Extech Instruments 380340 Manual de usuario

User's Guide

Heavy Duty Datalogger Module

Model 380340

Introduction

Congratulations on your purchase of Extech’s 380340 Datalogger Module. The

Datalogger connects to and records data from Extech Heavy Duty Series Meters. The

sample rate at which data is recorded is user selectable. Readings stored in the

Datalogger can later be transferred to a PC using the supplied software and

communication cables. This device is shipped fully tested and, with proper use, will

provide years of reliable service.

99 Washington Street

Melrose, MA 02176

Phone 781-665-1400

Toll Free 1-800-517-8431

Visit us at www.TestEquipmentDepot.com

V5.0 5/06

Meter Description

FRONT PANEL VIEW

1. Input / Output terminals

2. LCD Display

3. Buttons

4. Battery compartment (on rear)

5. AC adaptor input

TOP VIEW

1. Optically isolated INPUT jack

2. Optically isolated OUTPUT jack

3. Non-isolated INPUT jack

4. Non-isolated OUTPUT jack

BUTTON DESCRIPTION

1. Power switch

2. Date/Time

3. Function

4. Enter/Clear

5. Sample Rate

6. Pause

123

45 6

1 2 3 4

ISOLATE DIRECT

IN OUT IN OUT

TOP VIEW

REC

OUT

AUTO MANUAL %

V5.0 5/06

Compatible Meters

Model No. Meter Type Display In/Out Port COM Cable

407026 Light Meter Single Direct UPCB-01

407112 Vane Anemometer Dual Direct UPCB-01

407113 Vane Anemometer Dual Direct UPCB-01

407114 CFM Thermo-Anemometer Dual Direct UPCB-01

407117 Mini Vane Thermo-Anemometer Dual Direct UPCB-01

407119 Hot Wire CFM Anemometer Dual Direct UPCB-01

407119A Hot Wire CFM Anemometer Dual Isolated UPCB-02

407123 Hot Wire Anemometer Dual Direct UPCB-01

407227 pH / mV / Temperature Dual Direct UPCB-01

407303 Conductivity Meter Dual Direct UPCB-01

407401 Dual Thermometer Dual Direct UPCB-01

407412 Thermo-Anemometer / Humidity Dual Direct UPCB-01

407428 IR Thermometer Single Direct UPCB-01

407445 RH / Temperature Meter Dual Direct UPCB-01

407495 Pressure meter Single Direct UPCB-01

407510 Dissolved Oxygen (DO) Meter Dual Direct UPCB-01

407768 Sound Level Meter Single Isolated UPCB-02

407777 Moisture Meter Single Direct UPCB-01

407820 Torque Meter Single Direct UPCB-01

407850 Vibration Meter Single Direct UPCB-01

407907 RTD Thermometer Single Direct UPCB-01

407910 Differential Pressure Manometer Single Direct UPCB-01

42525A IR Thermometer Single Isolated UPCB-02

475055 Force Gauge Single Direct UPCB-01

V5.0 5/06

Operation

Note: The Heavy Duty Meters have an Auto-Shutoff feature that automatically turns off the

meter (after 10 to 30 minutes depending on the model). This feature must be disabled during

a datalogging session. Press the ‘RECORD’ button on the meter to disable the Auto-Shutoff

feature.

Setting the Date and Time

The actual date and time should be programmed into the data logger prior to use. To

program the date and time:

1. Turn the data logger on.

2. Press the Date/Time button to enter the date and time setting mode.

3. While in the date and time setting screen hold down the Date/Time button until

“SET” appears on the screen, then release the Date/Time button. The screen will

begin blinking.

4. While the screen is blinking, pressing the Date/Time button allows the user to

scroll through Year, Month, Date, Hour, Min and Sec.

5. While the screen is still blinking, press the up arrow, (Function Button), to

adjust the number on the screen to the desired year, month, date, etc. Holding the

up arrow button down allows for rapid changing of the numerical value.

6. When the desired date and time is programmed, the logger will exit the time and

date setting function after a few seconds with no button presses.

Automatic Datalogging

This function sets the Datalogger to automatically collect readings at a sample rate set by

the user.

1. Connect the Dataloggers IN port to the Heavy Duty Meter

as shown in the illustration. (The supplied UPCB-03) cable

connects the meter to the Datalogger). Use the Isolated or

Direct port on the Datalogger according to the chart on

page 3.

2. Turn the power on.

3. Press the Function button until AUTO is displayed on LCD.

4. To set a new recording interval Press and Hold Sample Time button until display

flashes SET and HOUR.

Press ↑↓ to set hour. Then press Sample time to go to minutes

Press ↑↓ to set minutes. Then press Sample time to go to seconds

Press ↑↓ to set seconds. Then press Enter to save your interval setting.

Begin Automatic Datalogging

1. Press the PAUSE button to begin logging. The display will change from PS to RC

and begin logging.

2. Press PAUSE again the stop logging.

3. Use the PAUSE button to toggle recording ON (resume) and OFF (pause). When

datalogging is resumed, new readings are recorded right where the datalogger left

off so that readings are not overwritten.

V5.0 5/06

Clearing Logger Memory

1. Press and hold Clear button until CLR appears and display begins to flash. The

number displayed shows the % of memory used.

2. Press

↑↓ to select YS (Yes)

3. Press Enter. Display will flash 00. Memory is now clear.

NOTE: Data will remain in memory until the Datalogger memory is cleared (see previous

section) or until the batteries are removed.

Manual Datalogging

Manual datalogging allows the user to record one reading at a time.

1. Turn the Datalogger On.

2. Press the Function button until MANUAL is displayed on the LCD.

3. Press the PAUSE button to log one measurement. Display will change from PS to

RC and return to PS each time a recording is made..

V5.0 5/06

Transferring Data to a PC

Once data is collected, the next step is to connect the Datalogger to a PC and transfer the

collected readings.

Hardware Connection

Connect the Datalogger’s OUT port to the PC COM port

(as shown) via the supplied 3.5mm phono to DB-9 cable.

Refer to the compatible meter list for the correct cable and

“OUT” port for your meter..

WindowsTM Datalogger Software

Install the supplied software from the WindowsTM program CD-ROM using the instructions

provided on the CD-ROM. The following software screen will appear.

Software Screen Description

1. COM Port Selection (Use pull down menu to select port)

2. Data Transfer Status

3. Transferred Data View

4. Data File Name (type desired filename)

5. Number of readings

6. Instructional steps describing the data transfer process (additional steps are listed

in the next section).

7. Function buttons: START (click to begin data transfer); VIEW DATA (click to see all

transferred data as shown in item 3 above), and EXIT (click to close program)

REC

OUT

AUTO MANUAL %

2 1 5 4 6

3 7

V5.0 5/06

Data Transfer

To transfer data from a Heavy Duty meter to a PC.

1. Connect appropriate cable to PC and the logger. (See Compatible Meter List)

2. Power the Datalogger.

3. Select your com port.

4. Type a file name in the Data File Name field on the software screen.

5. Click on the START key in the software window

6. Press the Function button until LCD displays OUT

7. Press the PAUSE button on the Datalogger to begin the data transfer.

8. The LCD will count down as it transfers your data.

9. Press the PAUSE button to halt the transfer.

10. After the data points have been transferred, turn off the datalogger. Data will

remain in the datalogger as long as the batteries are fresh.

The data points are transferred to the file named in step 4 above. To view the transferred

data, click the VIEW DATA button on the software screen.

Record Format

The file stored on the PC can now be opened in other applications such as spreadsheet,

word-processor, database or graphics programs. Records are comma delimited.

When imported, each reading will appear as follows.

1,"060306120458","Time"

2,1173,"LUX "

Row ID, Time stamp, Unit

Row ID, Reading, Unit

Note: Each time stamp is saved as a 16 character reading as follows.

Year, Month, Day, Hours, Minutes, Seconds

Battery Replacement

Slide the rear battery cover off in the direction of the arrow. Replace the four ‘AA’ batteries

and secure the battery compartment cover.

V5.0 5/06

Specifications

Input type RS-232 data stream

Data storage 8000 readings (16 bits each)

Display LCD

Adjustable Sample Rate 1 second to 8hrs 59 minutes 59 seconds

Software compatibility WindowsTM 98, 2000, Me, and XP Operating Systems

Internal Clock Crystal oscillator

Memory Non-volatile; Data is retained at power down

Batteries Four 1.5V AA batteries (alkaline or heavy duty type)

Battery life 36 hours continuous (typical)

Power consumption Approx. 3.7mA DC

Operating temperature 32 to 122oF (0 to 50oC)

Operating humidity < 80 % RH

Weight 0.45 lbs. (205g) including battery

Dimensions 5.2 x 2.8 x 1.0" (131 x 70 x 26mm) (H x W x D)

V5.0 5/06



Support line (781) 890-7440

Technical support: Extension 200; E-mail: [email protected]

Repair & Returns: Extension 210; E-mail: repair@extech.com

Product specifications subject to change without notice

For the latest version of this User’s Guide, Software updates, and other

up-to-the-minute product information, visit our website: www.extech.com

Extech Instruments Corporation, 285 Bear Hill Rd., Waltham, MA 02451

Warranty

EXTECH INSTRUMENTS CORPORATION warrants this instrument to be free of defects

in parts and workmanship for one year from date of shipment (a six month limited warranty

applies to sensors and cables). If it should become necessary to return the instrument for

service during or beyond the warranty period, contact the Customer Service Department at

(781) 890-7440 ext. 210 for authorization or visit our website www.extech.com for contact

information. A Return Authorization (RA) number must be issued before any product is

returned to Extech. The sender is responsible for shipping charges, freight, insurance and

proper packaging to prevent damage in transit. This warranty does not apply to defects

resulting from action of the user such as misuse, improper wiring, operation outside of

specification, improper maintenance or repair, or unauthorized modification. Extech

specifically disclaims any implied warranties or merchantability or fitness for a specific

purpose and will not be liable for any direct, indirect, incidental or consequential damages.

Extech's total liability is limited to repair or replacement of the product. The warranty set

forth above is inclusive and no other warranty, whether written or oral, is expressed or

implied.

Calibration and Repair Services

Extech offers repair and calibration services for the products we sell. Extech also

provides NIST certification for most products. Call the Customer Service Department for

information on calibration services available for this product. Extech recommends that

annual calibrations be performed to verify meter performance and accuracy.

Back to the 380340 Product Info Page

Visit us at www.TestEquipmentDepot.com

Otros manuales para 380340

Tabla de contenidos

Otros manuales de Registrador de datos de Extech Instruments

Extech Instruments

Extech Instruments DL160 Manual de usuario

Extech Instruments

Extech Instruments RTH20 Manual de usuario

Extech Instruments

Extech Instruments THD5 Manual de usuario

Extech Instruments

Extech Instruments 407780 Manual de usuario

Extech Instruments

Extech Instruments DL160 Manual de usuario

Extech Instruments

Extech Instruments 42582 Manual de usuario

Extech Instruments

Extech Instruments SD800 Manual de usuario

Extech Instruments

Extech Instruments 382100 Manual de usuario

Extech Instruments

Extech Instruments 380340 Manual de usuario

Extech Instruments

Extech Instruments TH10 Manual de usuario

Extech Instruments

Extech Instruments SD900 Manual de usuario

Extech Instruments

Extech Instruments TM500 Manual de usuario

Extech Instruments

Extech Instruments 42280A Manual de usuario

Extech Instruments

Extech Instruments 42280 Manual de usuario

Extech Instruments

Extech Instruments EA80 Manual de usuario

Extech Instruments

Extech Instruments SD800 Manual de usuario

Extech Instruments

Extech Instruments RTH10 Manual de usuario

Extech Instruments

Extech Instruments 451126 Manual de usuario

Extech Instruments

Extech Instruments DL150 Manual de usuario

Extech Instruments

Extech Instruments Quick Start Manual de usuario

Extech Instruments

Extech Instruments PQ3470-2 Manual de usuario

Extech Instruments

Extech Instruments SDL2004 Manual de usuario

Extech Instruments

Extech Instruments TH10 Manual de usuario

Extech Instruments

Extech Instruments RHT30 Manual de usuario

Manuales populares de Registrador de datos de otras marcas

TESTO

TESTO 176 Manual de usuario

HT Italia

HT Italia XL421 Manual de usuario

HBM

HBM SOMAT XR CX22B-R Manual de usuario

Agtrix

Agtrix 380i Manual de usuario

Hobo

Hobo H8 Pro Manual de usuario

Beijing ART Tech

Beijing ART Tech PCI2320 Manual de usuario

Athena

Athena GET SL1 Manual de usuario

Motec Systems

Motec Systems C185 Manual de usuario

Beijing ART Tech

Beijing ART Tech USB2832 Manual de usuario

Rotronic

Rotronic HygroLog HL20 Manual de usuario

MRC

MRC DW-6092 Manual de usuario

Racelogic

Racelogic VBOX LapTimer Manual de usuario

Edu-Logger

Edu-Logger 900-240 Manual de usuario

Elma

Elma DT173 Manual de usuario

MadgeTech

MadgeTech PRTemp140 Hoja de especificaciones

Comet

Comet U0121M Manual de usuario

pico Technology

pico Technology PT-104 Manual de usuario

Soil Instruments

Soil Instruments GTecLink Manual de usuario