EnGenius ECB1221R Manual de usuario

EnGenius Quick Start Guide ECB1221R Wireless Client Bridge

he ECB1221R Wireless Client Bridge operates seamlessly in the

2.4 GHz frequency spectrum supporting the 802.11b (2.4GHz,

11Mbps) and the newer, faster 802.11g (2.4GHz, 54Mbpswireless

standard. High output power and high sensitivity can extend range and

coverage to reduce the roaming between APs to get more stability

wireless connection. It also can reduce the expense of equipment in the

same environment. To protect your wireless connectivity, this device can

encrypt all wireless transmissions through 64/128-bit WEP data

encryption and also supports WPA2/WPA/802.1x for powerful security

authentication. The MAC addresses filter let you select exactly which

stations should have access to your network.

Top Panel

Real Panel

Label Description

LAN Ports (1 – 4) Use an Ethernet cable to connect each port to a computer on your Local

Area Network (LAN).

WAN Port Use an Ethernet cable to connect this port to your WAN router.

DC Connector Use the power cable and connect the adapter to the power socket on the

wall, and the DC inlet into the DC connector.

Antenna Connector Connect the omni-directional antenna to the SMA connector.

Connection / Activity

LED This LED will light up once an Ethernet cable is connected to one of the

LAN ports.

WAN LED This LED will light up once an Ethernet cable is connected to WAN

(Internet) port.

WLAN LED This LED will light up once the RF (wireless LAN) feature is enabled

Power LED This LED will light up once the power cable is connected to the DC

connector.

Quick Start Guide v.1.0 ECB1221R Wireless Client Bridge 1

Please refer to the User’s Manual in the CD-ROM for complete instructions.

EnGenius Quick Start Guide ECB1221R Wireless Client Bridge

IP Address Configuration

The default IP address of the device is 192.168.1.1 In order to log into this device, you must first configure the

TCP/IP settings of your PC/Notebook.

1. In the control panel, double click Network

Connections and then double click on the

connection of your Network Interface Card (NIC).

You will then see the following screen.

2. Select Internet Protocol (TCP/IP) and then click

on the Properties button. This will allow you to

configure the TCP/IP settings of your

PC/Notebook.

3. Select Use the following IP Address radio

button and then enter the IP address

(192.168.1.10) and subnet mask

(255.255.255.0). Ensure that the IP address and

subnet mask are on the same subnet as the

device.

4. Click on the OK button to close this window, and

once again to close LAN properties window.

Logging In

1. To configure the device through the web-browser,

enter the IP address of the device (192.168.1.1) into

the address bar of the web-browser and press Enter.

2. After connecting to the IP address, the web-browser

will display the login page. Specify admin for both the

User Name and Password and then click on the

3. Once you have logged in, you man configure the

WAN, LAN and Wireless settings. Please refer to the

user’s manual in the CD-ROM to configure these

parameters.

Quick Start Guide v.1.0 ECB1221R Wireless Client Bridge 2

Please refer to the User’s Manual in the CD-ROM for complete instructions.

Otros manuales para ECB1221R

Tabla de contenidos

Otros manuales de Punto de acceso inalámbrico de EnGenius

EnGenius

EnGenius EOA7530 Manual de usuario

EnGenius

EnGenius EOC1650 Manual de usuario

EnGenius

EnGenius ENH500 Manual de usuario

EnGenius

EnGenius ENH200 Manual de usuario

EnGenius

EnGenius ENS500-AC Manual de usuario

EnGenius

EnGenius EOC1650 Manual de usuario

EnGenius

EnGenius EAP300 Manual de usuario

EnGenius

EnGenius EWS500AP Manual de usuario

EnGenius

EnGenius EOC-3220 Manual de usuario

EnGenius

EnGenius Neutron EWS320AP Manual de usuario

EnGenius

EnGenius EWS330AP Manual de usuario

EnGenius

EnGenius EWS377-FIT Manual de usuario

EnGenius

EnGenius ENH500 Guía de configuración

EnGenius

EnGenius EOC1650 Manual de usuario

EnGenius

EnGenius EWS510AP Manual de usuario

EnGenius

EnGenius ETA1305 Manual de usuario

EnGenius

EnGenius M5000 Manual de usuario

EnGenius

EnGenius ENH200EXT Manual de usuario

EnGenius

EnGenius EWS850-FIT Manual de usuario

EnGenius

EnGenius EOA7535 Manual de usuario

EnGenius

EnGenius ECB9500 Manual de usuario

EnGenius

EnGenius EOC-2610 Manual de usuario

EnGenius

EnGenius EOC-3610s-EXT Manual de usuario

EnGenius

EnGenius ETR9350 Manual de usuario

Manuales populares de Punto de acceso inalámbrico de otras marcas

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manual de usuario

Ubiquiti

Ubiquiti NanoStation NSM2 Manual de usuario

Cisco

Cisco Aironet 1550 Series Manual de usuario

Aruba

Aruba IAP-335 Manual de usuario

Advantek Networks

Advantek Networks AWN-AP-54MR Manual de usuario

IP-COM

IP-COM AP355 Manual de usuario

Buffalo

Buffalo AirStation WLA-L11G Manual de usuario

D-Link

D-Link DAP-3662 Manual de usuario

xG Technology

xG Technology xMax CN1300 Manual de usuario

Widelink

Widelink ezWave WAP-1100 Series Manual de usuario

Edimax

Edimax CAP1200 Manual de usuario

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manual de usuario

Aruba

Aruba AP-203R Manual de usuario

LuXout Shades

LuXout Shades LUXSHADE MOTION Manual de usuario

CreatComm

CreatComm TB5F Manual de usuario

SineDigital

SineDigital MW-1500AP(H) Manual de usuario

TP-Link

TP-Link AP9650 V1 Manual de usuario

Draytek

Draytek VIGORAP 902 Manual de usuario