Flying Industry Development S1PF3-DC12 Manual de usuario

SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD

Http://www.carymart.com E-Mail: sale@carymart.com

RF Wireless Remote Control DC Motor Controller / Transmitter & Receiver

This is the DC motor controller. The DC motor controller can remote control one DC motor (DC12V/24V) rotates in positive/ reversal direction.

You can connect two restrictive switches to receiver and use them to stop motor rotation.

Package Include:

1 x Receiver: S1PF3-DC12 / S1PF3-DC24

2 x Transmitter: CWC-3

1 x User manual

Features:

Wireless control, easy to install

Waterproof case

With high power of 30A

Control DC motors of rolling blinds / doors, projection screens, awnings, pumps, winches, conveyors or other appliances and mechanicals with

voltage DC12V / 24V.

You can rotate the motor in positive or reversal direction with the transmitter (remote control) from any place within a reliable distance; the

wireless signal can pass through walls, floors and doors.

Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.

One/several transmitters can control one/several receivers simultaneously.

If you use two or more receivers in the same place, you can set them with different codes.

Transmitting Frequency: 315MHz / 433MHz

Receiver:

Model No.: S1PF3-DC12 / S1PF3-DC24

Coding Type: Fixed code or learning code

Coding Setting: By learning

Power Supply (Operating Voltage): DC12V±1V (S1PF3-DC12), DC24V±1V (S1PF3-DC24)

Output: DC12V (S1PF3-DC12), DC24V (S1PF3-DC24)

Case Size: 100mm x 67mm x 39mm

Quiescent Current: 5mA

Rated Current: 15A

The Maximum Instantaneous Current of Starting Motor: 30A

Transmitter:

Model No.: 0021102(CWC-3)

Channel: 3 CH

Waterproof

Remote Control Distance: 50m / 300ft (theoretically)

Encode: Fixed code by soldering

Unit Size: 58mm x 30mm x 12mm

Power Supply: 1 x 23A -12V battery (included, can be used for 12 months)

Usage:

Power supply:

Connect power supply DC12V / 24V to terminal “INPUT”; connect motor to terminal “OUTPUT”. You can exchange the output wires of motor to

change the rotating direction of motor.

Function of transmitter:

Press button ▲on remote: terminal “Output” output DC power, motor rotates in positive direction.

Press button ▼on remote: terminal “Output” output DC power, motor rotates in reversal direction.

Press button on remote: motor stops.

Function of manual buttons in receiver:

Press button K3 in receiver: terminal “Output” output DC power, motor rotates in positive direction.

Press button K1 in receiver: terminal “Output” output DC power, motor rotates in reversal direction.

Press button K2 in receiver: motor stops.

Restrictive function:

You can connect two restrictive switches to terminals “X1”and “X2”, if the restrictive switch X1 or X2 is connected, the motor will rotate; if the

restrictive switch X1 or X2 is disconnected, the motor will stop automatically. That means when the restrictive switch “X1”is connected, the motor

will rotate in positive direction; when the restrictive switch “X1”is disconnected, motor will stop automatically. When the restrictive switch “X2”is

connected, the motor will rotate in reversal direction; when the restrictive switch “X2”is disconnected, motor will stop automatically.

Learning the button of transmitter:

1) Press and hold “K3” button of receiver; when signal LED on the receiver begin to shine, release “K3”button. Before signal LED shines 5

seconds, press ▲button of transmitter, if the signal LED off, that means learning is successful.

2) Press and hold “K2” button of receiver; when signal LED on the receiver begin to shine, release “K2”button. Before signal LED shines 5

seconds, press button of transmitter, if the signal LED off, that means learning is successful.

SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD

Http://www.carymart.com E-Mail: sale@carymart.com

3) Press and hold “K1” button of receiver; when signal LED on the receiver begin to shine, release “K1”button. Before signal LED shines 5

seconds, press ▼button of transmitter, if the signal LED off, that means learning is successful.

Delete the button of transmitter:

We have learned transmitter to the receiver. If you don’t want the receiver to work with transmitter, you can delete all codes of transmitter which

are stored in the receiver. You can operate as following:

Press and hold “K3” button of receiver; when signal LED on the receiver begin to shine, then flicker, finally off, that means deleting is successful.

Press and hold “K2” button of receiver; when signal LED on the receiver begin to shine, then flicker, finally off, that means deleting is successful.

Press and hold “K1” button of receiver; when signal LED on the receiver begin to shine, then flicker, finally off, that means deleting is successful.

Note: Before you change from motor rotates in positive direction to reversal direction or from motor rotates in reversal direction to positive

direction, you should stop rotating of motor firstly, then remote control motor.

Signal LED

Relay 1

Relay 2

Application Circuit

OUTPUT

RF module

Antenna

INPUT

Power supply

DC Motor

Restrictive switches

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Mando a distancia de Flying Industry Development

Flying Industry Development

Flying Industry Development 0020080 Manual de usuario

Flying Industry Development

Flying Industry Development 15S1PXB-DC12+1CP-15 Manual de usuario

Flying Industry Development

Flying Industry Development S1UD-DC06 Manual de usuario

Flying Industry Development

Flying Industry Development 0020703 Manual de usuario

Flying Industry Development

Flying Industry Development S1T-AC110 Manual de usuario

Flying Industry Development

Flying Industry Development 002028 Manual de usuario

Flying Industry Development

Flying Industry Development S1X-DC06 Manual de usuario

Flying Industry Development

Flying Industry Development S1F2-DC06 Manual de usuario

Flying Industry Development

Flying Industry Development S2U-DC06-ANT2 Manual de usuario

Flying Industry Development

Flying Industry Development 6S2UB-DC12+1CV-12 Manual de usuario

Flying Industry Development

Flying Industry Development Z-06 Manual de usuario

Flying Industry Development

Flying Industry Development S1UD-DC06 Manual de usuario

Flying Industry Development

Flying Industry Development 0020481 Manual de usuario

Flying Industry Development

Flying Industry Development S1PX-DC-ANT2 Manual de usuario

Flying Industry Development

Flying Industry Development S1PF-DC12 Manual de usuario

Flying Industry Development

Flying Industry Development S2T-DC06-ANT1 Manual de usuario

Flying Industry Development

Flying Industry Development 0020109 Manual de usuario

Flying Industry Development

Flying Industry Development 0020386 Manual de usuario

Flying Industry Development

Flying Industry Development S1XB-DC06-ANT2 Manual de usuario

Flying Industry Development

Flying Industry Development 0020167 Manual de usuario

Flying Industry Development

Flying Industry Development 0020210 Manual de usuario

Flying Industry Development

Flying Industry Development S4PUA-AC220 Manual de usuario

Flying Industry Development

Flying Industry Development S4C-DC06 Manual de usuario

Flying Industry Development

Flying Industry Development S1XB-AC220-ANT2 Manual de usuario

Manuales populares de Mando a distancia de otras marcas

Panasonic

Panasonic EUR7622KB0 Manual de usuario

Bang & Olufsen

Bang & Olufsen Beo4 Manual de usuario

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manual de usuario

Multiplex

Multiplex PROFI TX 9 Manual de usuario

One Remote

One Remote RMB4 Manual de usuario

FUTABA

FUTABA 9ZAP - PART2 Manual de usuario

HR Matic

HR Matic HR MULTI 3 Manual de usuario

Yamaha

Yamaha ACC-GNRST-30-20 Manual de usuario

EisSound

EisSound KBSOUND Manual de usuario

Marantz

Marantz RC101 Manual de usuario

Conrad

Conrad FS20 TC6 Manual de usuario

Anritsu

Anritsu MP1777A Manual de usuario

Niles

Niles WVC100 Guía de solución de problemas

RCA

RCA RCU1300 Manual de usuario

Bang & Olufsen

Bang & Olufsen BEO6 Manual de usuario

GE 94901 Manual de usuario

Onbon

Onbon YQ1-75 Manual de usuario

FUTABA

FUTABA R7108SB Instrucciones de instalación