Event Lighting DGS400RGB Manual de usuario

DGS Laser

USER MANUAL

For safety, please read this user manual carefully before initial use.

Event Lighting reserves the right to revise the manual at any time. Information and specifications within this

manual are subject to change without notice. Event Lighting assumes no liability or responsibility for any

errors or omissions. Please consult Event Lighting for any clarification or information regarding this item.

www.event-lighting.com.au V1.0

CONTENTS

Safety Instructions

Product Installation

Rear Panel

Control Board Operation

- Standalone Mode

- DMX Modes

DMX Values

IR Remote control

Warranty

Laser Emission Data

Specifications

Safety Instructions

WARNING

• Do not open this device, there is no user-serviceable parts inside. Risk of electric shock.

• Do not look at the light source when the device is on.

• CAUTION: This unit's housing may be hot during and after operation.

• Install this device in a location with adequate ventilation, at least 20 inch (50 cm) from adjacent surfaces.

• Do not leave any flammable material within 50 cm of this unit while operating or connected to power.

• Use a safety chain when mounting this device overhead.

• Do not operate this device outdoors or in any location where dust, excessive heat, water, or humidity may affect it.

• Do not operate this device if the housing, lenses, or cables appear damaged.

• Do not connect this device to a dimmer or rheostat.

• ONLY connect this device to a grounded and protected circuit.

• ONLY use the hanging bracket to carry this device.

• In case of a serious operating problem, stop using immediately.

• The maximum ambient temperature is 104° F (40° C). Do not operate this device at higher temperatures.

• Do not point this laser toward people or crowds.

• Do not point this laser toward any area where you or the operator do not know where the beams are being directed.

• Use aperture cover whenever not in use.

• Use the key to lock the laser to avoid unauthorised use.

• Avoid direct eye contact with laser light. Never intentionally expose your eyes or others to direct laser light.

• This laser product can potentially cause instant eye injury or blindness if laser light directly strikes the eyes.

Power Input

This device has an auto-switching power supply work with input voltage range of 100~240 VAC, 50/60 Hz.

Product Installation

This device can be mounted in many orientations provided each individual device is secured by the use of correct

mounting bracket.

This device should be directed above the heads of people and do not direct it toward the line of sight of people

Refer to the diagram below

Use a safety chain when mounting this device overhead.

Rear Panel

1 DMX input 3PIN Male XLR port, using for DMX

2 DMX output 3PIN Female XLR port，using for DMX

Digital display

Display mode or address code

4 Safety Loop Attach the safety cable

5 Mic Sensitivity Knob Turn the knob (potentiometer) until the laser works in sync with the music.

6 Key Switch To turn the laser effect (laser diode) ON/OFF. Be sure that only authorized

operator hold the key

7 Buttons Choose Work Mode

8 Switch Switch on and off the power

9 Mains input With socket and integrated fuse holder

CONTROL BOARD OPERATION

Press the "MODE" button to enter the mode select state cycles display panel

display "AorS", "Soud", "AUTO", "d***", "SLAV", "OFF" six modes.

. "d***" mode, press "UP" or "DOWN" key to select the DMX address.

. Press the "ENTER" button to save the current operating mode or address code.

OPERATING MODE DESCRIPTION

DISPLAY MODE DESCRIPTION

Aors /

As_1 - As_6 Intelligent

Mode

Auto switch between "Auto Run Mode" and

"Sound Active Mode" , depends on if the

music exists or not.

Soud

Sd_1

Sd_6

Sound Active

Mode

Sound Active Mode

Auto

At_1 - At_6

Auto Run

Mode Auto Run Mode

d***

DMX512

Control Mode Press “UP” or “DOWN” to Set the DMX address

SLAV Slave Mode Slave mode

OFF

Standby

Mode

Press "MODE" button or use IR controllor

to select another operating mode

DMX CHANNELS DESCRIPTION:

CH1 / 12

Work Mode Selection

0 Blackout

1-49

Manual mode, out of bounds through the mode;

when the channel value is less than 5, the pattern

size will shrink.

50 - 99

Manual mode, out of bounds for the exhumation

mode, when the channel value is less than 55, the

pattern size will shrink.

100-149

Manual and sound mode, out of bounds across the

mode, when the channel value is less than 105, the

pattern size will shrink.

150-199

Manual and sound mode, out of bounds for the

exhumation mode, when the channel value is less

than 155, the pattern size will shrink.

200 -229 Auto mode

230 - 255 Sound Mode

CH2 / 13 Pattern Selection 0-255 Pattern selection, the value of a pattern 2, a total of

127 pattern optional.

CH3 / 14

Zoom

0-63 Static adjust the size

64-255

A dynamic size effect, every 32 value period, each to

different sizes, in the same segment, the larger the

value, the faster the operation.

CH4 / 15 Rotation

0-63 Static rotation adjustment

64-255

The dynamic effect of the rotation, each 32 value

period, each for a different effect of the rotation, in the

same segment, the larger the value the faster action.

CH5 / 16 X-axis rotation

0-63 The static horizontal movement of the adjustment.

64-255

The dynamic effect of the horizontal movement, each

32 value period, each for different horizontal

movement, in the same period, the value the greater

the faster action.

CH6 / 17 Y-axis rotation

0-63 The static vertical movement of the adjustment.

64-255

The dynamic vertical movement effect, each 32 value

period, each for a different vertical movement effect,

in the same period within the larger the value the

faster action.

CH7 / 18 Zoom 0-63 Static level of zoom adjustment..

64-255

Dynamic level of zoom effect, every 32 values for

some of each for different levels of zoom effect, in the

same paragraph, the greater the value the faster the

action.

CH8 / 19 Scale

0-63 The static vertical scaling adjustment.

64-255

Dynamic vertical zoom effect, every 32 values for

some, each for different vertical zoom effect, in the

same paragraph, the greater the value the faster the

action.

CH9 / 20 Regulation

0-63 Regulation the static of getting painted.

64-255 Adynamic crescendo painted effect, the greater the

value the faster the action.

CH10 / 21 Mode definition

0-127 The node definition, the larger the value, the sharper

the node.

128-255 Only display node (dot state), the larger the value,

the sharper the node.

CH11 / 22 Zoom

0-127 Static color choices, the value of a 16 color schemes.

128-191 The color effect of the whole pattern of the same

color, the larger the value, discoloration, the sooner.

192-255

Pattern primary color-based color effect, the larger

the value, discoloration, the sooner. When CH22

value of 255 or 191 when the node will be the second

pattern is the center point of the first pattern play

more of the same pattern of the array

IR REMOTE CONTROL DESCRIPTION:

WARRANTY

Please refer to your local dealer or please contact Event Lighting.

LASER EMISSION DATA

* As measured under IEC measurement conditions for classification.

Laser Classification：Class 3B

Green Laser Medium DPSS：Nd:YVO4+KTP,532nm

Red Laser Medium LD：GaAIAs 650nm,typical

Blue Laser Medium LD：InGaN 450nm, typical

Beam Diameter：r <5mm at aperture

Divergence(each beam)：<12 mrad

Divergence(total light) ：<90 degrees

Laser Power:200mW 650nm Red CW, 50mW 532nm Green CW, 150mW 450nm Blue CW

Transverse Beam Mode：TEM00

Scanning：ILDA 20 Kpps

SPECIFICTAIONS

Mains Input:AC100~240V, 50/60Hz

Fuse:250V /1.6A Slow Blow (20mm Glass)

Total Power:25W

X/YAxis Beam Angle:±20°

Laser Safety Standard:EN60825-1 2007

Condition Temperature:10~40℃

DMX Connections:3 pins XLR Male/Female

Net Weight:1.35Kg

Measurement: 216mm x 160mm x 71mm

POWER: Power on or standby Mode

AUTO:

Auto Run Mode SOUND: Sound Active Mode

Tabla de contenidos

Otros manuales de Equipo de DJ de Event Lighting

Event Lighting

Event Lighting BLINDER Series Manual de usuario

Event Lighting

Event Lighting Fresnel Manual de usuario

Event Lighting

Event Lighting PARP12x8 Manual de usuario

Event Lighting

Event Lighting DERBY3 Manual de usuario

Event Lighting

Event Lighting PAR12x8A Manual de usuario

Event Lighting

Event Lighting PS200LECW Manual de usuario

Event Lighting

Event Lighting DARKSTAR Manual de usuario

Event Lighting

Event Lighting F100WWMZ Manual de usuario

Event Lighting

Event Lighting SABER2 Manual de usuario

Event Lighting

Event Lighting LM60S Manual de usuario

Event Lighting

Event Lighting ORBIT2 Manual de usuario

Event Lighting

Event Lighting Fresnel Manual de usuario

Event Lighting

Event Lighting PAR12X12L Manual de usuario

Event Lighting

Event Lighting M1B60W Manual de usuario

Event Lighting

Event Lighting PAR19X12L Manual de usuario

Event Lighting

Event Lighting M1S180W Manual de usuario

Event Lighting

Event Lighting PANBEAM4x4x10 Manual de usuario

Event Lighting

Event Lighting StrobeX Manual de usuario

Event Lighting

Event Lighting PAN2*1*30 Manual de usuario

Event Lighting

Event Lighting M1S190W Manual de usuario

Event Lighting

Event Lighting F100WWMZ Manual de usuario

Event Lighting

Event Lighting M1S80W Manual de usuario

Event Lighting

Event Lighting SURF640 Manual de usuario

Event Lighting

Event Lighting KONTROL36 Manual de usuario

Manuales populares de Equipo de DJ de otras marcas

ALPHA LITE

ALPHA LITE ALPHA 1500 Manual del propietario

Chauvet

Chauvet OVATION E-930VW Manual de usuario

Zumtobel

Zumtobel APHRODITE Home Manual de usuario

Snow Masters

Snow Masters Zig Oscillator Manual de usuario

EuroLite

EuroLite 50530554 Manual de usuario

Beamz

Beamz BUV243 Manual de usuario

thomann

thomann Stairville DJ Lase 40-G MK-III Manual de usuario

Eagletone

Eagletone 6 Eyes Flower Manual de usuario

EuroLite

EuroLite FLD-1508 Manual de usuario

Technical Pro

Technical Pro LG8xSEA Manual de usuario

JB Systems

JB Systems Lounge Laser DMX Manual de usuario

Lightmaxx

Lightmaxx Vega Halo 90 Manual de usuario

Elation

Elation FUZE WASH Z350 Manual de usuario

Maverick

Maverick MK3 WASH Manual de usuario

Infinity

Infinity TF-260C7 Fresnel Manual de usuario

Chauvet

Chauvet EVE E-50Z Manual de usuario

Eliminator Lighting

Eliminator Lighting E 138 Manual de usuario

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Manual de usuario