ETC ALiEn2 Manual de usuario

Step 2 - Setup Security

a) Press instll.

c) Enter the default login of 000-0000.

b) Scroll down to the Security menu.

b) Press selct and scroll down until you

see Operator ID.

d) Press selct and set the desired ID.

e) Change the Installer ID in the same

manner.

Step 3 - Set Date/Time

a) Press instll and scroll to Date/Time.

b) Press selct to enter the menu.

c) Adjust the Date and/or Time.

d) Set the Daylight savings time option to

on if desired.

Step 4 - Controller Setup

a) Press instll and then scroll to Inputs.

b) Enable and congure any required

devices.

c) Press cncl to back out to the menu.

d) Scroll to Outputs to enable additional

valves in the same manner.

e) Enter the Alarms menu to congure the

behaviour when failures occur.

f) Enter Optimize to set the optimization.

Note: Changes to install settings do not

take eect until the next Close cycle.

Step 5 - Start Controller

a) Press clse or opn to reset the controller

to a given state.

b) The controller will set the valves and the

screen will update to show the current

state and remaining time.

install

select

cancel

open

select

install

select

install

Step 1 - Wire Back Panel

a) Plug in Valve Connectors.

b) Connect Field Devices.

- 2 Wire Switches are wired to COM and SIG.

- 3 Wire Sensors are wired to PWR, COM and SIG.

c) Plug in Battery Connection.

d) Connect Solar Panel.

PWR

SIG

COM

Quick Install

Guide

www.ETCorp.ca

Changing Timers/Set Points

a) Press setin.

b) Use the up/down arrow keys to scroll

through each setting.

c) Press selct to edit a given setting.

Note: Most timers are related to each

other and will auto adjust. Values entered

below the min or above the max will be

adjusted automatically.

Note: Timer settings do not take eect

until the next Close cycle.

Adding/Removing Devices

a) Press instl and then scroll to the Inputs

menu.

b) Press selct and then scroll through each

screen.

c) Press selct to edit a given setting.

Note: Additional device screens are

hidden until the device is enabled.

Note: Changes to input settings do not

take eect until the next Close cycle.

Change State Manually

a) From the main screen, press selct.

b) Select yes, and then set the desired state

and time.

c) The controller will enter the desired state

and then resume normal operation once

complete.

Modifying Alarms

a) Press instll and scroll to the Alarms

menu.

b) Scroll to the desired alarm setting and

press selct to modify it.

Note: Fast Trip and Non Arrival alarms are

consecutive occurances.

install

select

settings

install

select

Congure Modbus

a) Press instll and scroll to the Modbus

menu.

b) Press selct to enter the menu.

c) Select the Modbus Port and set it to

enabled.

d) Scroll through each setting, ensuring

that it matches the Modbus master.

Note: To communicate properly, all

communication settings must match the

master’s settings.

install

select

View History

a) Press htry to enter the History menu.

b) Selct the type of history you wish to see.

c) Scroll through each history screen.

Note: All logs in the history menu have

multiple records displayed in reverse

chronological order.

history

select

ET-12000-1018-0000 rev 3

www.ETCorp.ca

Quick Tips

Otros manuales de Controladores de ETC

ETC

ETC Paradigm P-TS7-PE Manual de usuario

ETC

ETC echoflex ELEDR Manual de usuario

ETC

ETC Echoflex ELED1-BUN Manual de usuario

ETC

ETC DEBC Manual de usuario

ETC

ETC QuickTouch Preset Handheld Manual de usuario

ETC

ETC Foundation Rigging Controller Manual de instalación y operación

ETC

ETC echoflex ElahoTouch Manual de usuario

ETC

ETC Unison Mosaic Manual de usuario

ETC

ETC Element Manual de usuario

ETC

ETC F-Drive W1 Series Manual de usuario

ETC

ETC QuickTouch Preset Manual de usuario

ETC

ETC echoflex ELEDR Manual de usuario

ETC

ETC ION Manual de usuario

ETC

ETC Unison Aero Manual de usuario

ETC

ETC Echoflex ELED1H Manual de usuario

ETC

ETC Unison Foundry Manual de usuario

ETC

ETC Echoflex ELED2-BU Manual de usuario

ETC

ETC DMX DEBC-1 Manual de usuario

ETC

ETC Unison Foundry Relay Controller Manual de usuario

ETC

ETC Echoflex Elaho Inspire Station Instrucciones de funcionamiento

ETC

ETC echoflex ELED1 Manual de usuario

ETC

ETC Echoflex ELED3 Manual de usuario

ETC

ETC Expression Guía de configuración

ETC

ETC EchoDIN Power Control Processor Mk2 Manual de usuario

Manuales populares de Controladores de otras marcas

Digiplex

Digiplex DGP-848 Instrucciones de funcionamiento

YASKAWA

YASKAWA SGM series Manual de usuario

Sinope

Sinope Calypso RM3500ZB Manual de usuario

Isimet

Isimet DLA Series Style 2 Manual de instalación

LSIS

LSIS sv-ip5a Manual de usuario

Rockwell Automation

Rockwell Automation 1769-L31 Manual de usuario

Airflow

Airflow Uno hab Manual de usuario

ABB

ABB ACS580-01 drives Manual de usuario

Panasonic

Panasonic GM1 Series Manual de usuario

Emerson

Emerson SW93 Manual de usuario

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manual de usuario

Panasonic

Panasonic FP? Positioning Unit RTEX Manual de usuario

Samson

Samson Type 5824 Manual de servicio

Alpha IP

Alpha IP MIOB 21001 Manual de usuario

Siemens

Siemens OpenAir GMA 1 Series Manual de usuario

Surecom

Surecom SR-629 Manual de usuario

Fishman

Fishman TriplePlay Manual de usuario

Regulus

Regulus SRS1 T Manual de usuario