EtherWAN EMC1200R Manual de usuario
12-Bay Media Converter System
User’s Manual 1
Preface
This manual describes how to install and use the 12-Bay Media
Converter System. The system introduced here is capable of
housing up to twelve media converters, each of which offers a
single channel media conversion solution:
10/100Base-TX ↔100Base-FX
100Base-TX ↔100Base-FX
100Base-FX ↔100Base-FX
10/100/1000Base-TX ↔1000Base-SX/LX
1000Base-T ↔1000Base-SX/LX
1000Base- SX/LX ↔1000Base-SX/LX
In this manual, you will find:
•An introduction to the system
•Product features
•Illustrative LED functions
•Installation instructions
•Specifications
12-Bay Media Converter System
2 User’s Manual
Table of Contents
PREFACE 1
TABLE OF CONTENTS 2
PRODUCT OVERVIEW 3
12-BAY MEDIA CONVERTER SYSTEM 3
PACKAGE CONTENTS 3
PRODUCT FEATURES 4
FRONT PANEL DISPLAY 4
Front Panel 4
Understanding LEDs 5
INSTALLATION 8
SELECTING A SITE FOR THE EQUIPMENT 8
CONNECTING TO POWER 9
SPECIFICATIONS 10
12-Bay Media Converter System
User’s Manual 3
Product Overview
12-Bay Media Converter System
The 12-Bay Media Converter System can house up to twelve media
converters in a 1U standard 19” rackmountable size. The front
panel of the 12-Bay Media Converter System provides status LEDs.
Figure 1: 12-Bay Media Converter System
Package Contents
When you unpack the product’s package, you should find the items
listed below:
3
12-Bay Media Converter System
3
Two AC power cords
3
User’s manual
3
Rackmount ears with screws
Please inspect the contents, and report any apparent damage or
missing items immediately to your authorized reseller.
12-Bay Media Converter System
4 User’s Manual
Product Features
♦Houses twelve channels of media conversion
♦Front panel status LEDs
♦Standard 19” rackmountable size, 1U high
♦2 Redundant Power Supplies
♦12-Bay 10/100Base-TX to 100Base-FX converters, 100Base-
TX to 100Base-FX converters, 100Base-FX to 100Base-FX
converters, 10/100/1000Base-TX to 1000Base-SX/LX
converters, 1000Base-T to 1000Base-SX/LX converters, or
1000Base-SX/LX to 1000Base-SX/LX converters
Front Panel Display
FRONT PANEL
The front panel of this 12-Bay Media Converter System shows the
layout of the twelve media converter channels.
There are 12 sets of LED indicators, which provide you with
instant feedback on the status of each media converter channel.
Figure 2: Front Panel of the 12-Bay Media Converter System
12-Bay Media Converter System
User’s Manual 5
UNDERSTANDING LEDS
10/100TX to 100FX Media Converter
LEDs State Indication
Steady Power on
PWR stands for POWER
PWR
Off Power off
Steady Connection at the speed of 100Mbps100 (Mbps)
Off Connection at the speed of 10Mbps
Steady A valid network connection established
LNK stands for LINK
Flashing Transmitting or receiving data
ACT stands for ACTIVITY
LNK/ACT
Off Neither valid network connection
established nor transmitting/receiving
data.
Steady Connection in full duplex mode
FDX stands for FULL-DUPLEX
Flashing Collision occurred
COL stands for COLLISION
FDX/COL
Off Connection in half-duplex mode
100TX to 100FX Media Converter
LEDs State Indication
Steady Power onPower
Off Power off
Steady Connection at the speed of 100MbpsLNK
Off No connection at the Speed of 100Mpbs
Steady A valid network connection established
Flashing Transmitting or receiving data
ACT
Off Neither valid network connection nor
transmitting/ receiving data
12-Bay Media Converter System
6 User’s Manual
100FX to 100FX Media Converter
LEDs State Indication
Steady Power onPWR
Off Power off
Steady
A
valid network connection established,
Transmitting and Receiving
SDA/ SDB
(100FX)
Off Neither valid network connection nor
transmitting established
10/100/1000TX to 1000SX/LX Media Converter
LEDs State Indication
Steady Power feeding inPWR
Off No power
Steady A valid network connection established.
LNK stands for LINK.
Flashing Transmitting and receiving data.
ACT stands for ACTIVITY.
LNK/ACT
(TX)
Off Neither connection nor activity existing.
Steady A valid network connection established.
LNK stands for LINK.
Flashing Transmitting and receiving data.
ACT stands for ACTIVITY.
LNK/ACT
(SX/LX)
Off Neither connection nor activity existing.
Steady Connection in full duplex mode.
FDX stands for FULL DUPLEX.
Flashing Collision occurred.
FDX
Off Connection in half duplex mode
1000 Steady Connection at 1000Mbps speed.
100 Steady Connection at 100Mbps speed.
1000, 100 Off Connection at 10Mbps speed.
12-Bay Media Converter System
User’s Manual 7
1000T to 1000SX/LX Media Converter
LEDs State Indication
Steady Power feeding inPower
Off No power
Steady TX port: A valid network connection
established. LNKC stands for LINK/Copper
LNKC
Off No connection
Steady FX port: A valid network connection
established. LNKF stands for LINK/Fiber
LNKF
Off No connection
FDX/COL Steady Connection in full duplex mode
FDX stands for FULL DUPLEX
Steady Receiving dataRX
Off No reception
Steady Transmitting dataTX
Off No transmission
1000SX/LX to 1000SX/LX Media Converter
LEDs State Indication
Steady Power feeding inPower
Off No power
Steady Port A Signal Detect:
A valid network connection established.
SDA
Off No connection
Steady Port B Signal Detect:
A valid network connection established.
SDB
Off No connection
12-Bay Media Converter System
8 User’s Manual
Installation
Selecting a Site for the Equipment
As with any electric device, you should place the equipment where
it will not be subjected to extreme temperatures, humidity, or
electromagnetic interference. Specifically, the site you select
should meet the following requirements:
- The ambient temperature should be between 32 and 113
degrees Fahrenheit (0 to 45 degrees Celsius).
- The relative humidity should be less than 95 percent,
non-condensing.
- Surrounding electrical devices should not exceed the
electromagnetic field (RFC) standards for IEC 801-3, Level 2
(3V/M) field strength.
- Make sure that the equipment receives adequate ventilation.
Do not block the ventilation holes on each side of the
equipment or the fan exhaust port on the side or rear of the
equipment.
-The power outlet should be within 6 feet (1.8 meters) of the
equipment.
12-Bay Media Converter System
User’s Manual 9
Connecting to Power
Step 1: Connect the supplied AC power cords to the receptacles on the
rear panel of the system.
Step 2: Attach the plugs from each of the dual power supplies into
standard AC outlets with a voltage range from 100~240VAC.
Step 3: Turn on the system by flipping the ON/OFF switches beside the
dual power supplies’ receptacles to the ON position.
Step 4: The power LED of each media converter will shine after turning on
the system.
Step 5: The link LED of each media converter will shine after connecting
twisted pair copper cabling between the TX port (or fiber optic
cabling between the FX port) and another working networked
device.
Figure 3: Rear view of the 12-Bay Media Converter System
12-Bay Media Converter System
10 User’s Manual
Specifications
Applicable
Standards
IEEE 802.3 10Base-T, IEEE 802.3u
100Base-TX/FX, IEEE 802.3ab
1000Base-T, IEEE 802.3z 1000Base-
SX/LX
Speed –
10Base-T
100Base-TX/FX
1000Base-T/SX/LX
10/20Mbps for half/full-duplex
100/200Mbps for half/full-duplex
2000Mbps for full-duplex
Forwarding rate 14,880pps for 10Mbps
148,810pps for 100Mbps
1,488,100pps for 1000Mbps
Dimensions 440mm (W) × 243mm (D) × 45mm (H)
(17.32” (W) x 9.57” (D) x 1.77” (H))
Weight 3.1Kg (6.82lbs.)
Power 100 ~ 240VAC, 50 ~ 60Hz
Power Consumption 55.2W Max.
Operating
Temperature
0℃~ 45℃(32℉~ 113℉)
Storage
Temperature
-10℃~ 70℃(14℉~ 158℉)
Humidity 5 ~ 95%, non-condensing
Emission
Compliance
CE Mark Class A, FCC Part 15 Class A
Otros manuales para EMC1200R
1
Tabla de contenidos
Otros manuales de Convertidor de medios de EtherWAN
EtherWAN
EtherWAN EMC1600 Series Manual de usuario
EtherWAN
EtherWAN EL2211 Manual de usuario
EtherWAN
EtherWAN EL900 Series Manual de usuario
EtherWAN
EtherWAN EL1032T Series Manual de usuario
EtherWAN
EtherWAN EL100 Manual de usuario
EtherWAN
EtherWAN EL2242 Series Manual de usuario
EtherWAN
EtherWAN EL9100 Manual de usuario
EtherWAN
EtherWAN EL1032T Series Manual de usuario
EtherWAN
EtherWAN EL1142 Series Manual de usuario
EtherWAN
EtherWAN EL2326 Series Manual de usuario
EtherWAN
EtherWAN EL900 Series Manual de usuario
EtherWAN
EtherWAN EL50 Series Manual de usuario
EtherWAN
EtherWAN EL2242 Series Manual de usuario
EtherWAN
EtherWAN EL2242 Manual de usuario
EtherWAN
EtherWAN EM1100 Manual de usuario
EtherWAN
EtherWAN EL110 Series Manual de usuario
EtherWAN
EtherWAN EL900 Series Manual de usuario
EtherWAN
EtherWAN EL100 Manual de usuario
EtherWAN
EtherWAN EL100 Manual de usuario
EtherWAN
EtherWAN EL50 Series Manual de usuario
