Extron electronics StudioStation 100 Manual de usuario

IMPORTANT:

Go to www.extron.com for the

complete user guide

, installation

instructions, and specifications.

12A MAX

POWER OUTPUT 12A MAX

LAN

RX +5V

INPUT IR

COM

100-120VAC 50/60Hz

IN SG

LISTED 17TT

AUDIO/VIDEO

APARATUS

IPL T PC1

100

INPUT

LINK

ACT

POWER

10A MAX

POWER OUTPUT 10A MAX

LAN

RX +5V

INPUT IR

COM

200-240V ~50/60Hz

IN SG

LISTED 17TT

AUDIO/VIDEO

APARATUS

IPL T PC1

100

INPUT

LINK

ACT

POWER

SMP 111

STREAMING MEDIA PROCESSOR

INPUT OUT

HDCP

HDMI

HDMILINE HDMI

CLIP

AUDIO

CONFIG

USB STORAGE

ALARM

MARK

RxTx G

RS-232 CONTROL

RESET

+12V

1.0A MAX

INPUTS OUTPUT REMOTE

SMP 111

100-240V 0.7A

50-60 Hz LAN

USB STORAGE

HDMI HDMI

AUDIO

LINE R

USB STORAGE

MARK

RECORD

Extron

StudioStation 100

Streaming Media

Processor

Extron

SMB 212

Two-gang Surface

Mount Box

Extron

RCP 101 EU

Remote Control

Panel

Extron

IPL T PC1

IP Link AC Power and

Device Controller

Extron

IPL T PC1i

IP Link AC Power and

Device Controller

USB Drive

Wireless Microphone System

(not included)

Audio

USB Power

Power

Crossover

HDMI

Camera & Lights

(not included)

POWERSTANDBYPOWER

TANDB

7 8

910

Extron

StudioStation • Installation Guide

The Extron StudioStationis an easy-to-use single button recording system, which allows users to create recordings with the

touch of a button. The system integrates the StudioStation100 Streaming Media Processor, a high denition recording and

streaming device, the RCP101 EU for remote recording controls, the IPL T PC1 for remote AC power, and the SMB 212 to

surface mount the RCP101 EU. The StudioStation100 records MP4, M4V and M4A les of full screen HDMI video channel with

mixed audio, and metadata. The StudioStationis ideal for installation beneath conference tables and in lecterns.

The StudioStation turns the power output of the IPL T PC1 (or optional IPL T PCS4) on and off when it is triggered by thumb drive

detection on the RCP101 EU. When the user inserts a properly formatted USB drive into the RCP101 EU, the AC power port

of the IPL T PC1 turns on to power up all the attached recording equipment such as the camera, studio lights, and microphone.

Conversely, when the USB thumb drive is removed from the RCP101 EU, the AC power port of the IPL T PC1 automatically

powers OFF the equipment.

Items included in StudioStation are:

• 1 StudioStation100 • 1 RCP101 EU • 1 Flex55 102 • (1) 15’ (4.5 m) USB Mini-B to USB type A cable

• 1 IPL T PC1 • 1 SMB 212 • 1 Blank plate • (1) 6’ (1.8 m) RJ-45 network crossover cable

NOTES:

• Throughout this guide, the IPL T PC1 refers to either the IPL T PC1 or IPL T PC1i.

• For full device conguration and operation details, see the StudioStation User Guide at www.extron.com or

StudioStation Help File.

Installation Diagram

Figure 1. Typical StudioStation Application

StudioStation • Setup Guide (Continued)

BB C

Installation

To install the StudioStation devices (see ﬁgure 1 on the previous page):

1Decide where you would like the RCP101 EU controller located and mount the SMB 212 in that location (see the

SMB 200 Setup Guide provided with the SMB 212).

2Install the RCP101 EU controller into the SMB 212 using the Flex55 Mounting Kit (see gure 2).

a. Install Flex 55 2-gang frame into the SMB 212 (see gure 2, 1and 2).

b. Snap the RCP 101 EU into the Flex55 2-gang mounting frame (see gure 2, 3).

c. Snap the blank plate into the empty slot of the 2-gang Flex55 2-gang frame.

SMB 212

Mounting

Bracket

Mounting

Frame

Flex 55 100

Mounting Kit

ount

rac

Secure the mounting

bracket to the box using

the provided M3 screws.

Position the mounting frame

on the mounting bracket.

Connect cables to the

RCP 101 EU and snap

into the mounting bracket.

RCP 101 EU

Blank Plate

USB STORAGE

MARK

Extron

RECORD

Figure 2. Flex55 Module Installation Diagram

3Connect the HDMI cable from the camera (not included) into the HDMI input on the StudioStation100.

4Connect the 3.5 mm 5-pole captive screw connector from the audio system (not included) into the Audio Input on the

StudioStation100.

5Connect the RCP101 EU to the StudioStation100 using the provided 15 foot (4.5 meter) USB

Mini-B to USB type A cable.

a. Insert the USB Mini-B connector into the USB port on the RCP101 EU rear panel (see the

image on the right, C).

b. Use a zip tie to secure the USB cable to the anchor (A).

c. Connect the other end of the cable to the Control USB port on the rear panel of the

StudioStation100 (see ﬁgure 1, 5 on the previous page).

To increase the distance up to 300 feet (100 m), use an Extron Extender Plus Series twisted pair extender

6The RCP101 EU can be powered with a 12 VDC, 1.0 A power supply or by connecting it to the StudioStation100.

• To power the unit with a power supply, connect the provided power supply to the 12V power inlet (see the image above,

B). Ensure that the polarity of the wires is correct (figure 3) and the wires are stripped correctly.

• To power the unit with the StudioStation100, use the provided cable to connect the 12V power inlet of the RCP 101 EU

to the 2-pole 12V power outlet on the rear panel of the StudioStation100 (see figure 1, 6on the previous page).

Power Receptacle

DC Power Cord

+12 VDC Input

SECTION A–A

Ridges

Smooth

Power Supply

Output Cord

3/16"

(5 mm) Max.

POWER

1.0 A MA

12V

Return

Ground

all devices.

1AMAX

100-240V 50-60Hz

External

Power Supply

(12 VDC, 1 A max.,

Extron P/N 28-071-57LF)

Figure 3. Connecting Power to the RCP101 EU

ATTENTION:

• Do not connect any external power supplies until you have read the Attention notications in the Power Supply

section of the user guide for that device.

• Ne branchez pas de sources d’alimentation externes avant d’avoir lu les mises en garde dans la section

«PowerSupply» du guide utilisateur pour cet appareil.

7Connect the StudioStation100 LAN port to the IPL T PC1 LAN port (see ﬁgure 1 on page 1) using the included NETXC

M-M 6 foot (1.8 meter) RJ-45 network crossover cable to enable the IPL T PC1 to power on and off the connected recording

equipment such as the camera, studio lights, and microphone, when a USB drive is inserted into the RCP101 EU USB port.

• If the crossover cable is used, no further conguration is required.

• If a straight-through cable is used and the StudioStation and PC1 are connected through a network, follow these

conguration steps:

a. Congure the IP address of the IPL T PC1 via the embedded web page.

• If you do not know the IP address, use the IP Link Device Manger to discover it.

• The default IP address of the IPL is 192.168.254.254.

b. Assign an Admin password to the IPL T PC1 (optional).

c. From the StudioStation100 Web UI, on the StudioStation page, enter the IP address and the Admin password

(if required) of the IPL T PC1 and test the connection (see gure 4).

• In order to enter the Web UI of the StudioStation 100, you need the IP address of the StudioStation 100.

• The default IP address of the StudioStation 100 is 192.168.254.253

Figure 4. Test Connection on the StudioStation Page

8Connect the IEC power cable from the lights into the IEC Power outlet of the IPL T PC1 to automatically power the lights on

and off when a USB drive is inserted into the USB port on the RCP101 EU.

9Connect an optional HDMI display into the HDMI output to preview the recording.

¢Connect the provided IEC cables:

a. Into the IPLTPC1 and a power source.

b. Into the StudioStation100 and a power source.

c. Verify the front panel buttons and LCDs illuminate.

£Insert a USB drive into the USB port on the RCP101 EU.

a. The StudioStation100 detects the USB drive inserted into the RCP101 EU and sends a command to the IPLTPC1 to

turn on the power outlet.

NOTE: By default, the StudioStation100 records to the RCP101 EU USB drive.

b. The IPL T PC1 powers ON the attached recording devices.

NOTE: When the USB drive is removed from the RCP101 EU, the Studio Station 100 sends a command to turn OFF the

IPLTPC1 power output. All attached recording devices are powered OFF.

¤Configure the StudioStation 100 (optional). Configuration is only available when connected through a network.

a. Congure the metadata on the Metadata page (see gure 5) in the StudioStation100 Web UI.

Figure 5. Conﬁgure Metadata on the Encoding & Metadata Page

68-3134-51 Rev. B

09 17

Extron Headquarters

+800.633.9876 Inside USA/Canada Only

Extron USA - West Extron USA - East

+1.714.491.1500 +1.919.850.1000

+1.714.491.1517 FAX +1.919.850.1001 FAX

Extron Europe

+800.3987.6673

Inside Europe Only

+31.33.453.4040

+31.33.453.4050 FAX

Extron Asia

+65.6383.4400

+65.6383.4664 FAX

Extron Japan

+81.3.3511.7655

+81.3.3511.7656 FAX

Extron China

+86.21.3760.1568

+86.21.3760.1566 FAX

Extron Middle East

+971.4.299.1800

+971.4.299.1880 FAX

Extron Australia

+61.8.8113.6800

+61.8.8351.2511 FAX

Extron India

1800.3070.3777

(Inside India Only)

+91.80.3055.3777

+91.80.3055.3737 FAX

b. Congure the recording resolution in the Recording panel on the Encoding page (see gure 6) in the

StudioStation100 Web UI.

Figure 6. Conﬁgure Recording Resolution on the Encoding Page

c. Optionally, congure the le publish destination in the Publishing Destination Configuration panel on the

Publish Settings page (see gure 7) in the StudioStation100 Web UI.

NOTE: If you connected the StudioStation100 LAN port to the IPL T PC1 LAN port with the crossover cable, in 7

on the previous page, you cannot configure the file publish destination.

Figure 7. Publishing Destination Conﬁguration Panel on the Publish Settings Page

Making a Recording

The StudioStation100 and RCP101 EU are ready to record. Follow these instructions to

make a recording using the RCP101 EU (see the image on the right):

1. Insert a USB drive into the USB port (E) on the RCP101 EU.

2. Use the RCP101 EU to start a recording by pressing the Record button (A).

3. Press the Mark button (D) to add a chapter marking (optional).

4. Pause the recording by pressing the Pause button (C).

5. Restart the recording by pressing the Pause button (C) a second time or by pressing

the Record button (A).

6. End the recording by pressing the Stop button (B).

MARK

RECORD

USB STORAGE

Extron

Default Recording Setting

Recording Files: Video File

Default Preset: 720p High

Audio Bitrate: 192 Kbps

Audio Output: Mixed

Audio Delay: 0 ms

Resolution: 1280x720

Frame rate: 30 fps

GOP Length: 30

Video bit rate: 5000

Rate Control: VBR

H.264 Prole: High

Prole Level: 3.1

Otros manuales para StudioStation 100

Tabla de contenidos

Otros manuales de Equipo de grabación de Extron electronics

Extron electronics

Extron electronics DVI-RGB 150 Manual de usuario

Extron electronics

Extron electronics Interfaces RGB 500 Series Manual de usuario

Extron electronics

Extron electronics KNX 100G Manual de usuario

Extron electronics

Extron electronics TLI Pro 101 Manual de usuario

Extron electronics

Extron electronics RGB 400xi Series Manual de usuario

Extron electronics

Extron electronics RGB 124 Manual de usuario

Extron electronics

Extron electronics TLI Pro 101 Manual de usuario

Extron electronics

Extron electronics SSP 7.1 Manual de usuario

Extron electronics

Extron electronics IP Link IPL T CR48 Manual de usuario

Extron electronics

Extron electronics 12G HD-SDI 101 Manual de usuario

Extron electronics

Extron electronics CIA111 Manual de usuario

Extron electronics

Extron electronics AXI 02 AT Manual de usuario

Extron electronics

Extron electronics RGB 304 Manual de usuario

Extron electronics

Extron electronics Architectural Interface RGB 440 Manual de usuario

Extron electronics

Extron electronics HAI 100 4K Manual

Extron electronics

Extron electronics IP Link Pro xi IPL EXP I/O Series Manual de usuario

Extron electronics

Extron electronics RGB 560 AKM Manual de usuario

Extron electronics

Extron electronics Architectural Series Universal Interfaces with Audio and ADSP RGB... Manual de usuario

Extron electronics

Extron electronics CCI Pro 700 Manual de usuario

Extron electronics

Extron electronics RGB 580x Manual de usuario

Extron electronics

Extron electronics RGB 190F Manual de usuario

Extron electronics

Extron electronics IP LINK IPL T SFI244 Manual de usuario

Extron electronics

Extron electronics RGB 302 Manual de usuario

Extron electronics

Extron electronics RGB 160xi Manual de usuario

Manuales populares de Equipo de grabación de otras marcas

KV2 Audio

KV2 Audio 500 Series Manual de usuario

Robotics Technologies

Robotics Technologies microBus-Cam II Manual de usuario

Seca

Seca 460 Manual de usuario

Cognex

Cognex MVS-8000 Series Manual de usuario

Mect

Mect MPNC006 Series Manual de usuario

Bad Caf

Bad Caf THE LEASH Manual de usuario

Strymon

Strymon NIGHTSKY Manual de usuario

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manual de usuario

Tews Technologies

Tews Technologies TPMC465 Manual de usuario

Honeywell

Honeywell Excel 50 Manual de usuario

SeaLevel

SeaLevel COMM+8.LPCI Manual de usuario

Arturia

Arturia AUDIOFUSE STUDIO Manual de usuario

Rukra

Rukra RK-1240 Manual de usuario

Samson

Samson SCOM Manual de usuario

Dynacord

Dynacord DPS260 Manual de usuario

Nice

Nice Core Manual de usuario

Pyle Pro

Pyle Pro PSS8 Manual de usuario

RF-System

RF-System TinyGate Manual de uso y cuidado