F&F BIS-411-LED Manual de usuario
- 1 -
BIS-411-LED
Bistable relay
F&F Filipowski sp. j.
Konstantynowska 79/81, 95-200 Pabianice, POLAND
phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71
www.fif.com.pl; e-mail: biuro@fif.com.pl
Do not dispose of this device in the trash along with other waste!
According to the Law on Waste, electro coming from households free of charge and can
give any amount to up to that end point of collec� on, as well as to store the occasion of
the purchase of new equipment (in accordance with the principle of old-for-new, regard-
less of brand). Electro thrown in the trash or abandoned in nature, pose a threat to the
environment and human health.
Electronic bistable pulse relay BIS-411-LED allows switching on
or off the lighting or other device from several different points
by parallel connected, momentary (bell) control switches.
The receiver is switched on after a current pulse caused by pres-
sing any momentary (bell) button connected to the relay. After
the next pulse, the receiver will be switched off.
The relay does not have a „memory” of the contact position,
which means in the event of a power failure and its subsequ-
ent return, the relay contact will be set to „off”. This prevents
the controlled receivers from being switched on automatically
without supervision after a prolonged power failure.
Purpose
Functioning
- 2 -
The "LED" version of the relay is equipped with a contact
designed to cooperate with receivers with high starting
current, such as: LED fluorescent lamps, ESL fluorescent
lamps, electronic transformers, discharge lamps, etc.
1.Disconnect the power supply.
2.Fix the relay on a rail in the control box.
3.Connect the power wires to terminals 1-3 according to the se-
lected relay control option (control pulse L or N).
4.Momentary switches connected in parallel connect to terminal
6 and the wire, to which terminal 3 is connected.
5.Powered receiver connect in series to terminals 11-12.
The maximum total backlight current of all connected
buttons must not exceed 5 mA.
BIS-411B-LED can work with backlit buttons.
Mounting
- 3 -
1-3 relay power supply 165÷265 V AC
6 control input
11-12 NO contact (active)
Wiring diagram
- 4 -
1-3 relay power supply 165÷265 V AC
6 control input
11-12 NO contact (active)
- 5 -
power supply 165÷265 V AC
contact separated 1×NO
maximum load current (AC-1) 16 A (120 A/20 ms)
control pulse current 5 mA
activation delay 0.1÷0.2 s
power indication green LED
signalling activation red LED
power consumption
standby 0.15 W
on 0.6 W
terminal 2.5 mm² screw terminals
tightening torque 0.4 Nm
working temperature -25÷50°C
dimensions 1 module (18 mm)
mounting on TH-35 rail
ingress protection IP20
tungsten halogen fluorescent energy-saving LED
2000 W 1250 W 1000 W 500 W 250 W
The above data are indicative and will heavily depend on the
design of a specific receiver (that is especially important for
LED bulbs, energy-saving lamps, electronic transformers and
pulse power supply units), switching frequency and operating
conditions.
For more information visit: www.fif.com.pl.
Technical data
Power table
- 6 -
The F&F products are covered by a warranty of the 24 months
from the date of purchase. Effective only with proof of purchase.
Contact your dealer or directly with us.
F&F Filipowski sp. j. declares that the device is in conformity
with the essential requirements of The Low Voltage Directive
(LVD) 2014/35/EU and the Electromagnetic Compatibility (EMC)
Directive 2014/30/UE.
The CE Declaration of Conformity, along with the references to
the standards in relation to which conformity is declared, can be
found at www.fif.com.pl on the product page.
Warranty
CE declaration
E200409
Tabla de contenidos
Otros manuales de Relé de F&F
F&F
F&F BIS-411i Manual de usuario
F&F
F&F BIS-411 Manual de usuario
F&F
F&F PCS-516UNI Manual de usuario
F&F
F&F PP-2Z Manual de usuario
F&F
F&F BIS-411 1R1Z Manual de usuario
F&F
F&F PCR-513 Manual de usuario
F&F
F&F FW-R1P Manual de usuario
F&F
F&F MST-03 Manual de usuario
F&F
F&F PK-2P Manual de usuario
F&F
F&F PK-1P Manual de usuario
F&F
F&F PK-2Z-LED 24 V Manual de usuario
F&F
F&F PCS-506 Manual de usuario
F&F
F&F BIS-419-LED Manual de usuario
F&F
F&F PP-1P Pico Manual de usuario
F&F
F&F FW-R2P Manual de usuario
F&F
F&F SWITCH & ENERGY Wi-R1S1-P Manual de usuario
F&F
F&F 5908312595649 Manual de usuario
F&F
F&F BIS-413M Manual de usuario
F&F
F&F BIS-410 Manual de usuario
F&F
F&F BIS-412M 24V Manual de usuario
