Eneo VMC-19LEDM Manual de usuario
QUICK MANUAL
17.0"/19.0" TFT LCD MONITOR
Installation and Operating Instructions
VMC-17LEDM
VMC-19LEDM
KEY BUTTON
SHORT KEY FUNCTION
OSD KeyFunction
Activates and exit the OSD
Select input source, and select the OSD menu
Move the OSD menu and auto adjustment of RGB source
Decrease the level of volume and move the previous menu
Increase the level of volume and select rhe OSD menu
Turns the power ON or OFF. There will be a few seconds
delay before the display appears. The power LED (next to the
power switch) lights with green when the power is turned ON.
The power is turned off by pressing the power switch again
and the power LED goes red.
CONNECTION
2345678
1
1
For FW Update
VIDEO-2 IN / OUT
VIDEO-2 signal input / looping out
DC12V
DC adapter input
4
2
Stereo audio input for VGA
VIDEO-1 IN / OUT
VIDEO-1 signal input / looping out
AUDIO (VIDEO)
Stereo audio input for VIDEO or S-VIDEO
6
8
5
3
7
AUDIO (PC)
HDMI
HDMI signal input
VGA
VGA (PC RGB) signal input
INPUT SELECT
VOLUME MENU
Inputs can be set to AV1, AV2, S-VIDEO, HDMI and PC mode.
AV1
AV2
SVIDEO
HDMI
PC
1. Press the SOURCE button and then ▲/▼ Button
to move the source
2. Press the ►button to select the source
3. Press the MENU/EXIT Button to exit the INPUT menu.
Press the ◄ / ►button for adjusting the volume up and down.
Volume
50
PICTURE MENU
PC Mode only
1. Press the MENU/EXIT Button and then ◄ / ► Button to select the PICTURE menu.
2. Press the ▲or ▼ Button and then button to select the Button to select the adjustment
item you need.
3. Press the ◄ or ►Button to active the item.
6. Press the MENU/EXIT button to move to the previous menu.
AV1/2, S-VIDEO & HDMI Mode
PICTURE
Contrast
Brightness
Tint
Color
Sharpness
Color Tone
Scale
Picture Mode
57
50
50
55
51
Normal
Full
Standard
Ex) if you select the BRIGHTNESS, then the below picture appears on the bottom screen.
Brightness
80
PICTURE
Contrast
Brightness
Color Tone
Auto
Color Auto
50
50
4. ‘Auto’ function is adjusting the location of screen by receiving the sync signal from PC.
5. ‘Color Auto’ is adjusting the optimum color coordination automatically.
Ex) Resolution change
SYSTEM MENU
1. Press the MENU/EXIT Button and then ◄ / ► Button to select the SYSTEM menu.
2. Press the ▲ or ▼ Button and then button to select the Button to select the
adjustment item you need.
3. Press the ◄ or ►Button to active the item.
4. ‘Key Lock’ function is adjust the button lock option.
5. ‘Duration’ function is adjust the time to display OSD menu.
6. ‘Halftone’ function is adjust the transparency of the OSD menu.
7. ‘DPMS’ function is adjust the time to turn power off during no input signal.
8. ‘No Operation’ function is adjust the time to turn power off during no input key button.
SYSTEM
50
50
15
100
Key Lock
Language
H-Position
V-Position
Duration
Halftone
DPMS
No Operation
Reset
OFF
English
OFF
OFF
Release the lock - Press KEY LOCK button on the remote controller.
- Press & button on the key pad.
FUNCTION MENU
PC Mode only
1. Press the MENU/EXIT Button and then ◄ / ► Button to select the FUNCTION menu.
2. Press the ▲or ▼ Button and then button to select the Button to select the adjustment
item you need.
3. Press the ◄ or ►Button to active the item.
4. Press the MENU/EXIT button to move to the previous menu.
FUNCTION
50
50
100
100
H-Position
V-Position
Clock
Phase
Technical changes reserved.
© Copyright by VIDEOR E. Hartig GmbH 11/2017
eneo
®
is a registered trademark of VIDEOR E. Hartig GmbH
Exclusive distribution through specialised trade channels only.
VIDEOR E. Hartig GmbH
Carl-Zeiss-Straße 8 • 63322 Rödermark, Germany
Tel. +49 (0) 6074 / 888-0 • Fax +49 (0) 6074 / 888-100
www.videor.com
www.eneo-security.com
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Monitor de Eneo
Eneo
Eneo VM-FHD10M Manual de usuario
Eneo
Eneo VMC-5.6/1-LCD Manual de usuario
Eneo
Eneo VM-FHD10M Manual de usuario
Eneo
Eneo VMC-8LCD-CP01 Guía del usuario
Eneo
Eneo VM-FHD24PFA Manual de usuario
Eneo
Eneo VMC-27LEDM Manual de usuario
Eneo
Eneo VMC-19LEDMD Manual de usuario
Eneo
Eneo VM-4K M Series Manual de usuario
Eneo
Eneo VM-FHD24 Manual de usuario
Eneo
Eneo VM-4K40M Manual de usuario
Eneo
Eneo VM-UHD32M Manual de usuario
Eneo
Eneo VM-UHD28M Manual de usuario
Eneo
Eneo VTD-1 Manual de usuario
Eneo
Eneo VMC-8LCD-CM01 Manual de usuario
Eneo
Eneo VM-FHD27MPA Manual de usuario
Eneo
Eneo VMC-22LED Manual de usuario
Eneo
Eneo VMC-10/2 Manual de usuario
Eneo
Eneo PCS-19/DVR-08 Manual de usuario
Eneo
Eneo VMC-8LCD-CP01B Manual de usuario
Eneo
Eneo VMC-26LCD-PW1 Manual de usuario
