Extreme Networks IdentiFi 3600 Manual de usuario
AP3610 Indoor Access Point – Data Sheet 1
Product Overview
The AP3600 series was the first 802.11abgn indoor access point in the industry to
support 3x3 MIMO 11n performance using existing 802.3af power investments. This
access point is designed to operate in enterprise environments that require always-
on connectivity. The AP3600 Series is equally adept at serving high-bandwidth
video applications as well as low-latency voice applications. The AP3610 comes
with an integrated six antenna array for ease of installation.
The AP3600 platform supports dynamic radio management, spectrum analysis,
self-forming and self-healing meshing, security, role-based authentication,
authorization, and access control. The 3x3:2 platform is capable of delivering
600Mbps over-the-air-performance and up to 50,000 packets per second on the
wire port.
DATA SHEET
IdentiFi 3600 Indoor
Access Point
Fully Featured, Enterprise-Grade Wi-Fi
AP3610 Indoor Access Point – Data Sheet 2
PRODUCT FEATURES AP3610
GENERAL
High performance enterprise class AP √
Number of radios 2
MIMO implementation for high performance 11n throughputs 3x3
Number of spatial streams 2
Maximum Throughput Per Radio / Total 300Mbps/600Mbps
Wired performance in packets per second (pps) 50,000 pps
Number of SSIDs supported per radio / total 8/16
Simultaneous users per radio / total 127/254
Simultaneous Voice calls (802.11b, G711, R>80) 12
Mode of operation Semi-autonomous
Plug and play operation/Zero touch deployment √
Security and Standards WPA, WPA2 (AES), 802.11i, 802.1x, IPSec, IKEv2, PKCS #10, X509 DER / PKCS
#12
MULTIPLE OPERATING MODES
Clients serving access points √
Intelligent thin AP Encryption, Security, QoS and RF management done on AP
Bridging data trac at AP and/or at controller simultaneously √
Simultaneous RF monitoring and client services √
Multi-channel WIDS Sensor-mode
Multi-channel WIPS Sensor-mode
Remote access point √
RF spectrum analysis Sensor-mode
Self-forming and self-healing meshing √
RADIO CHARACTERISTICS
Max transmit power (Note: maximum transmit power is defined by local regulatory requirement
combined with antenna type)
Radio 1 (5GHz) 22 dBm
Radio 2 (2.4GHz) 23 dBm
Max antenna gain (integrated antenna)
Radio 1 (5GHz) 6 dBi
Radio 2 (2.4GHz) 3 dBi
ADAPTIVE RADIO MANAGEMENT
Dynamic Channel Control 802.11h: DFS & TPC support (ETSI)
Ecient use of the spectrum with a multi-channel architecture √
Automatic transmit power and channel control √
Self-healing with coverage gap detection √
Band steering with multiple steering modes √
Spectrum load balancing of clients √
Airtime fairness √
Performance protection in congested RF environments √
Mitigates co-channel interference with coordinated access √
QOS FOR APPLICATIONS
Quality of Service (WMM, 802.11e) √
Call Admission Control (TSPEC) √
Power Save (U-APSD) √
Fast secure roaming and handover between APs √
Pre-Authentication (Pre-Auth) √
Opportunistic Key Caching (OKC) √
Support voice, video and data using the same SSID √
AP3610 Indoor Access Point – Data Sheet 3
PRODUCT FEATURES AP3610
Prioritize voice over data for both tagged and untagged trac √
Rate limiting (rule and user-based) √
Rule and role based QoS processing √
MULTICAST RATE CONTROL
Multicast to Unicast Conversion √
Adaptable rate multicast √
Power save mode optimization for multicast √
WIRELESS SERVICES
Media Access Protocol CSMA/CA with ACK
Data Rates
802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b: 1, 2, 5.5, 11 Mbps
802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54 Mbps
802.11n: See 802.11n Performance table below
Frequency Bands
802.11a/n:
• 5.15 to 5.25 GHz (FCC / IC / ETSI) – Indoor
• 5.25 to 5.35 GHz (FCC / IC / ETSI) - Indoor / Outdoor
• 5.47 to 5.725 GHz (FCC / IC / ETSI) – Indoor
• 5.725 to 5.850 GHz (FCC / IC) - Indoor / Outdoor
802.11b/g/n:
• 2.400 to 2.4835 GHz (FCC / IC / ETSI) - Indoor / Outdoor
Wireless Modulation
802.11a: OFDM
802.11b: DSSS
802.11g: DSSS and OFDM
802.11n: BPSK, QPSK, 16QAM, 64QAM with OFDM
802.11n High-throughput (HT) support: HT 20/40
802.11n Packet aggregation: A-MPDU, A-MSDU
Receive Sensitivity (typical)
802.11a: 6 Mbps/-93 dBm, 54 Mbps/-80 dBm
802.11n 5 GHz HT20 Mode: 6.5 Mbps(MCS0)/-94 dBm, 130 Mbps(MCS15)/-72
dBm
802.11n 5 GHz HT40 Mode: 15 Mbps(MCS0)/-89 dBm, 300 Mbps(MCS15)/-68
dBm
802.11b: 1 Mbps/-93 dBm, 11 Mbps/-90 dBm
802.11g: 6 Mbps/-92 dBm, 54 Mbps/-81 dBm
802.11n 2.4 GHz HT20 Mode: 6.5 Mbps(MCS0)/-94 dBm, 130 Mbps(MCS15)/-74
dBm
802.11n 2.4 GHz HT40 Mode: 15 Mbps(MCS0)/-88 dBm, 300 Mbps(MCS15)/-69
dBm
INTERFACES
# 10/100/1000 Base T Ethernet autosensing link 1
Console port for the ease of installation and management √
MOUNTING
Wall mounting bracket √
Drop-ceiling mounting bracket Optional
Environmental
Operating:
Temperature 0° C to +50° C (+32° F to +122° F)
Humidity 0%-95% (noncondensing)
Storage:
Temperature -5° C to +50° C (+23° F to +122° F)
Transportation:
Temperature -40° C to +70° C (-40° F to +158° F)
2002/95/EC (RoHS Directive), 2002/96/EC (WEEE Directive),Ministry of
Information Order #39 (China RoHS)
AP3610 Indoor Access Point – Data Sheet 4
PRODUCT FEATURES AP3610
Safety
UL / IEC / EN 60950-1; CAN/CSA 22.2 # 60950-1-03 UL 2043 Plenum Rating
(Indoor Access Points)
European 2006/95/EC
Low Voltage Directive
Compliance
• FCC CFR 47 Part 15.107 and 15.109 Class B (FCC 47 CFR, Part 15.205, 15.207,
15.209, FCC 47 CFR, Part 2.109, 2.1093, FCC OET No. 65)
• ICES-003 Class B
• RSS-210, RSS-102 (RF Exposure)
• R&TTE Directive 1999/5/EC
• EN 301 893
• EN 300 328
• 2004/108/EC EMC Directive
• EN 301 489 -1 & 17
• EN55011/CISPR 11 Class B, Group 1 ISM
• EN55022/CISPR 22 Class B
• EN55024/CISPR 24
• EN / UL 60601-1-2
• EN 50385
MECHANICAL
Dimensions (W x H x L) (8.4” x 2.2” x 7.1”)
Weight 628.4g
Max power consumption 12.8W (Typical 11W)
Warranty Lifetime
Ordering Information
PART NUMBER DESCRIPTION
ACCESS POINTS
WS-AP3610 Dual Radio 802.11a/b/g/n, 3x3:2, indoor access point with six internal antenna
array
ACCESSORIES (OPTIONAL)
WS-MB361020-01 Secure mounting Kit with Kensington lock slot and integrated cable routing for
AP36xx
WS-MB361020-12 Drop ceiling mounting bracket for indoor AP36xx (9/16 or 15/16 rail)
WS-MB361020-21 Drop ceiling rail adjustable bracket for 1/2”, 15/16” and 1 1/2” rails (requires WS-
MB361020-01 to be ordered separately)
WS-MBUNIVERSAL-01 Universal mounting bracket adapter for existing installs (Cisco, Aruba, Trapeze,
RoamAbout) - Refer to manual for specific access point model support
WS-PS361020-MR AP36xx AC Power Supply - Multi-Region (not available in the EU)
WS-PS3X48-MR AP3610 Series AC Power Supply - Multi-Region
MID-SPAN POE DEVICES (OPTIONAL)
PD-3501G-ENT Single port, 1 Gigabit 802.3af PoE Midspan
AP3610 Indoor Access Point – Data Sheet 5
802.11n Performance
DATA RATES (MBPS)
2.4GHZ / 5GHZ
SPATIAL STREAMS HT20 NORMAL GI HT40 NORMAL GI HT40 SHORT GI
MCS0 1 6.5 13.5 15
MCS1 1 13 27 30
MCS2 1 19.5 40.5 45
MCS3 1 26 54 60
MCS4 1 39 81 90
MCS5 1 52 108 120
MCS6 1 58.5 121.5 135
MCS7 1 65 135 150
MCS8 2 13 27 30
MCS9 2 26 54 60
MCS10 2 39 81 120
MCS11 2 52 108 150
MCS12 2 78 162 180
MCS13 2 104 216 240
MCS14 2 117 243 270
MCS15 2 130 270 300
WWW.EXTREMENETWORKS.COM
http://www.ExtremeNetworks.com/contact Phone +1 408 579 2800
©2014 Extreme Networks, Inc. All rights reserved. Extreme Networks and the Extreme Networks logo are trademarks or registered trademarks of Extreme Networks, Inc.
in the United States and/or other countries. All other names are the property of their respective owners. For additional information on Extreme Networks Trademarks
please see http://www.extremenetworks.com/about-extreme/trademarks.aspx. Specifications and product availability are subject to change without notice. 3132-0314
AP3610 Indoor Access Point – Data Sheet 6
Warranty
As a customer-centric company, Extreme Networks is committed
to providing quality products and solutions. In the event that
one of our products fails due to a defect, we have developed a
comprehensive warranty that protects you and provides a simple
way to get your products repaired or media replaced as soon
as possible. For full warranty terms and conditions please go to:
http://www.extremenetworks.com/support/enterasys-support/
how-to/warranty/.
Service & Support
Extreme Networks provides comprehensive service oerings
that range from Professional Services to design, deploy and
optimization of customer networks, customized technical
training, to service and support tailored to individual customer
needs. Please contact your Extreme account executive for more
information about Extreme Service and Support.
Tabla de contenidos
Otros manuales de Punto de acceso inalámbrico de Extreme Networks
Extreme Networks
Extreme Networks Altitude 4000 Series Manual de usuario
Extreme Networks
Extreme Networks ExtremeWireless AP3935i Manual de usuario
Extreme Networks
Extreme Networks ExtremeWireless AP410i Manual de usuario
Extreme Networks
Extreme Networks AP510C Manual de instalación
Extreme Networks
Extreme Networks WiNG AP-7612 Manual de usuario
Extreme Networks
Extreme Networks Extreme Wireless WSAP3825i Manual de usuario
Extreme Networks
Extreme Networks Altitude 350-2 Manual de usuario
Extreme Networks
Extreme Networks ExtremeWireless AP360i ExtremeWireless... Manual de usuario
Extreme Networks
Extreme Networks Altitude 4522 Series Manual de usuario
Extreme Networks
Extreme Networks WS-AP3805-FCC/ROW Manual de usuario
Extreme Networks
Extreme Networks AP-7622 Manual de usuario
Extreme Networks
Extreme Networks AP5050U Manual de usuario
Extreme Networks
Extreme Networks ExtremeWireless WS-AP3915i-FCC Manual de usuario
Extreme Networks
Extreme Networks AP-7522 Manual de usuario
Extreme Networks
Extreme Networks Altitude 350-2d AP Manual de usuario
Extreme Networks
Extreme Networks ExtremeMobility AP410i/e Manual de usuario
Extreme Networks
Extreme Networks Altitude 3550 Guía de referencia rápida
Extreme Networks
Extreme Networks IdentiFi Wireless WS-AP3825i Manual de usuario
Extreme Networks
Extreme Networks ExtremeWireless AP3000X Manual de usuario
Extreme Networks
Extreme Networks Altitude 4600 Series Manual de usuario
