EPOX EP-3WXM2 Manual de usuario

TRADEMARK

All products and company names are trademarks or registered

trademarks of their respective holders.

These specifications are subject to change without notice.

Manual Revision 3.1

July 7, 1999

A CelerA Celer

A Celeronon

onon

onTMTM

TMTM

TM SocSoc

SocSoc

Sockk

ket 370 Pret 370 Pr

et 370 Pret 370 Pr

et 370 Processorocessor

ocessorocessor

ocessor

based Intel 810 Chipsetbased Intel 810 Chipset

based Intel 810 Chipset

mainboarmainboar

mainboard (100/66MHz)d (100/66MHz)

d (100/66MHz)d (100/66MHz)

d (100/66MHz)

EP-3WXMEP-3WXM

EP-3WXM

EP-3WXM2EP-3WXM2

EP-3WXM2

EP-3WXM4EP-3WXM4

EP-3WXM4

EP-3WXM/2/4

User Notice

No part of this product, including the product and software may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any

language in any form without the express written permission of EPoX Computer

Company (hereinafter referred to as EPoX) except for documentation kept by the

purchaser for backup purposes.

We provide this manual “as is” without warranty of any kind, either expressed or

implied, including but not limited to the implied warranties or conditions of

merchantability or fitness for a particular purpose. In no event shall EPoX be

liable for any loss of profits, loss of business, loss of use or data, interruption of

business or for indirect, special incidental, or consequential damages of any kind,

even if EPoX has been advised of the possibility of such damages arising from any

defect or error in the manual or product. EPoX may revise this manual from time

to time without notice. For updated BIOS, drivers, or product release information

you may visit our websites at http://www.epox.com or http://www.epox.com.tw.

Products mentioned in this manual are mentioned for identification purposes only.

Product names appearing in this manual may or may not be registered trademarks

or copyrights of their respective companies. The product name and revision

number are both printed on the mainboard itself.

Handling Procedures

Static electricity can severely damage your equipment. Handle the EP-3WXM/2/4

and any other device in your system with extreme care and avoid unnecessary

contact with system components on the mainboard. Always work on an antistatic

surface to avoid possible damage to the mainboard from static discharge. Always

have the power supply unplugged and powered off when inserting and removing

devices within the computer chassis. EPoX assumes no responsibility for any

damage to the EP-3WXM/2/4 mainboard that results from failure to follow

instruction or failure to observe safety precautions.

CAUTION

The EP-3WXM/2/4 mainboard is subject to

damage by static electricity. Always

observe the handling procedures.

EP-3WXM/2/4

Technical Support Services

If you need additional information, help during installation or normal use of this

product, please contact your retailer. Your retailer will have the most current

information about your configuration. If your retailer cannot help, you may visit

our online technical support website and/or contact our support technicians at the

locations listed below.

Record your serial number before installing your EP-3WXM/2/4 mainboard. (The

serial number is located near the PCI slots at the edge of the board.)

EP-3WXM/2/4 serial number: _______________________________

Contacting Technical Support

EPoX technical support is working hard to answer all of your questions online.

From our website you can find answers to many common questions, drivers, BIOS

updates, tech notes, and important technical bulletins. If you are still unable to

locate the solution you are seeking, you always have the option to contact our

support technicians directly.

North American website (English language)

http://www.epox.com

[email protected]

European website (Multi-language)

http://www.epox.nl

[email protected]

Taiwan website (Chinese language)

http://www.epox.com.tw

[email protected]

Thank you for using EPoX mainboards!

EP-3WXM/2/4

Table of Contents

Section 1 Introduction

Components Checklist..............................................1-1

Overview

Intel Celeron processors, the plastic pin grid array

(P.P.G.A.) 370.........................................................1-2

The plastic pin grid array (P.P.G.A.) 370 processor

Installation and Removal ..........................................1-3

Intel(R) 810 chipset features ....................................1-4

EP-3WXM/2/4 Form-Factor....................................1-6

I/O Shield Connector................................................1-7

Power-On/Off (Remote) ..........................................1-7

System Block Diagram.............................................1-8

Section 2 Features

EP-3WXM/2/4 Features ..........................................2-1

Section 3 Installation

EP-3WXM/2/4 Detailed Layout...............................3-2

Easy Installation Procedure

Configure Jumpers ...................................................3-3

System Memory Configuration ................................3-4

Device Connectors ...................................................3-7

External Modem Ring-in Power ON and

Keyboard Power ON Function (KBPO) ..................3-9

Section 4 Award BIOS Setup

Main Menu ...............................................................4-1

Standard CMOS Setup.............................................4-3

Advanced BIOS Features.........................................4-7

Advanced Chipset Features ......................................4-10

Integrated Peripherals...............................................4-13

Power Management Setup .......................................4-16

PNP/PCI Configuration Setup .................................4-19

Page

EP-3WXM/2/4

PC Health Status ......................................................4-21

Frequency/VoltageControl .......................................4-22

Defaults Menu..........................................................4-23

Supervisor/User Password Setting ...........................4-24

ExitSelecting ............................................................4-25

Section 5 810 VGA and Sound Driver Installation

Easy Driver Installation ............................................5-1

Appendix Appendix A

Memory Map ...........................................................A-1

I/O Map....................................................................A-1

Timer & DMA Channels Map..................................A-2

Interrupt Map ...........................................................A-2

RTC & CMOS RAM Map.......................................A-3

Appendix B

POST Codes ............................................................A-5

Appendix C

Load Optimized Defaults .........................................A-13

EP-3WXM/2/4

Page Left Blank

IntroductionEP-3WXM/2/4

Page 1-1

Section 1

INTRODUCTION

Components Checklist

üü

üA. (1) EP-3WXM/2/4 mainboard

üü

üB. (1) EP-3WXM/2/4 user’s manual

üü

üC. (1) Floppy ribbon cable

üü

üD. (1) Hard driver ribbon cables

Hard drive for UltraATA66/33 an 80 conductor cable(Optional)

üü

üE. (1) RS-232 9-PIN ribbon cable

F. (1) PS/2 to AT keyboard connector adapter (optional)

üü

üG. (1) Onboard Graphic and Sound Driver

USER’S

MANUAL

EP-3WXM/2/4

Introduction EP-3WXM/2/4

Page 1-2

Overview

Intel Celeron processors, the plastic pin grid array

(P.P.G.A.) 370

The Intel Celeron processors provide power to handle the internet, educational

programs, interactive 3D games, and productivity applications. The Intel Celeron

processors at 466, 433, 400, 366, 333 and 300A MHz include integrated L2 cache

128Kbyte. The core for the 466, 433, 400, 366, 333 and 300A MHz processors

have 19M transistors due to the addition of the integrated L2 cache 128Kbyte. All

the Intel Celeron processors are available in the plastic pin grid array (P.P.G.A.)

form factor. The P.P.G.A. form factor is compatible with the 370 pin socket. All

the Intel Celeron processors are available in the plastic pin grid array (PPGA)

package. The PPGA package is compatible with the 370 pin socket and provides

more flexibility to design low cost systems by enabling lower profile and smaller

systems and providing the potential for reducing costs of processor retention and

cooling solutions. Like the Intel Celeron processors that utilize S.E.P.P., the Intel

Celeron processors that use P.P.G.A., feature a P6-microarchitecture-based core

processor on a single-sided substrate without BSRAM componentry.

The Intel Celeron processor at 466, 433, 400, 366, 333, and 300A MHz. Includes

Intel MMX[tm] media enhancement technology. Offers Dynamic Execution

technology.

Includes a 32Kbyte (16Kbyte/16Kbyte) non-blocking, level-one cache that provides

fast access to heavily used data. Intel Celeron processors at 466, 433, 400, 366,

333 and 300A MHz include integrated L2 cache 128Kbyte. All the Intel Celeron

processor utilize the Intel P6 microarchitecture’s multi-transaction system bus at

66MHz. The 466, 433, 400, 366, 333 and 300A MHz processors utilize the Intel

P6 microarchitecture’s multi-transaction system bus with the addition of the L2

cache interface. The combination of the L2 cache bus and the processor-to-main-

memory system bus increases bandwidth and performance over single-bus

processors.

Intel MMX technology includes new instructions and data types that allow

IntroductionEP-3WXM/2/4

Page 1-3

applications to achieve a new level of performance. Intel’s MMX technology is

designed as a set of basic, general-purpose integer instructions that are easily

applied to the needs of a wide diversity of multimedia and communications

applications. The highlights of the technology are:

* Single Instruction, Multiple Data (SIMD) technique

* 57 new instructions

* Eight 64-bit wide MMX technology registers

* Four new data types

The plastic pin grid array (P.P.G.A.) 370 processor

Installation and Removal

Installation:

Install the processor and the fan heatsink using the Installation Notes provided

with the boxed processor. First, raise the handle of the 370-pin socket. Carefully

install the processor into the 370-pin socket making sure that none of the pins are

bent. Then close the handle of the socket. Next install the fan heatsink. Make sure

to install the heatsink onto the processor after the processor has been inserted

into the 370-pin socket. Place the fan heatsink onto the processor such that the

integrated clip lines up with the socket’s attach tabs. This will align the fan cable

with the PGA370 mark on the 370-pin

socket. Remember not to damage the

thermal interface pad. Attach the clip onto

the socket’s attach tabs. (A small tool, such

as a pen, may make this process easier.) Take

care to consider potential scraping of the

motherboard underneath the 370-pin socket

attach tabs. Connect the attached fan power

cable to the motherboard connector and

quickly power on the system to verify that

the processor fan is running.

Introduction EP-3WXM/2/4

Page 1-4

Removal:

To simplify the following process, consider removing the motherboard from the

chassis before removing the processor. First, unplug the fan power cable from the

motherboard’s connector. Then pull the integrated clip away from the socket’s tab

nearest the fan cable. (A small tool, such as a pen or screwdriver, may make this

process easier.) Once the clip is free, slowly lift the fan heatsink straight up away

from the socket and the processor. (If the processor has been in operation for a

long period of time, then this step may require some extra force; this is because the

heat dissipated from the processor will have affected the thermal interface pad)

Next, lift up the handle of the 370-pin socket. Finally, carefully remove the proces-

sor from the socket making sure not to bend any of the processor pins.

Intel(R) 810 chipset features

The Intel(R) 810 chipset that Built on the strong foundation of Intel(R) 440BX

AGPset technology, the Intel(R) 810 chipset has re-engineered the Value PC,

providing next generation features and great graphics performance.

The 82810 Graphics Memory Controller Hub (GMCH) features : Intel(R)

graphics technology and software drivers, using Direct AGP (integrated AGP) to

create vivid 2D and 3D effects and images. The 82810 chip feature integrated

Hardware Motion Compensation to improve soft DVD video quality.

The Inte(R) 82810 chipset use Intel(R) Dynamic Video Memory Technology (D.

V.M.T.) is an architecture that offers breakthrough performance for the

(motherboard) PC through efficient memory utilization and Direct AGP. The

system OS uses the Intel software drivers and intelligent memory arbiter to

support richer graphics applications.

The 82801 I/O Controller Hub (ICH) employs the Intel(R) Accelerated Hub

Architecture to make a direct connection from the graphics and memory to the

integrated AC97 controller, the IDE controllers (ATA/66 or ATA/33), dual USB

ports, and PCI add-in cards.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Placa madre de EPOX

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manual de usuario