EPOX BX3 Manual de usuario

TRADEMARK

All products and company names are trademarks or registered

trademarks of their respective holders.

These specifications are subject to change without notice.

Manual Revision 3.2

July 23, 1999

BX3

A PA P

A Pentiumentium

entiumentium

entium®®

®®

®II or PII or P

II or PII or P

II or Pentiumentium

entiumentium

entium®®

®®

®IIIIII

IIIIII

III

Slot1 Processor based AGPSlot1 Processor based AGP

Slot1 Processor based AGP

motherboard (100/66MHz)

FeaturesBX3

Page 1

FEATURES

BX3 Features:

•BX3 is based on the Pentium®II or Pentium®III Processor operating at 233

~ 333MHz (66MHz) or 350 ~ 500MHz (100MHz) on Slot 1. The board is

configured by an Easy-Setting-Dual-Jumper (E.S.D.J.) to match your CPU

clock speed.

•Designed with Intel’s 82443 BX AGPset.

•Supports up to 768 MB of DRAM (minimum of 16 MB) on board, You can

use 168-pin DIMM x 3. It will automatically detect Extended Data Output

(EDO) DRAM at 66MHz only or Synchronous DRAM memory (SDRAM) at

66MHz or 100MHz (please see Section 3-2).

•BX3 will support Error Checking and Correcting (ECC) when using paritys

DRAM memory modules. This will detect multiple bit errors and correct 1-bit

memory errors.

•Supports (2) 16 bit ISA slots, (5) 32 bit PCI slots, (1) AGP slot and provides

(2) independent high performance PCI IDE interfaces capable of supporting

PIO Mode 3/4 and Ultra DMA 33 devices. The BX3 supports (5) PCI

Bus Master slots and a jumperless PCI INT# control scheme which reduces

configuration confusion when plugging in PCI card(s).

•Supports ATAPI (e.g. CD-ROM) devices on both Primary and Secondary IDE

interfaces.

•Designed with Winbond W83977TF Multi I/O: (1) floppy port, (1) parallel port

(EPP, ECP), and (2) serial ports (16550 Fast UART).

Note: Japanese “Floppy 3 mode” is also supported

•Includes a PS/2 mouse connector.

•Allows use of a PS/2 keyboard.

•Features Award Plug & Play BIOS. With Flash Memory you can always

upgrade to the current BIOS as they are released. (http://www.2themax.com

please visit our Technical Support section for the latest updates)

FeaturesBX3

Page 2

•BX3 utilizes a Lithium battery which provides environmental protection and

longer battery life.

•Supports the Universal Serial Bus (USB) connector. The onboard PIIX4E chip

provides the means for connecting PC peripherals such as; keyboards,

joysticks, telephones, and modems.

•Built-in ATX 20-pin power supply connector.

•Software power-down when using Windows®95/98.

•Supports ring-in feature (remote power-on through external modem, allows

system to be turned on remotely).

•Resume by Alarm - Allows your system to turn on at a preselected time.

•Power Loss Recovery - In the event of a power outage your system will

automatically turn itself back on without user intervention.

•Supports CPU Hardware sleep and SMM (System Management Mode).

•Supports Desktop Management Interface (DMI) facilitating the management

of desktop computers, hardware and software components and peripherals,

whether they are stand-alone systems or linked into networks. (optional)

•Supports Hot key, Any key or password Keyboard power ON function

(KBPO).

•Supports USDM software to offer motherboard various status on Windows®

95/98, or Windows®NT 4.0/5.0.

•Supports the CPU, PWR and Chassis fan Auto stop in sleep mode.

•Supports the System Power LED (PANEL) blinks in the sleep mode.

•Built-in WOL (Wake On LAN) Connector.

• Built-in SB-LINK Header for Creative Blaster®AWE64D PCI Bus Sound

Card.

InstallationBX3

Page 3

Figure 1

BX3 Detailed Layout

AGP SLOT

PCI Slot #1

PCI Slot #2

ISA Slot #1

ISA Slot #2

Battery

ATX Power Input

Winbond

83977

I/Oset

USB 1

(Top)

Mouse

(Top)

USB 0

(Bottom)

Keyboard

(Bottom)

IDE2

Secondary IDE

IDE1

FDD1

CPU Cartridge SLOT 1

J7:WOL

DIMM 2

DIMM 1 Bank 0

Bank 1

DIMM 3 Bank 2

Flash Memory

for BIOS

PCI Slot #3

PCI Slot #4

PCI Slot #5

COM 1COM 2COM 2

USB

PS/2

ESDJ

JP3

124MHz

110MHz

100MHz

66MHz

AUTO

5.5X

4.5X

3.5X

1 2

27 28

133MHz

Parallel Port

SB_Link

CHASSIS FAN

POWER

FAN

JP13

JP1

POWER_ON

IR CONN.

RESET

SPK

KEYLOCK

CPU FAN

6.5X

InstallationBX3

Page 4

Easy Installation Procedure

The following must be completed before powering on your new system:

Configure Jumpers to match your hardware

Install memory chips

Device Connectors

Configure Jumpers

We design this motherboard with the an ESDJ to make your install fast and easy.

The following will describe all of the ESDJ that you are required to set before moving

on to step 2.

Note: The ESDJ as depicted as shown (Figure 1) in their correct physical

orientation.

JP13

(Default)

Keyboard Power-ON function (refer the section 3-5)

JP13 = 1-2 - Enabled

= 2-3 - Disabled

J7 WOL (Wakup On Lan) Connector

Reserved for NIC (Network Interface Card) to

Wake the System.

JP1 = 1-2 - Run Mode (Default)

= 2-3 - Clear CMOS (momentarily)

JP1 CMOS Clear

J8 SB-LINK Header

Reserved for Creative SB-LINK (Sound Blaster

LINK ) with the Sound Blaster AWE64D PCI

Sound Card to Compatible DOS games and

Multimedia applications.

InstallationBX3

Page 5

Note: Based on the implementation of Intel 440BX PCIset, BX3 is able to

provide two host bus frequencies -- either 66 or 100MHz for Slot1 processor and

memory operating. The default is set at 100MHz once Pentium®II processor to

be mounted onto this motherboard. However, no matter what kind of Slot1 proces-

soryouinstalled,itshouldcomewithrightmemorymodulesfornormalandstable

operation. For example, if you install a Pentium®III processor, you should use

the SDRAM module with 100MHz based(or above) to match the CPU speed.

Furthermore,one thingyou mayneed tobear inmind, beforethe CPUinstallation, it

is anyway our advice to use JP3 and set up right speed of Slot1 processor at any

time.

Note 1: AUTO : CPU Bus Clock Selection by CPU for Pentium®II/III Processor is 100MHz and the other is 66MHz

* : RSD (Reserved)

** : ESDJ (Easy-Setting-Dual-Jumper)

CPU Selection

Bus Clock

Multiplier 66MHz 100MHz 110MHz 124MHz 133MHz

3.5X 233MHz 350MHz 385MHz* 434MHz* 466MHz*

4X 266MHz 400MHz 440MHz* 496MHz* 533MHz*

4.5X 300MHz 450MHz 495MHz* 558MHz* 600MHz*

5X 333MHz 500MHz 550MHz* 620MHz* *

5.5X 366MHz 550MHz 605MHz* * *

6X 400MHz* 600MHz* 660MHz* * *

6.5X * 650MHz* * * *

7X * 700MHz* * * *

AUTO Note 1

AGP Bus

Clock 66MHz 66MHz 73.3MHz* 82.6MHz* 89MHz*

PCI Bus

Clock 33MHz 33MHz 36.6MHz* 31MHz* 33.3MHz*

InstallationBX3

Page 6

System Memory Configuration

Memory Layout

The BX3 supports (3) 168-pin DIMMs (Dual In-line Memory Module). The

DIMMs can be either EDO (Extended Data Out) or SDRAM (Synchronized

DRAM). The DIMMs may be installed using just one chip.

•We recommend using SDRAM DIMM can not mixing

with EDO DIMM modules.

• The EDO DIMM only support pentium®II Processor at 66MHz, not

support Pentium III Processor at 100MHz.

• We recommend when installed the 100MHz Pentium III Processor

using DIMM SDRAM must be 125MHz (-8ns) bus speed. If used

100MHz (-10ns) SDRAM may be critical timing for the

motherboard.

• About the “PC/100 SDRAM spec.” information you may visit Intel’s

home page at:

http//developer.intel.com/design/pcisets/memory/index.htm

• DIMM SDRAM may be 83MHz (-12ns), 100MHz (-10ns) or

125MHz (-8ns) bus speed.

Figure 2 and Table 1 show several possible memory configurations using

DIMM 1 (M1)

DIMM 2 (M2)

DIMM 3 (M3)

Bank 0

Bank 1

Bank 2

-Synchronous

-SDRAM or EDO

DIMM

Figure 2

InstallationBX3

Page 7

Table 1

*SDRAM only supports 8, 16, 32, 64, 128MB DIMM modules. 256MB only

supports Registered Synchronouts DRAM Memory Modules.

* EDO only supports Pentium®II Processor at 66MHz, not supports Pentium III

Processor at 100MHz.

yromeMlatoT 1MMID )0knaB( 2MMID )1knaB( 3MMID )2knaB(

BM867= mumixaM

*MARDS/ODE ,BM23,BM61,BM8 BM652,BM821,BM46 1X

BM215= mumixaM

*MARDS/ODE ,BM23,BM61,BM8 BM652,BM821,BM46 1X

enoN

BM652= mumixaM

*MARDS/ODE ,BM23,BM61,BM8 BM652,BM821,BM46 1X

enoNenoN

InstallationBX3

Page 8

Power On/Off - This is connected to the power button on the case.

Using the Soft-Off by Pwr-BTTN feature, you can choose either

Instant Off (turns system off immediately), or 4 sec delay (you need to

hold the button down for 4 seconds before the system turns off). When

the system is in 4 sec delay mode, we has added a special feature to

make the system go into suspend mode when the button is pressed

momentarily.

Device Connectors (continued)

Speaker - Connect to the system's speaker for beeping

1. Speaker 3. GND

2. N/C 4. GND

Reset - Closed to restart system.

Turbo LED indicator - LED ON when higher speed is selected

IDE LED indicator - LED ON when Onboard PCI IDE Hard disks is

activate

KeyLock - Keyboard lock switch & Power LED connector

1. Power LED(+) 4. Keylock

2. N/C 5. GND

3. GND

J3 1

* The power LED lights when the

system is powered on and blinks in

SLEEP MODE (Suspend mode).

IR Connector

1. VCC 4. GND

2. NC 5. IRTX

3. IRRX

Tabla de contenidos

Otros manuales de Placa madre de EPOX

EPOX

EPOX EP-MVP4F Manual de usuario

EPOX

EPOX An Intel Socket 478 Processor Based Mainboard... Manual de usuario

EPOX

EPOX EP-3VBA Manual de usuario

EPOX

EPOX EP-LX370Y Manual de usuario

EPOX

EPOX ProNiX EP-9NPAJ Manual de usuario

EPOX

EPOX 8KTA Manual de usuario

EPOX

EPOX EP-5ATXA-M Manual de usuario

EPOX

EPOX 6XBA2 Manual de usuario

EPOX

EPOX BXB Manual de usuario

EPOX

EPOX EP-3VWM Manual de usuario

EPOX

EPOX EP-4PEAE 11 Manual de usuario

EPOX

EPOX F62 Manual de usuario

EPOX

EPOX EP-V370Y Manual de usuario

EPOX

EPOX S7-530A Manual de usuario

EPOX

EPOX MVP4M Manual de usuario

EPOX

EPOX AMD Socket et A Processor based AGP (8X)... Manual de usuario

EPOX

EPOX nVIDIA nForce3 250Gb Manual de usuario

EPOX

EPOX kl-133m Manual de usuario

EPOX

EPOX EP-3VBM+ Manual de usuario

EPOX

EPOX EP-BX6 Manual de usuario

EPOX

EPOX EP-5NVA+SLI Manual de usuario

EPOX

EPOX LX370Y Manual de usuario

EPOX

EPOX EP-3VB Manual de usuario

EPOX

EPOX 8U1697 GLI Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manual de usuario