Extech Instruments MO257 Manual de usuario

User's Guide

Pinless Moisture Meter

Model MO257

MO257-EU-EN -V1.2 04/12

Introduction

Congratulations on your purchase of the Extech MO257 Pinless Moisture Meter. The pinless

moisture sensor monitors the moisture in wood and other building materials without causing surface

damage. High frequency sensing technology allows the meter to take non-invasive moisture

measurements. User programmable alarms alert the user if moisture measurements exceed alarm

set-points. This meter is shipped fully tested and calibrated and, with proper use, will provide years of

reliable service.

Meter Description

1. Measurement sensor

2. Power ON-OFF button

3. LCD display

4. Measure (MEAS) button

5. UP and BACKLIGHT button

6. SET button

7. DOWN button

Battery compartment located on rear of unit

LCD Display

1. Low Battery icon

2. Main LCD display

3. MAX reading

4. MIN reading

5. HOLD function

6. Measurement alert

7. MAX mode icon

8. MIN mode icon

MO257-EU-EN -V1.2 04/12

Battery Replacement

1. Turn off the meter

2. Remove the Philips head screw located on the rear of the unit

3. Lift off the rear battery cover

4. Replace the three (3) ‘AAA’ 1.5V batteries

5. Secure the rear battery cover

You, as the end user, are legally bound (EU Battery ordinance) to return all used

batteries, disposal in the household garbage is prohibited! You can hand over your

used batteries / accumulators at collection points in your community or wherever batteries

/ accumulators are sold!

Disposal: Follow the valid legal stipulations in respect of the disposal of the device at the

end of its lifecycle

MO257-EU-EN -V1.2 04/12

Operation

Pinless Moisture Measurements

1. Press the power button to turn the meter on.

2. As described below, you must calibrate the meter before first use.

3. To calibrate, press the MEAS button immediately after powering on the meter. The display will

audibly beep and visually flash the CAL display icon. Keep the measurement sensor at least 3

to 4” (8 to 10 cm) from any object during calibration.

4. When the calibration is complete the beeping and flashing stop. The calibration reading must

not exceed 0.5. If so, re-calibrate ensuring that hands or other objects are kept clear of the

MO257-EU-EN -V1.2 04/12

Auto Power Off

To conserve battery energy, the meter will enter a sleep mode after approx. 30 minutes of inactivity.

Press the power button to wake the meter.

Backlit LCD

Press the up/backlight button to switch the backlighting ON or OFF.

Specifications

ycaruccAegnaRnoitcnuF

Moisture Range 0.0 to 100.0 Relative only

Measurement Depth 20 to 40mm (0.79 to 1.57”)

Display type Backlit LCD

Display digits Three (3) numeric displays; each displaying from 0.0 to 100.0

Display icons HOLD, DRY, RISK, WET, MIN, MAX and low battery icon

Operating Temperature 4 to 43°C (40 to 110°F)

Operating Humidity 90%, 0-30°C (32-86°F), 75%, 30-40°C (86-104°F),

45%, 40-50°C (104-122°F)

Power Supply Three (3) 1.5V ‘AAA’ batteries

Auto Power Off (APO) After 30 minutes of inactivity

Dimensions 235 x 63 x 28mm (9.2 x 2.5 x 1.1”)

Weight 218g (7.7oz)

Moisture Comparison Table (typical)

Material Display units Moisture status

< 30 DRY

30 - 60 RISK

Gypsum

> 60 WET

< 25 DRY

25 - 50 RISK

Cement

> 50 WET

< 50 DRY

50 - 80 RISK

Wood

> 80 WET

HT30-EU-EN-V3.2--9/11

Phone: 01235 838 555

E-mail: cs@airconcern.co.uk

web: www.airconcern.co.uk

Air Concern Ltd, Building 173 Curie Avenue Harwell Didcot, Oxfordshire OX11 0QG

more info for Extech MO257

Tabla de contenidos

Otros manuales de Instrumento de medición de Extech Instruments

Extech Instruments

Extech Instruments EN510 Manual de usuario

Extech Instruments

Extech Instruments 461895 Manual de usuario

Extech Instruments

Extech Instruments MA160 Manual de usuario

Extech Instruments

Extech Instruments MF100 Manual de usuario

Extech Instruments

Extech Instruments LT40 Manual de usuario

Extech Instruments

Extech Instruments SL355 Manual de usuario

Extech Instruments

Extech Instruments 407860 Manual de usuario

Extech Instruments

Extech Instruments PQ2071 Manual de usuario

Extech Instruments

Extech Instruments LT45 Manual de usuario

Extech Instruments

Extech Instruments EA30 Manual de usuario

Extech Instruments

Extech Instruments EX845 Manual de usuario

Extech Instruments

Extech Instruments MultiScope 381270 Manual de usuario

Extech Instruments

Extech Instruments EX820 Manual de usuario

Extech Instruments

Extech Instruments MO55 Manual de usuario

Extech Instruments

Extech Instruments 407445 Manual de usuario

Extech Instruments

Extech Instruments AN320 Manual de usuario

Extech Instruments

Extech Instruments UV510-NIST Manual de usuario

Extech Instruments

Extech Instruments 407026 Manual de usuario

Extech Instruments

Extech Instruments 407703A Manual de usuario

Extech Instruments

Extech Instruments PH90 Manual de usuario

Extech Instruments

Extech Instruments HD450 Manual de usuario

Extech Instruments

Extech Instruments CO15 Manual de usuario

Extech Instruments

Extech Instruments RPM40 Manual de usuario

Extech Instruments

Extech Instruments 382400 Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario