to

675 lbs

(306 kg)

1010 up to

1061 lbs

(482 kg)

1410 up to

1466 lbs

(665 kg)

1810 up to

1790 lbs

(812 kg)

2110 up to

2039 lbs

(925 kg)

V Vision™

H Harmony™

B Ice storage bin

J Drop-in

M Ice Manager

diverter valve

system

P Cornelius Profile

PR150

CondenserSeriesVoltageIcemaker

C 208-230/60/1 (icemaking head)

Self-contained only.

D 115/60/1 (icemaking head)

Self-contained and remote. If remote

unit, high side is 208-230/60/1.

E 230/50/1 (icemaking head)

Self-contained only.

F 115/60/1 (icemaking head)

Remote only. High side is

208-230/60/3.

MC Maestro™

Chewblet®

(425 Series)

HC Horizon

Chewblet

(710, 1010,

1410, 1810,

2110 Series)

HM Horizon

Micro Chewblet

HC 1810D SVA

A Air-cooled, self-contained

W Water-cooled, self-contained

R Air-cooled, remote condensing unit

N Air-cooled, no condensing unit for

connection to parallel rack system

Chewblet®Ice Machine Model Number Configurations

BIN • RIDE Technology self-contained 3

5 6

Read and complete the following 8 installation steps

Front coverInternal connection

External connection

Louvered docking assembly

Bin preparation

Site preparationUnpack

Ice transport tube

4self-contained BIN • RIDE Technology

Carefully unpack and inspect the contents of your Follett ice machine. 1

Unpack

7/16"

➊➋➌

➍➎

➏➐

DO NOT TILT ICE MACHINE

TO ACCESS BOLTS!

COMPRESSOR DAMAGE

WILL RESULT

Unpack ice machine

1. 1

BIN • RIDE Technology self-contained 5

Prepare the installation site. 2

➊

➋

➌

➍

requires 15A circuit,

1.50 mm

wire

H_E1410A/W

‡

requires 20A circuit,

4.00 mm

wire

2 ft. x 1" OD

silicone tubing

and ttings

provided

1/4" per foot

(6,4 mm per 0,3 m)

H_C1410A/W

H_C1010A/W

NEMA

6-20

NEMA

6-15

H_D710A

NEMA

5-15

H_C1010A/W

Site preparation

2.1

Provide drainage, water supply and electrical power to within 6 feet (2m)

of ice machine in accordance with local and national codes. Outdoor

installation is not recommended and will void warranty.

Electrical ➊

• H_C1010/1410(A/W)BS 208-230/60 • H_D710ABS 115/60

• H_E1010/1410(A/W)BS 230/50‡Requires dedicated 15A circuit.

(H_E1010A/W requires 15A dedicated circuit 1.50 mm2wire, H_E1410A/W requires 20A dedicated circuit 4.00 mm2wire)

‡ Plug must be provided by end user & must conform to standard EN 60 335-2-24 of the end destination.

Potable water supply ➋(3/8” push-in internal connection, 3/8” OD tubing required)

• 10-70 psi (69-483kpa)

• 45 to 90 F (7 to 32 C)

• Follett recommends the use of an in-line water ltration system (item# 00130286)

• This equipment is to be installed with adequate backow protection to comply with applicable

federal, state, and local codes

Condenser water supply for water-cooled systems ➌ (1/4” FPT inlet, 1/4” FPT outlet)

• 10 psi min.; 150 psi max. (69kpa min.; 1034kpa max.)

• 45 to 90 F (7 to 32 C)

• 1.5 gallons per minute (5.68 liters per minute)

Drain ➍ (3/4” Barb)

• Minimum 8” radius on silicone drain line. Drain line from the ice machine must have at least

1/4” per foot pitch (6,4mm/0,3m).

Installation site requirements

2.1

6self-contained BIN • RIDE Technology

Prepare the bin 3

Bin preparation

• Remove protective tape from gaskets

Bin top preparation

3.1

➋

➊

➌

• Apply gaskets ➊

• Install shuttle actuator ➋ through

dispenser top and secure with locking nut

➌

Bin top preparation

3.2

BIN • RIDE Technology self-contained 7

Louvered docking assembly 4

Install the louvered docking assembly.

Wall bracket accessory Machine stand accessory

• Mount louvered docking assembly to wall

bracket accessory

• Mount louvered docking assembly to

machine stand accessory

Prior to installing the louvered docking assembly, ensure that the

drain tting is oriented (right or left) correctly for your installation.

An optional straight drain tting is also supplied. You may need to

remove the back panel of the docking assembly in order to re-orient

or change the drain tting. Replace back panel prior to mounting the

docking assembly.

BEFORE PROCEEDING

8self-contained BIN • RIDE Technology

Ice transport tube

Install the ice transport tube. 5

1' (0,3m)

➋

➌

➑

➒

➓

➊

➍

➏

➐

➎

Hot Water

160 F (71 C)

1/4˝ (6,4mm)

Ice transport tube tips

• Insulate entire length of ice transport tube ➊

• Secure ice transport tube ➋as needed to prevent dips and traps from forming. For long tube

runs see guide on page 14.

• Pitch ice transport tube at least 1/4" per foot (6,4mm/.3m) ➌

• Ice transport tube must drain towards ice machine

Ice transport tube to bin

• Be sure tube ends are square ➍

• Heat end of transport tube in cup of 160 F (71 C) hot water to soften and spread with pliers ➎

before making connection to ease assembly

• Push ice transport tube onto ice machine nipple ➏

• Install hose clamp ➐

Ice transport tube to Ice machine

• Be sure tube ends are square ➑

• Heat end of transport tube in cup of 160 F (71 C) hot water to soften and spread with pliers ➎

before making connection to ease assembly

• Push ice transport tube onto ice machine nipple ➒

• Install hose clamp ➓

Ice transport tube installation

5.1

BIN • RIDE Technology self-contained 9

Connect utilities to louvered docking assembly. 6

External connections

➊

➏

➌

➋

➐

➑

3/4" barb x 3/4" FPT

1" Stand pipe/Drain

2 ft. x 1" OD

silicone tubing

Minimum 8"

radius

3/4" MPT x 1" slip

➍

➎

➌

➋

➊

➏

3/4" barb x 3/4" FPT

1" Stand pipe/Drain

2 ft. x 1" OD

silicone tubing

Minimum 8"

radius

➍

3/4" MPT x 1" slip

➎

Air-cooled ice machines only Water-cooled ice machines only

6.1 6.2

• Rough-in ice machine potable water

supply ➊.

3/8” push-in connection will be made at

shut-off valve inside machine

• Remove access panel if necessary ➋.

• Connect the silicone tubing to the ice

machine 3/4” drain barb ➌.

• Assemble the 3/4” barb x 3/4” FPT to the

3/4” MPT x 1” slip. Connect the other end

of the silicone tubing to the 3/4” barb ➍.

• Connect the 1” slip tting to the 1” stand

pipe/drain ➎.

Note: Minimum 8” radius on silicone

drain line. Drain line from the ice machine

must have at least 1/4” per foot pitch

(6,4mm/0,3m).

• Apply Petrol-gel to barbed drain tting ➏

• Replace access panel.

• Rough-in ice machine potable water

supply ➊.

3/8” push-in connection will be made at

shut-off valve inside machine

• Remove access panel if necessary ➋.

• Connect the silicone tubing to the ice

machine 3/4” drain barb ➌.

• Assemble the 3/4” barb x 3/4” FPT to the

3/4” MPT x 1” slip. Connect the other end

of the silicone tubing to the 3/4” barb ➍.

• Connect the 1” slip tting to the 1” stand

pipe/drain ➎.

Note: Minimum 8” radius on silicone

drain line. Drain line from the ice machine

must have at least 1/4” per foot pitch

(6,4mm/0,3m).

• Connect cooling water supply ➏and

return ➐

• Apply Petrol-gel to barbed drain tting ➑

• Replace access panel.

10 self-contained BIN • RIDE Technology

Connect louvered docking assembly to ice

machine. 7

Internal connections

Air-cooled ice machines – follow steps 7.1 through 7.5.

CAUTION

• Plug must be accessible after nal installation.

• H_E1410A/W 230/50/1 requires a 20A circuit (4.00 mm2wire)

• Remove twist tie

• Carefully pass cord thru opening and plug

into wall outlet

• For H_E units, install a suitable plug

Power cord

7. 3

➊

➋

• Slide ice machine into louvered docking

assembly ensuring that drain tube is fully

seated on barbed drain tting ➊

• Insert ice transport tube all the way into

coupling and tighten nut rmly ➋

Ice transport tube

7. 1

➊

• Insert potable water line into valve ➊

Potable water and drain lines

7. 2

• Position plate into opening and secure

with supplied screw

Power cord

7. 4

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Máquina de hielo de Follett

Follett

Follett 230V 50Hz Suplemento

Follett

Follett Horizon Elite Chewblet HCD1410RBT Manual de usuario

Follett

Follett L60417 Manual de operación

Follett

Follett C20001 Manual de operación

Follett

Follett Horizon Elite HCD1810NHT Manual de usuario

Follett

Follett Horizon Elite 1410 Series Manual de operación

Follett

Follett HCE1400A Manual de operación

Follett

Follett HCE1400A Manual de operación

Follett

Follett Horizon Elite Chewblet HCD1010RMS Manual de usuario

Follett

Follett Maestro Plus P425 Manual de usuario

Follett

Follett HCD1000R Manual de operación

Follett

Follett Horizon Elite 1010 Series Manual de usuario

Follett

Follett C33985 Manual de operación

Follett

Follett Horizon Elite HCD1810RHS Manual de usuario

Follett

Follett Symphony 12 Series Guía de configuración

Follett

Follett HMD710ABT Manual de usuario

Follett

Follett HCE Manual de operación

Follett

Follett Horizon Elite 1810 Series Manual de usuario

Follett

Follett HCC1400A Manual de operación

Follett

Follett Horizon Elite HMD1010R/N Manual de operación

Follett

Follett H58642 Manual de operación

Follett

Follett MCC400A Guía de configuración

Follett

Follett Maestro Manual de usuario

Follett

Follett Horizon Elite 1010 Series Manual de usuario

Manuales populares de Máquina de hielo de otras marcas

Hoshizaki

Hoshizaki KMD-460MWJ Manual de usuario

Sub-Zero

Sub-Zero 315I Instrucciones de uso

Unold

Unold 48945 Manual de usuario

Kenmore

Kenmore 2217402A Manual de usuario

Cornelius

Cornelius WM600 Instrucciones de funcionamiento

GE XPIO43SCSS Manual de usuario

Hoshizaki

Hoshizaki KMD-901MAH Manual de usuario

Whynter

Whynter FIM-450HA Manual de usuario

U-Line

U-Line UMCR014-SC01A Manual de instalación

Andrew James

Andrew James AJ000522 Manual de usuario

Scotsman

Scotsman CME1356 Manual de usuario

Scotsman

Scotsman ACM 25 Manual de usuario

Kärcher

Kärcher IP 120 Manual de usuario

U-Line

U-Line SS1095 Manual de usuario

Maytag

Maytag MIM1554WRS - Ice Maker Manual de usuario

Hoshizaki

Hoshizaki KM-630MAH Manual de usuario

Princess

Princess Yonanas Manual de usuario

Unold

Unold 48946 Manual de usuario