Elsner elektronik KNX S1R-B4 compact Guía

Installation and Adjustment

KNX S1R-B4 compact

Multifunctional Actuator

Item number 70550

1 Contents

Elsner Elektronik GmbH • Sohlengrund 16 • 75395 Ostelsheim • Germany

Actuator KNX S1R-B4 compact • from application 1.0

Status: 12.09.2022 • Subject to technical changes. Errors excepted.

1. Safety and usage instructions ............................................................. 3

1.1. Safety notice for automatic functions .................................................................... 3

2. Description ........................................................................................... 4

3. Commissioning .................................................................................... 4

3.1. Addressing of the device at the bus ....................................................................... 5

3.2. Monitor safety functions .......................................................................................... 5

4. Transfer protocol ................................................................................. 6

4.1. List of all communication objects ........................................................................... 6

5. Parameter setting .............................................................................. 14

5.1. General settings ..................................................................................................... 14

5.2. Output ..................................................................................................................... 14

5.2.1. Channel settings – drives ........................................................................... 15

5.2.1.1. Control (drives) ............................................................................ 17

5.2.1.2. Manual ........................................................................................... 25

5.2.1.3. Automation - external .................................................................. 25

5.2.1.4. Automatic - internal for shading (drives) .................................... 26

5.2.1.5. Automatic for windows (drives) .................................................. 31

5.2.1.6. Scenes (drives) .............................................................................. 35

5.2.1.7. Button inputs (drives) ................................................................... 35

5.2.2. Connection option for zero position sensors ........................................... 42

5.2.3. Channel settings – switch functions .......................................................... 44

5.2.3.1. Connection (switch functions) ..................................................... 45

5.2.3.2. On/Off switch delays, time switching (switch functions) .......... 45

5.2.3.3. Blocking function (switch functions) ........................................... 46

5.2.3.4. Button input (switch functions) ................................................... 46

2 Clarification of signs

This manual is amended periodically and will be brought into line with new software

releases. The change status (software version and date) can be found in the contents footer.

If you have a device with a later software version, please check

www.elsner-elektronik.de in the menu area "Service" to find out whether a more up-to-

date version of the manual is available.

Clarification of signs used in this manual

Safety advice.

Safety advice for working on electrical connections, components,

etc.

DANGER! ... indicates an immediately hazardous situation which will lead to

death or severe injuries if it is not avoided.

WARNING! ... indicates a potentially hazardous situation which may lead to

death or severe injuries if it is not avoided.

CAUTION! ... indicates a potentially hazardous situation which may lead to

trivial or minor injuries if it is not avoided.

ATTENTION! ... indicates a situation which may lead to damage to property if it is

not avoided.

ETS In the ETS tables, the parameter default settings are marked by

underlining.

3 Safety and usage instructions

Actuator KNX S1R-B4 compact • Version: 12.09.2022 • Technical changes and errors excepted.

1. Safety and usage instructions

Installation, testing, operational start-up and troubleshooting should

only be performed by an authorised electrician.

DANGER!

Risk to life from live voltage (mains voltage)!

There are unprotected live components inside the device.

• Inspect the device for damage before installation. Only put undamaged

devices into operation.

• Comply with the locally applicable directives, regulations and provisions for

electrical installation.

• Immediately take the device or system out of service and secure it against

unintentional switch-on if risk-free operation is no longer guaranteed.

Use the device exclusively for building automation and observe the operating instruc-

tions. Improper use, modifications to the device or failure to observe the operating in-

structions will invalidate any warranty or guarantee claims.

Operate the device only as a fixed-site installation, i.e. only in assembled condition and

after conclusion of all installation and operational start-up tasks, and only in the sur-

roundings designated for it.

Elsner Elektronik is not liable for any changes in norms and standards which may occur

after publication of these operating instructions.

1.1. Safety notice for automatic functions

WARNING!

Risk of injury from automatically moving components!

Parts of the system can be started by the automatic controls

and be a danger to persons.

• No persons may remain in the travelling range of parts

driven by an electric motor.

• Adhere to the relevant building regulations.

• Ensure that the return path/access to the building is not blocked

if spending time outside the building (danger of being locked out).

• Correctly decommission the system for maintenance and

cleaning work.

If there is a power outage, the system does not work. Therefore, shadings should be

moved to a save position if there are anticipated weather conditions, for example, if

this has not already been done by the automatic function (product protection).

If the power supply is removed, the connected drive switches off. When the power is

restored, the consumer remains switched off until a new movement command is re-

ceived by the actuator.

4 Description

Actuator KNX S1R-B4 compact • Version: 12.09.2022 • Technical changes and errors excepted.

For information on installation, maintenance, disposal, scope of

delivery and technical data, please refer to the installation

instructions.

2. Description

The Actuator KNX S1R-B4 compact with integrated façade control has got a mul-

tifunctional output which can connect to either a drive with Up/Down control (blind,

awning, shutter, window) or two switchable devices (On/Off for light and ventilation).

Because the output is designed to be free of potential, other systems can also be con-

trolled, e.g. via the manual switch input on a motor control unit.

Automation can be specified externally or internally. Internally, there are numerous op-

tions available for blocking, locking (e.g. master-slave) and priority definitions (e.g.

manual-automatic). Scenes can be saved and called up via the bus (scene control with

16 scenes).

4 digital inputs are available for the connection of contacts like push-buttons.

Functions:

• Free of potential multifunctional output for a 230 V drive (shading,

window) or connection of two switchable devices (light, fan)

•4 binary inputs

•Position feedback (movement position, also slat position for shutters)

•Position storage (movement position) via 1-bit object (storage and call-up

e.g. via buttons)

• Parameters for taking drive and mechanics downtimes into account

• Control via internal or external automation functions

•Integratedshade control with slat adjustment for shutters based on the

position of the sun

•Scene control for movement position with 16 scenes (also slat position for

shutters)

• Mutual locking of two drives using zero position sensors prevents collisions

e.g. of shade and window (master–slave)

•Blocking objects and alarm reports have different priorities, so safety

functions always take precedence (e.g. wind block)

• Manual or automatic priority setting via time or communication object

•Brief time limit (movement command blocked) and 2 movement limits

3. Commissioning

Configuration is made using the KNX software as of ETS 5. The product file can be

downloaded from the ETS online catalogue and the Elsner Elektronik website on

www.elsner-elektronik.de in the “Service” menu.

After the bus voltage has been applied, the device will enter an initialisation phase last-

ing approx. 5 seconds. During this phase no information can be received or sent via the

bus.

5 Commissioning

Actuator KNX S1R-B4 compact • Version: 12.09.2022 • Technical changes and errors excepted.

3.1. Addressing of the device at the bus

The equipment is delivered with the individual address 15.15.255. This can be changed

via the ETS. A button and a control LED are located on the unit for this purpose.

3.2. Monitor safety functions

For KNX devices with safety functions (e.g. wind or rain block), periodical monitoring

of the safety objects must be set up.

For further explanations of KNX integration, see the manual chapters

Transfer protocol and Setting the parameters.

6 Transfer protocol

Actuator KNX S1R-B4 compact • Version: 12.09.2022 • from application 1.0 • Technical changes and errors excepted.

4. Transfer protocol

4.1. List of all communication objects

Abbreviations:

R Read

WWrite

C Communication

T Transmit

DPT Data Point Type

No Text Function Flags DPT type Size

0 Software version readable R-C- [217.1]

DPT_Version

2 Bytes

1 Channel A - Automatic or

manual status

Output R-CT [1.1] DPT_Switch 1 Bit

2 Channel A - Manual

extended

Input RWC- [1.8] DPT_UpDown 1 Bit

3 Channel A - Manual short

time

Input RWC- [1.8] DPT_UpDown 1 Bit

4 Channel A - Manual

movement position

Input RWC- [5.1] DPT_Scaling 1 Byte

5 Channel A - Manual blind

position

Input RWC- [5.1] DPT_Scaling 1 Byte

6 Channel A - Automatic

extended

Input RWC- [1.8] DPT_UpDown 1 Bit

7 Channel A - Automatic short

time

Input RWC- [1.8] DPT_UpDown 1 Bit

8 Channel A - Automatic

movement position

Input RWC- [5.1] DPT_Scaling 1 Byte

9 Channel A - Automatic blind

position

Input RWC- [5.1] DPT_Scaling 1 Byte

10 Channel A - Switch from

manual to automatic

Input RWC- [1.1] DPT_Switch 1 Bit

11 Channel A - Automatic

blocking object

Input RWC- [1.1] DPT_Switch 1 Bit

12 Channel A - Current

movement position

Output R-CT [5.1] DPT_Scaling 1 Byte

13 Channel A - Current blind

position

Output R-CT [5.1] DPT_Scaling 1 Byte

14 Channel A - Status object Output R-CT [1.1] DPT_Switch 1 Bit

15 Channel A - Manually move

to position memory

Input RWC- [1.1] DPT_Switch 1 Bit

7 Transfer protocol

Actuator KNX S1R-B4 compact • Version: 12.09.2022 • from application 1.0 • Technical changes and errors excepted.

16 Channel A - Learn object

position memory manually

Input RWC- [1.1] DPT_Switch 1 Bit

17 Channel A - Learn object

position memory manually

Input RWC- [1.1] DPT_Switch 1 Bit

18 Channel A - Automatically

move to position memory

Input RWC- [1.1] DPT_Switch 1 Bit

19 Channel A - Learn object

position memory

automatically 0

Input RWC- [1.1] DPT_Switch 1 Bit

20 Channel A - Learn object

position memory

automatically 1

Input RWC- [1.1] DPT_Switch 1 Bit

21 Channel A - Call up / saving

scenes

Input RWC- [18.1]

DPT_SceneControl

1 Byte

22 Channel A - Outdoor

temperature blocking object

Input RWC- [1.1] DPT_Switch 1 Bit

23 Channel A - Outdoor

temperature block

measurement

Input RWC- [9.1]

DPT_Value_Temp

2 Bytes

24 Channel A - Outdoor

temperature blocking status

Output R-CT [1.1] DPT_Switch 1 Bit

25 Channel A - Twilight object Input RWC- [1.1] DPT_Switch 1 Bit

26 Channel A - Twilight

measurement

Input RWC- [9.4]

DPT_Value_Lux

2 Bytes

27 Channel A - Twilight status Output R-CT [1.1] DPT_Switch 1 Bit

28 Channel A - Time control Input RWC- [1.1] DPT_Switch 1 Bit

29 Channel A - Inside

temperature release object

Input RWC- [1.1] DPT_Switch 1 Bit

30 Channel A - Inside

temperature release

measurement

Input RWC- [9.1]

DPT_Value_Temp

2 Bytes

31 Channel A - Inside

temperature release

setpoint

Input RWC- [9.1]

DPT_Value_Temp

2 Bytes

32 Channel A - Inside

temperature release status

Output R-CT [1.1] DPT_Switch 1 Bit

33 Channel A - Shading object Input RWC- [1.1] DPT_Switch 1 Bit

34 Channel A - Shading

brightness measurement 1

Input RWC- [9.4]

DPT_Value_Lux

2 Bytes

35 Channel A - Shading

brightness measurement 2

Input RWC- [9.4]

DPT_Value_Lux

2 Bytes

36 Channel A - Shading

brightness measurement 3

Input RWC- [9.4]

DPT_Value_Lux

2 Bytes

No Text Function Flags DPT type Size

8 Transfer protocol

Actuator KNX S1R-B4 compact • Version: 12.09.2022 • from application 1.0 • Technical changes and errors excepted.

37 Channel A - Shading

threshold value

Input /

Output

RWCT [9.4]

DPT_Value_Lux

2 Bytes

38 Channel A - Shading

threshold value 1 = + | 0 = -

Input RWC- [1.1] DPT_Switch 1 Bit

39 Channel A - Shading

threshold value +

Input RWC- [1.1] DPT_Switch 1 Bit

40 Channel A - Shading

threshold value -

Input RWC- [1.1] DPT_Switch 1 Bit

41 Channel A - Shading status Output R-CT [1.1] DPT_Switch 1 Bit

42 Channel A - Shading

position learning object

Input RWC- [1.1] DPT_Switch 1 Bit

43 Channel A - Azimuth Input RWC- [9.7] DPT_Value_

Humidity

2 Bytes

44 Channel A - Elevation Input RWC- [9.7] DPT_Value_

Humidity

2 Bytes

45 Channel A - Cold air intake

blocking object

Input RWC- [1.1] DPT_Switch 1 Bit

46 Channel A - Cold air intake

outside temp. measurement

value

Input RWC- [9.1]

DPT_Value_Temp

2 Bytes

47 Channel A - Cold air intake

blocking status

Output R-CT [1.1] DPT_Switch 1 Bit

48 Channel A - Forced

ventilation

Input RWC- [1.1] DPT_Switch 1 Bit

49 Channel A - Warm air intake

blocking object

Input RWC- [1.1] DPT_Switch 1 Bit

50 Channel A - Warm air intake

inside temp. measurement

value

Input RWC- [9.1]

DPT_Value_Temp

2 Bytes

51 Channel A - Warm air intake

outside temp. measurement

value

Input RWC- [9.1]

DPT_Value_Temp

2 Bytes

52 Channel A - Warm air intake

blocking target value

Input RWC- [9.1]

DPT_Value_Temp

2 Bytes

53 Channel A - Warm air intake

blocking status

Output R-CT [1.1] DPT_Switch 1 Bit

54 Channel A - Inside

temperature opening object

Input RWC- [1.1] DPT_Switch 1 Bit

55 Channel A - Inside

temperature opening

measurement

Input RWC- [9.1]

DPT_Value_Temp

2 Bytes

56 Channel A - Inside

temperature opening

setpoint

Input RWC- [9.1]

DPT_Value_Temp

2 Bytes

No Text Function Flags DPT type Size

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Controladores de elsner elektronik

elsner elektronik

elsner elektronik KNX S-B4T-UP 230 V Manual de instrucciones

elsner elektronik

elsner elektronik KNX S1R-BA4-UP Guía

elsner elektronik

elsner elektronik KNX S2 Manual de usuario

elsner elektronik

elsner elektronik KNX R4 16 A Guía

elsner elektronik

elsner elektronik KNX eTR 205 Light Guía

elsner elektronik

elsner elektronik KNX K8 Guía

elsner elektronik

elsner elektronik KNX eTR MultiTouch Manual de usuario

elsner elektronik

elsner elektronik KNX R1-B4 compact 16 A Guía

elsner elektronik

elsner elektronik KNX Touch One Style Manual de usuario

elsner elektronik

elsner elektronik KNX S1R-B4-UP DES Guía

elsner elektronik

elsner elektronik KNX S1R-B4-UP DES Manual de usuario

elsner elektronik

elsner elektronik KNX RF-MSG-DST Guía

elsner elektronik

elsner elektronik KNX S-B2-UP 230 V Manual de instrucciones

elsner elektronik

elsner elektronik KNX K4 Manual de usuario

elsner elektronik

elsner elektronik Nunio KNX M-T Guía

elsner elektronik

elsner elektronik KNX RF-MSG-ST Manual de usuario

elsner elektronik

elsner elektronik KNX S4-B12 DES Manual de usuario

elsner elektronik

elsner elektronik 70711 Manual de usuario

elsner elektronik

elsner elektronik RF-MSG2-DST Manual de usuario

elsner elektronik

elsner elektronik KNX RF-MSG2-DST Manual de usuario

elsner elektronik

elsner elektronik KNX DALI L4 bc 16 A Guía

elsner elektronik

elsner elektronik KNX S4-B10 230 V Manual de usuario

elsner elektronik

elsner elektronik Cala Touch KNX Manual de usuario

elsner elektronik

elsner elektronik KNX RF S1R-B2 compact Guía

Manuales populares de Controladores de otras marcas

Digiplex

Digiplex DGP-848 Instrucciones de funcionamiento

YASKAWA

YASKAWA SGM series Manual de usuario

Sinope

Sinope Calypso RM3500ZB Manual de usuario

Isimet

Isimet DLA Series Style 2 Manual de instalación

LSIS

LSIS sv-ip5a Manual de usuario

Rockwell Automation

Rockwell Automation 1769-L31 Manual de usuario

Airflow

Airflow Uno hab Manual de usuario

ABB

ABB ACS580-01 drives Manual de usuario

Panasonic

Panasonic GM1 Series Manual de usuario

Emerson

Emerson SW93 Manual de usuario

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manual de usuario

Panasonic

Panasonic FP? Positioning Unit RTEX Manual de usuario

Samson

Samson Type 5824 Manual de servicio

Alpha IP

Alpha IP MIOB 21001 Manual de usuario

Siemens

Siemens OpenAir GMA 1 Series Manual de usuario

Surecom

Surecom SR-629 Manual de usuario

Fishman

Fishman TriplePlay Manual de usuario

Regulus

Regulus SRS1 T Manual de usuario

elsner elektronik KNX S1R-B4 compact Guía

Manuales populares de Controladores de otras marcas