Emerson Rosemount 3408 Manual de usuario

Quick Start Guide

00825-0300-4418, Rev AB

May2023

Rosemount™ 3408 Level Transmitter

LCD Display Kit

1 About this guide

This guide provides instructions for retrofitting and replacing the

LCD display on the Rosemount 3408 Level Transmitter. Refer to the

Rosemount 3408 Reference Manual for instructions on how to set up

the LCD display.

1.1 Safety messages

WARNING

Failure to follow safe installation and servicing guidelines could

result in death or serious injury.

Ensure the transmitter is installed by qualified personnel and in

accordance with applicable code of practice.

For installations in hazardous locations, the transmitter must be

installed according to the Rosemount 3408 Product Certifications

document and System Control Drawing.

WARNING

Explosions could result in death or serious injury.

Before connecting a handheld communicator in an explosive

atmosphere, ensure that the instruments are installed in accordance

with intrinsically safe or non-incendive field wiring practices.

In Explosion-proof/Flameproof and Non-Incendive/Type Ex ec

installations, do not remove the transmitter cover when power is

applied to the unit.

The transmitter cover must be fully engaged to meet Explosion-

proof/Flameproof requirements.

WARNING

Electrical shock could cause death or serious injury.

Ensure the mains power to the transmitter is off and the lines to any

other external power source are disconnected or not powered while

wiring the transmitter.

Quick Start Guide May2023

2 Emerson.com/Rosemount

WARNING

Process leaks could result in death or serious injury.

Ensure that the transmitter is handled carefully. If the process seal is

damaged, gas might escape from the tank.

WARNING

Physical access

Unauthorized personnel may potentially cause significant damage to

and/or misconfiguration of end users’ equipment. This could be

intentional or unintentional and needs to be protected against.

Physical security is an important part of any security program and

fundamental in protecting your system. Restrict physical access by

unauthorized personnel to protect end users’ assets. This is true for

all systems used within the facility.

CAUTION

Hot surfaces

The flange and process seal may be hot at high process

temperatures. Allow to cool before servicing.

1.2 Product recycling/disposal

Recycling of equipment and packaging should be taken into

consideration and disposed of in accordance with local and national

legislation or regulations.

May2023 Quick Start Guide

Quick Start Guide 3

1.3 Spare part numbers

Figure 1-1: LCD Display

A B

A. Graphical LCD display

B. Display cover

Table 1-1: Spare Parts Kits

Part number Description

03408-5000-0001 Graphical LCD (without cover)

03408-5000-0002 Graphical LCD with Bluetooth® connectivity (without

cover)

03408-5000-0003 Graphical LCD upgrade kit (with display cover)

03408-5000-0004 Graphical LCD with Bluetooth connectivity (with display

cover)

1.4 Bluetooth® UID and key

You can find the UID and key on the display unit and on the attached

paper tag.

Figure 1-2: Bluetooth Security Information

Quick Start Guide May2023

4 Emerson.com/Rosemount

2 Install the new LCD display

Prerequisites

Make sure that the device is not exposed to moisture or dust.

Procedure

1. Disconnect the power supply.

2. Turn the jam screw clockwise until it is completely threaded

into the housing.

H2.5 mm

3. Remove the cover.

4. Remove the old LCD display (if fitted).

May2023 Quick Start Guide

Quick Start Guide 5

5. Snap the LCD display into place.

6. Attach and tighten the cover.

a) Verify the cover jam screw is completely threaded into

the housing.

H2.5 mm

b) Attach and tighten the cover.

Note

Make sure the cover is fully engaged. There should be

no gap between the cover and the housing.

Quick Start Guide May2023

6 Emerson.com/Rosemount

c) Turn the jam screw counterclockwise until it contacts

the cover.

Note

Required for explosion-proof/flameproof installations

only.

H2.5 mm

d) Turn the jam screw an additional ½ turn

counterclockwise to secure the cover.

7. Connect the power supply.

May2023 Quick Start Guide

Quick Start Guide 7

3 Affix the radio certification sticker

Prerequisites

This only applies when upgrading to an LCD display with Bluetooth®

connectivity.

Procedure

1. Check the FCC ID and IC numbers on the main label.

2. Pick the sticker with the same FCC ID and IC numbers, but with

an additional "B" at the end.

3. Affix the sticker on the main label over the original FCC ID, IC,

and HVIN numbers.

Quick Start Guide May2023

8 Emerson.com/Rosemount

May2023 Quick Start Guide

Quick Start Guide 9

Quick Start Guide May2023

10 Emerson.com/Rosemount

Otros manuales para Rosemount 3408

Tabla de contenidos

Otros manuales de Transmisor de Emerson

Emerson

Emerson Rosemount 3051S Series Manual de instrucciones

Emerson

Emerson Micro Motion 2400S Manual de usuario

Emerson

Emerson Rosemount 3051S Series Guía de configuración

Emerson

Emerson Rosemount 5408 Manual de usuario

Emerson

Emerson Rosemount 3144P Manual de usuario

Emerson

Emerson Rosemount 3051G Manual de usuario

Emerson

Emerson Micro Motion Manual de usuario

Emerson

Emerson Rosemount 708 Manual de usuario

Emerson

Emerson Rosemount 848T Manual de usuario

Emerson

Emerson Rosemount 3051P Manual de usuario

Emerson

Emerson Rosemount 708 Manual de usuario

Emerson

Emerson Rosemount FCL-01 Manual de usuario

Emerson

Emerson Rosemount FCL-01 Manual de usuario

Emerson

Emerson Micro Motion 5700 Manual de usuario

Emerson

Emerson Rosemount 2051 Manual de usuario

Emerson

Emerson Rosemount 3051SF Series Manual de usuario

Emerson

Emerson Rosemount 326P Manual de usuario

Emerson

Emerson Rosemount Ultrasonic 3107 Manual de usuario

Emerson

Emerson Rosemount 2088 Manual de usuario

Emerson

Emerson Micro Motion 5700 Guía rápida

Emerson

Emerson MICRO MOTION 2700 Guía rápida

Emerson

Emerson Rosemount 2051 Wireless Series Manual de usuario

Emerson

Emerson PT5N FLR Series Manual de usuario

Emerson

Emerson Rosemount Oxymitter 4000 Manual de usuario

Manuales populares de Transmisor de otras marcas

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manual del propietario

Honeywell

Honeywell 5816WMBR Manual de usuario

Kamstrup

Kamstrup READy MTU Instrucciones de funcionamiento

Omega

Omega ZW Series Manual de usuario

ABB

ABB Field 264H Guía

Alinco

Alinco DJ-V17T Manual de usuario

Dejero

Dejero EnGo 3x Manual de usuario

Rosemount

Rosemount 4600 Manual de usuario

Speaka Professional

Speaka Professional 2342740 Manual de usuario

trubomat

trubomat GAB 1000 Manual de usuario

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manual de usuario

Rondish

Rondish UT-11 Manual de usuario

MG 10JRE Manual de usuario

Burkert

Burkert 8177 Manual de usuario

Firetide

Firetide HotPort 3203 Manual

Tele Radio

Tele Radio T9-02 Manual de usuario

Rotronic

Rotronic HygroFlex HF3 Series Manual de usuario

Jamara

Jamara FCX6 Pro Tel Manual de usuario