Fluke 73 III Manual de usuario

Supplement

Manual Title: 73 Series III Instruction Sheet

Part Number: 1646063 Supplement Issue: 1

Print Date: Feb. 2002 Issue Date: 8/04

Revision/Date: Page Count: 3

This supplement contains information

necessary to ensure the accuracy of the

above manual.

73 Series III Instruction Sheet Supplement

8/04 1

Change #1

On the first panel, under Warning, add the following:

Do not use this meter in a manner not

specified by the instruction sheet or the

protection provided by the meter may be

impaired.

Under General Specifications, change the following:

From: Shock, Vibration per MIL-T-PRF 28800F

Class III, Sinusoidal,

Non Operating.

To: Vibration per MIL-PRF-28800 for

a Class II instrument.

Shock 1 Meter drop per IEC

61010-1:2001.

From: Safety 600 VCAT II per

ANS/ISA S82.01-1994,

EN 61010-1: 1993, CSA

C22.2 No 1010.1-92,

UL 3111-1.

To: Safety Complies with ANSI/ISA

S82.01-2004, CSA 22.2

No. 1010.1:2004 to 600

V Overvoltage Category

II, listed to UL61010-1.

Licensed by TÜV to

EN61010-1.

Change #2

Under Continuity Test ( R):

Change: (resistance <210 e)

To: (resistance <150 e)

Supplement 73 Series III Instruction Sheet

2 8/04

Change #3

On the first panel, under Safety Information, add the

following:

•If this product is used in a manner not specified by the

manufacturer, the protection provided by the

equipment may be impaired.

•Before use, verify the meter’s operation by measuring

a known voltage.

•Avoid working alone.

•Adhere to local and national safety codes. Individual

protective equipment must be used to prevent shock

and arc blast injury where hazardous live conductors

are exposed.

On the first panel, under Safety Information, replace the first

bullet:

From: Never use the meter if the meter or test leads look

damaged.

To: Do not use the meter if it is damaged. Before you

use the meter, inspect the case. Look for cracks or

missing plastic. Pay particular attention to the

insulation surrounding the connectors.

Inspect the test leads for damaged insulation or

exposed metal. Check the test leads for continuity.

Replace damaged test leads before you use the

meter.

On the first panel, prior to the Warning, add the following

Caution:

Caution

To avoid possible damage to the meter

or to the equipment under test, follow

these guidelines:

73 Series III Instruction Sheet Supplement

8/04 3

•Disconnect circuit power and discharge

all high-voltage capacitors before testing

resistance,continuity, or diodes.

•Use the proper terminals, function, and

range for your measurements.

•Before measuring current, check the

meter’s fuses and turn power OFF to the

circuit before connecting the meter to the

circuit.

Tabla de contenidos

Otros manuales de Instrumento de medición de Fluke

Fluke

Fluke ScopeMeter 123B Instrucciones de funcionamiento

Fluke

Fluke 481 Manual de usuario

Fluke

Fluke 5618B Manual de usuario

Fluke

Fluke 362 Manual de usuario

Fluke

Fluke 374 FC Manual de usuario

Fluke

Fluke Cable Analyzer DTX-ELT Manual de usuario

Fluke

Fluke 1736 Manual de usuario

Fluke

Fluke 165X Manual de usuario

Fluke

Fluke 9142 Manual de usuario

Fluke

Fluke 279 FC Manual de usuario

Fluke

Fluke PM6690 Manual de usuario

Fluke

Fluke 772 Manual de uso y cuidado

Fluke

Fluke 336 Manual técnico

Fluke

Fluke 789 Manual de uso y cuidado

Fluke

Fluke VR101S Manual de usuario

Fluke

Fluke 175 Manual de usuario

Fluke

Fluke 5790A Manual de usuario

Fluke

Fluke 55XXA/COIL 50 Manual de usuario

Fluke

Fluke 80K-6 Manual de usuario

Fluke

Fluke 189II/AN Manual de usuario

Fluke

Fluke Nuclear Associates 76-907 Manual de usuario

Fluke

Fluke 80i-110s Manual de usuario

Fluke

Fluke 971 CAL Manual de usuario

Fluke

Fluke Comark Diligence 600 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario