FDS FD171CV VER HDSDI Manual de usuario

Document Number:

MAN –FD171CV VER (XXXXX)

Rev:

Revision Date:

01/12/2017

Page 1 of 20

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

Installation and Operation Manual

FD171CV VER HDSDI

FD171CV VER HDSDI-DVI

FD171CV VER HDSDI-PM

17.1” High-Definition Widescreen LCD

Document Number:

MAN –FD171CV VER (XXXXX)

Rev:

Revision Date:

01/12/2017

Page 2 of 20

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

Table of Contents

General Information.................................................................................................................3

Front View..................................................................................................................................3

Additional Information ...........................................................................................................3

Specifications.............................................................................................................................4

Installation Instructions ..........................................................................................................5

Rear Connector Orientation....................................................................................................5

Mounting Against the Bulkhead or on a Bracket ...............................................................5

Power...........................................................................................................................................6

Wiring Suggestions ..................................................................................................................6

S-Video/Composite and Audio Wiring ................................................................................7

VGA Wiring ...............................................................................................................................8

Power and Ground Wiring......................................................................................................9

Power/Video....................................................................................................................... 10-12

Operation Instructions...........................................................................................................13

Button Controls .......................................................................................................................14

Remote Control Buttons ........................................................................................................15

Technical Drawing 1...............................................................................................................16

Technical Drawing 2...............................................................................................................17

Technical Support...................................................................................................................18

Instructions for Continued Airworthiness ........................................................................18

Warranty ...................................................................................................................................19

Log of Revisions......................................................................................................................20

Document Number:

MAN –FD171CV VER (XXXXX)

Rev:

Revision Date:

01/12/2017

Page 3 of 20

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

General Information

The FD171CV VER HDSDI, FD171CV VER HDSDI-DVI, AND FD171CV VER HDSDI-PM

are 17.1” High-Definition Widescreen LCDs which have features that allow installation in

the smallest of mounting areas with the minimum of interface equipment. Built with retrofit

aircraft integration in mind, this display can switch between four video input sources using

an infrared remote.

Front View

Additional Information

The FD171CV VER HDSDI, FD171CV VER HDSDI-DVI and FD171CV VER HDSDI-PM

utilize a state of the art digital video decoding chipset for the analog video input. There are

FOUR video source inputs available. They are in order of picture quality: (1)HDSDI, (1)

VGA, (1) S-Video, and (1) Composite Video. In addition, the FD171CV VER HDSDI-DVI

has (1) DVI Input. The FD171CV VER HDSDI and the FD171CV VER HDSDI-PM have (1)

HDSDI Loop Through Driver Output.

The FD171CV VER HDSDI, FD171CV VER-HDSDI-DVI and the FD171CV-HDSDI-PM can

also be connected to existing video switchers and use only a composite video input from a

selector interface box. In this case, the IR remote will only be used to set up the screen

after installation. e.g. adjust brightness, contrast, etc.

The LCD is protected with a .060” Lexan lens. The purpose of this lens is to prevent

scratching of the LCD and reduce glare. The FD171CV VER HDSDI, FD171CV VER

HDSDI-DVI and FD171CV VER HDSDI-PM are made of all metal components.

The FD171CV VER HDSDI-PM has firmware that presents side-by-side picture in picture

images in 16:9 aspect ratio.

Document Number:

MAN –FD171CV VER (XXXXX)

Rev:

Revision Date:

01/12/2017

Page 4 of 20

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

Specifications

Display Type

17.1” TFT Color LCD

Display Color

16.7 Million Colors

Native Resolution

1440 x 900

Video Sources

(1) HD-SDI, (1) VGA, (1) S-Video, (1) Composite.

* FD171CV VER HDSDI-DVI only (1) DVI-D

** FD171CV VER HDSDI &

FD171CV VER HDSDI-PM only (1) HD-SDI Loop-Through Driver Out

Supported Video Input

(Composite and

S-Video)

NTSC

(525/59.94i)

PAL

(625/50i)

Supported Input

Resolutions

(VGA and DVI)

VGA –WUXGA (640x480 –1920x1200) @ 60 Hz

Supported Input

Resolutions

(SD-SDI and HD-SDI)

SMPTE-274

1080i(60/59.94/50)

1080P(30/29.97/25/24/24sF/23.98/23.98sF)

SMPTE-296M

720P(50/59.94/60)

SMPTE-125M

480i(59.94)

ITU-R.BT.656

576i(50)

2K Format

2048 x 1080(23.98psf/24psf/23.98p/24p)

Aspect Ratio

16:10

Brightness

250 cd/m2

Dimensions

16.25”(W) x 11.00” (H) x 1.75”(D)

Display Size

14.36”(W) x 8.950”(H)

Weight

7.30 Lb.

Power @ Amp

28V DC @ 1.3A Max. Cont. Steady-State

Screen Control

On Screen Display Menu

Materials

Aluminum

Pixel Pitch

.255 mm X .255 mm

Operating

Temperature

0-50° C (32-122° F)

Test Certifications

N/A

Document Number:

MAN –FD171CV VER (XXXXX)

Rev:

Revision Date:

01/12/2017

Page 5 of 20

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

Installation Instructions

All cabin entertainment equipment, such as the FD171CV VER HDSDI, FD171CV VER

HDSDI-DVI and FD171CV VER HDSDI-PM should be installed on a non-essential bus and

have a dedicated circuit breaker.

There are eight 8-32 UNC mounting holes located on the sides and back of the display.

Four holes are located at the four corners of the back and four holes are located two on

each side of the bezel. It is sufficient to mount the display by four attach points.

Mounting against the bulkhead or on a bracket: The unit can be mounted internal,

external, or partially internal to the bulkhead. It is recommended that you leave about ¼

inch of space around the rear, top and bottom of the display for the exhaust fan to have

circulating air. When mounting from inside the bulkhead it is possible to have only the LCD

visible to the cabin. The unit will come on automatically upon power application and if using

an external video source selection box the IR is not needed. If you are using the IR to

change the video source selection then you need to have the IR LED visible to the cabin.

Rear Connector Orientation –The rear connector of this monitor can be mounted

horizontally (connector perpendicular to rear of monitor) or vertically (connector

perpendicular to bottom of monitor) in order to give you the most convenient mounting

options. By default, this monitor's connector ships in the rear/horizontal position. FDS

Avionics Corp. will ship the unit with the optional bottom/vertical mounting connector

configuration if specified at the time of order; contact your local sales representative for

assistance. It is possible to change the connector orientation at the time of installation.

For instructions on how to change the connector orientation please call FDS Avionics Corp.

at +1 (470) 239-7421 and ask for Technical Support.

Document Number:

MAN –FD171CV VER (XXXXX)

Rev:

Revision Date:

01/12/2017

Page 6 of 20

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

Power This is a 28VDC monitor that requires 1.3 Amps of power to operate. The unit turns on

automatically upon power application.

Wiring Suggestions

All shields should be grounded to the connector at the source, and floating at the display.

Avoid routing video wiring parallel to:

AC wiring

Strobe wiring

DC motor supply cables

Inverter cabling

Or any other potential noise source.

Document Number:

MAN –FD171CV VER (XXXXX)

Rev:

Revision Date:

01/12/2017

Page 7 of 20

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

S-Video/Composite and Audio Wiring

Recommended cable for s-video/composite and audio purposes is PIC 75 Ohm Coax, P/N

V76261. This is a lightweight, flexible, and low signal loss cable which meets FAA

flammability requirements of FAR 23.1359(d), FAR 25.853(a) and FAR 25.869(a)(4).

Similar aviation coaxial cable can be used from other vendors, as well. Some aircraft are

prone to AC noise - we recommend adding to the composite source a 75Ohm video

isolation transformer such as Deerfield Laboratory, Inc. Part No. 162-1

(www.deerfieldlab.com, (650) 632-4090). In most cases this should be added to the video

output of the source.

Document Number:

MAN –FD171CV VER (XXXXX)

Rev:

Revision Date:

01/12/2017

Page 8 of 20

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

VGA Wiring

Recommended cable for VGA purpose is ECS P/N 453005. This is a single shielded cable

containing 5 separate coaxial cables, color-coded to match the functions of the wires.

Coax cables should be terminated using solder sleeve coaxial cable terminators, Raychem

P/N: CWT-4174-W122-5/9

Document Number:

MAN –FD171CV VER (XXXXX)

Rev:

Revision Date:

01/12/2017

Page 9 of 20

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

Power and Ground Wiring

This is a 28VDC monitor that requires 1.3 amps of power to operate. To operate properly

this monitor requires an input voltage of 18-28VDC.

The rated current of the equipment and associated voltage drop should be taken into

consideration when selecting wire gauge. The following example is based on an install

with a 28VDC power system and a total of 50 feet of wire between the circuit breaker,

monitor and ground.

Example: 22awg wire has 16.2 Ohms per 1000 feet, this equates to .81 Ohms for 50 feet.

1.3 Amps of current on .81 Ohms will drop 1.05 Volts.

Resistance of Wire Type M22759/16-**

(** = Gauge)

Gauge (AWG)

OHMS/1000’

26.20

16.20

9.88

4.81

2.02

1.26

.701

Also, use short heavy gauge wire and a clean tight connection for ground.

It is the installer's responsibility to understand the product's requirements to install the

product in compliance with industry standards and safety.

Document Number:

MAN –FD171CV VER (XXXXX)

Rev:

Revision Date:

01/12/2017

Page 10 of 20

TECHNICAL SUPPORT

470-239-7421 or FDSAvionics.com

Power/Video

P1 (Power/Video)

High Density DB-15 Receptacle (supplied)

Connector P/N: M24308/2-286 or Equivalent

Crimp Contacts P/N: M39029/57-354 or Equivalent

Number

Description

28VDC Power

28VDC Ground

Composite Video 1 - Signal

Composite Video 1 - Shield

S-Video Y Signal

S-Video Y Shield

S-Video C Signal

S-Video C Shield

Red Video (Pin 1 on Standard VGA)

Green Video (Pin 2 on Standard VGA)

Blue Video (Pin 3 on Standard VGA)

Video Ground

Sync Ground

Horizontal Sync (Pin 13 on Standard VGA)

Vertical Sync (Pin 14 on Standard VGA)

Otros manuales para FD171CV VER HDSDI

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Monitor de FDS

FDS

FDS FD171CV VER HDSDI Manual de usuario

FDS

FDS FD201CV-C-1 Manual de usuario

FDS

FDS FD171CV-C-1 Manual de usuario

FDS

FDS FD090CV Manual de usuario

FDS

FDS FD102CV-C-1 Manual de usuario

FDS

FDS FD101DD-BH Manual de usuario

FDS

FDS FD215CV-C-5 Manual de usuario

FDS

FDS FDPMAID Series Manual de usuario

FDS

FDS FD151CV-C-HT Manual de usuario

FDS

FDS FD141CV-C-6 Manual de usuario

FDS

FDS FD220CV-C-1 Manual de usuario

FDS

FDS FD141CV-C-3 Manual de usuario

FDS

FDS FD320CV Manual de usuario

FDS

FDS FD102CMT Manual de usuario

FDS

FDS FD70ARM Manual de usuario

FDS

FDS FD141CV-C-1 Manual de usuario

FDS

FDS FD151CMT Manual de usuario

FDS

FDS FD102CV-C-7-L Manual de usuario

FDS

FDS FD70CV-M-C-6 Manual de usuario

FDS

FDS FD102CV-LP-S Manual de usuario

FDS

FDS FD70CMT-M Manual de usuario

FDS

FDS FD171CV-C-4 Manual de usuario

FDS

FDS FD50HMT Manual de usuario

FDS

FDS FD215CV-C-7 Manual de usuario

Manuales populares de Monitor de otras marcas

Linear Acoustic

Linear Acoustic LQ-1000 Manual de usuario

AOC

AOC I2579V Manual de usuario

Gateway

Gateway FPD1520 Manual de usuario

Furuno

Furuno Mu 120c Manual de usuario

Asus

Asus VB171D - 17" LCD Monitor Manual de usuario

Dell

Dell S2230MX Instrucciones de uso

Philips

Philips 107C64 Manual de usuario

Dell

Dell S2409WFP Manual de usuario

EverFocus

EverFocus EN-7517E Manual de usuario

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manual de usuario

Dell

Dell Precision 7680 Manual de instrucciones

LG 50PM1M - - 50" Plasma Panel Manual de usuario

Bosch

Bosch DDU 9 Manual de usuario

Acer

Acer A231HL Manual de usuario

Philips

Philips 86BDL4152T Manual de usuario

NEC

NEC AccuSync LCD5V Manual de usuario

Emay

Emay SleepO2 Manual de usuario

IBM

IBM 6360 Instrucciones de instalación