FLIR Extech HDV-TX2 Manual de usuario

Product sheet



Model HDV-TX2

Articulating Semi-Rigid Probe

For use with the HDV600 Borescope only

Thank you for purchasing this professional camera probe. This sheet covers the warning and

specifications for the probe only. Instructions regarding the usage of the HDV600 Borescope are

provided in the Borescope User Guide.

Note: The camera LEDs become warm when set to maximum intensity

CAUTION: For the Articulating Probe, do not operate the articulation knob with the

probe in a coiled configuration. This will damage the articulation controls!

CAUTION: Always return the articulation and tension knobs to the neutral position

before removing the probe from the inspection area.

The label on the probe provides the Serial Number and Part Number in the format

shown below. Please do not remove this label; otherwise the warranty will be invalid.

Part No.TX1 F/M/R (flex/macro/rigid) Serial No: HDV110001

Warnings

•Do not bend to a smaller diameter than 10cm (4”)

•Warranty is invalid if stickers, tags, or labels are removed

Articulating Probe Description

1. Articulation knob

2. Articulation tension knob

3. Articulating camera

4. Extension cable sockets

12 3

4

Articulation Setup and Orientation

The articulation direction and orientation may change if the probe is twisted and coiled during use or

when stored. To re-orient the probe:

1. Place the extended probe on a flat surface

2. Set the tension “F” knob to the left or released position.

3. Set the articulation knob to the center position with the R Δand ΔL labels

in the horizontal position.

4. Manually adjust the probe and camera to the zero degree position.

5. Rotate the articulation knob clockwise for a 90° bend.

6. If necessary, manually adjust the probe so that the camera lays flat on the

surface with a 90° articulation

7. Rotate the articulation knob counter-clockwise and confirm proper

orientation.

Specifications

Resolution 640 x 480 pixels

Length 2m (6.5’)

Outer diameter (O.D.) 6mm (0.02”)

Focus distance 2 to 6cm (0.79 to 2.36”)

Housing Stainless Steel

Field of View 60°

Number of LEDs 4

Lamp Output 3500 Lux at 20mm

Operating Temperature -20 to 70°C (-4 to 158°F)

Storage Temperature -20 to 70°C (-4 to 158°F)

Warranty 1 year

Copyright ©2011 Extech Instruments Corporation (a FLIR company)

All rights reserved including the right of reproduction in whole or in part in any form.

www.extech.com

Revision 2.2 2/12

RΔ ΔL

Tabla de contenidos

Otros manuales de Instrumento de medición de FLIR

FLIR

FLIR Extech EX612 Manual de usuario

FLIR

FLIR Extech Instruments PQ34-2 Manual de usuario

FLIR

FLIR CM55 Manual de usuario

FLIR

FLIR CM94 Manual de usuario

FLIR

FLIR Extech Instruments EN300 Manual de usuario

FLIR

FLIR EXTECH HDV-WTX2 Manual de usuario

FLIR

FLIR MR55 Manual de usuario

FLIR

FLIR MR55 Manual de usuario

FLIR

FLIR Extech 407760 Manual de usuario

FLIR

FLIR CM85 Manual de usuario

FLIR

FLIR MR59 Manual del operador

FLIR

FLIR VS80A2-45-1RM Manual de usuario

FLIR

FLIR Imaging Moisture Meter Plus IGM MR176 Manual de usuario

FLIR

FLIR EXTECH RH520 Manual de usuario

FLIR

FLIR DM284 Manual de usuario

FLIR

FLIR Extech Instruments Oyster-10 Manual de usuario

FLIR

FLIR MR59 Manual de usuario

FLIR

FLIR EXTECH INSTRUMENTS PQ34-12 Manual de usuario

FLIR

FLIR EXTECH INSTRUMENTS PQ3450 Manual de usuario

FLIR

FLIR Extech 380926 Manual de usuario

FLIR

FLIR VS80C10-25RM Manual de usuario

FLIR

FLIR CM174 Manual de usuario

FLIR

FLIR CM55 Manual de usuario

FLIR

FLIR EM54 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario