Elsner elektronik KNX S-B2-UP 230 V Manual de instrucciones

Actuators

KNX S-B2-UP 230 V and

KNX S-B2-UP 24 V

Technical Data

and Installation Notes

Elsner Elektronik GmbH Steuerungs- und Automatisierungstechnik

Herdweg 7 • D-75391 Gechingen • Germany

Phone: +49 (0) 70 56/93 97-0 • Fax: +49 (0) 70 56/93 97-20

[email protected] • www.elsner-elektronik.de

Actuator KNX S-B2-UP • Date of issue: 02 July 2009 • Technical changes reserved. Errors reserved.

The Actuator KNX S-B2-UP controls shadings (blinds, awnings, roller shutters) or

windows. The automatic for this may be provided externally or internally. An internal

automatic offers numerous options for blocking, locking (e. g. master–slave) and priority

settings (e. g. manual–automatic). Scenes may be stored and recalled via the bus.

Two binary inputs may be used for direct operation (e. g. manual push-buttons) or as

bus inputs.

Functions:

•For drive mechanism of shading or window

•2 binary inputs

•8 channel scene control for operating position (for blinds also slat position)

•Slat tracking for blinds according to the position of the sun

•Position memory (operating position) with a 1 bit object (Storage and recall e. g.

with push-button)

•Position feedback (operating position, for blinds also slat position)

•Control by internal or external automatic

•Setting of the priority of manual or automatic control by time or via

communication object

•Mutual locking of two drives by means of zero position sensors avoids collisions

e. g. of shading and window (master–slave)

•Blocking objects and alarm messages have different priority so that safety

functions always are higher-ranking (e. g. wind blocking)

Configuration is accomplished by means of the KNX software ETS. The programme

file (format VD2) and the manual are ready for download on the Elsner Elektronik

website under www.elsner-elektronik.de in the menu "Service".

Technical Data

Housing: Plastic material

Colour: White

Mounting: In-wall (in socket Ø 60 mm, 60 mm deep)

Protection category: IP 20

Dimensions: approx. 50 x 51 x 41 (W x H x T, mm)

Weight: 230 V version: approx. 90 g

24 V version: approx. 70 g

Ambient temperature: Operation -20…+70°C, Storage -30…+85°C

Ambient air humidity: 5…80% R. H., avoid condensation

Operating voltage: Available for 230 V AC or for 24 V DC

Current: At the bus: 10 mA

At 24 V DC: 40 mA

At 230 V AC: 2 mA AC

Output: 1 x Drive mechanism

230 V version: max. 500 W, fused with microfuse T6.3 A

24 V version: max. 50 W

Actuator KNX S-B2-UP • Date of issue: 02 July 2009 • Technical changes reserved. Errors reserved. 3

Inputs: 2 x Binary input (for potential-free contacts)

Data output: KNX +/- bus terminal plug

BCU type: Own micro controller

PEI type: 0

Group addresses: max. 200

Allocations: max. 200

Communication objects: 88

The following standards have been considered for the evaluation of the product in

terms of electro magnetic compatibility:

Transient emissions:

•EN 60730-1:2000 Section EMV (23, 26, H23, H26) (threshold category: B)

•EN 50090-2-2:1996-11 + A1:2002-01 (threshold category: B)

•EN 61000-6-3:2001 (threshold category: B)

Interference resistance:

•EN 60730-1:2000 Section EMV (23, 26, H23, H26)

•EN 50090-2-2:1996-11 + A1:2002-01

•EN 61000-6-1:2004

The product has been tested for the above mentioned standards by an accredited EMV

laboratory.

Actuator KNX S-B2-UP • Date of issue: 02 July 2009 • Technical changes reserved. Errors reserved.

Structure of Actuator KNX S-B2-UP 230 V AC

Fig. 1: Front side of KNX S-B2-UP 230 V

1 Connecting plug terminal binary

inputs (only 1-4 from left active)

2 Programming LED

3 Programming key (PRG)

4 Inscription space

5 KNX plug terminal +/-

Fig. 2: Rear side of KNX S-B2-UP 230 V

1 Connecting plug terminal for

voltage supply and drive mechanism

2 Microfuse T6,3 A

Actuator KNX S-B2-UP • Date of issue: 02 July 2009 • Technical changes reserved. Errors reserved. 5

Structure of Actuator KNX S-B2-UP 24 V DC

Fig. 3: Front side of KNX S-B2-UP 24 V

1 Connecting plug terminal binary

inputs (only 1-4 from left active)

2 Programming LED

3 Programming key (PRG)

4 Inscription space

5 KNX plug terminal +/-

Fig. 4: Rear side of KNX S-B2-UP 24 V

1 Connecting plug terminal for

voltage supply and

drive mechanism

Actuator KNX S-B2-UP • Date of issue: 02 July 2009 • Technical changes reserved. Errors reserved.

Installation and Commissioning

Installation, inspection, commissioning and troubleshooting

of the actuators must only be carried out by a competent

electrician.

Disconnect all lines to be assembled, and take safety precautions against accidental

switch-on.

The actuators are exclusively intended for appropriate use. With each inappropriate

change or non-observance of the instructions for use, any warranty or guarantee claim

will be void.

After unpacking the device, check immediately for any mechanical damages. In case of

transport damage, this must immediately notified to the supplier.

If damaged, the actuators must not be put into

operation.

If an operation without risk may supposedly not be guaranteed, the device must be put

out of operation and be secured against accidental operation.

The actators must only be operated as stationary system, i.e. only in a fitted state and

after completion of all installation and start-up works, and only in the environment

intended for this purpose.

Elsner Elektronik does not assume any liability for changes in standards after

publication of this instruction manual.

Connection

The actuators are installed in a flush-type socket. The connection is accomplished by a

KNX connection clamp at the KNX data bus. Furthermore, a voltage supply (230 V AC or

24 V DC, depending on the version) is necessary. The physical address is allocated by

the KNX software. For this purpose, the actuator is provided with a programming key

with control LED.

Notes on installation

Never expose actuators to water (rain) or dust. This might damage the electronic

system. A relative air humidity of 95% must not be exceeded. Avoid bedwewing.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Controladores de elsner elektronik

elsner elektronik

elsner elektronik KNX S1R-B4-UP DES Guía

elsner elektronik

elsner elektronik KNX eTR MultiTouch Manual de usuario

elsner elektronik

elsner elektronik Cala Touch KNX Manual de usuario

elsner elektronik

elsner elektronik KNX RF-MSG-ST Manual de usuario

elsner elektronik

elsner elektronik KNX K4 Manual de usuario

elsner elektronik

elsner elektronik KNX Touch One Style Manual de usuario

elsner elektronik

elsner elektronik KNX K8 Guía

elsner elektronik

elsner elektronik KNX R1-B4 compact 16 A Guía

elsner elektronik

elsner elektronik KNX S4-B10 230 V Manual de usuario

elsner elektronik

elsner elektronik KNX S2 Manual de usuario

elsner elektronik

elsner elektronik KNX RF-MSG2-DST Manual de usuario

elsner elektronik

elsner elektronik KNX RF-MSG-DST Guía

elsner elektronik

elsner elektronik KNX RF S1R-B2 compact Guía

elsner elektronik

elsner elektronik RF-MSG2-DST Manual de usuario

elsner elektronik

elsner elektronik 70711 Manual de usuario

elsner elektronik

elsner elektronik KNX DALI L4 bc 16 A Guía

elsner elektronik

elsner elektronik KNX S4-B12 DES Manual de usuario

elsner elektronik

elsner elektronik KNX S1R-B4-UP DES Manual de usuario

elsner elektronik

elsner elektronik KNX eTR 205 Light Guía

elsner elektronik

elsner elektronik Nunio KNX M-T Guía

elsner elektronik

elsner elektronik KNX S1R-B4 compact Guía

elsner elektronik

elsner elektronik KNX R4 16 A Guía

elsner elektronik

elsner elektronik KNX S-B4T-UP 230 V Manual de instrucciones

elsner elektronik

elsner elektronik KNX S1R-BA4-UP Guía

Manuales populares de Controladores de otras marcas

Digiplex

Digiplex DGP-848 Instrucciones de funcionamiento

YASKAWA

YASKAWA SGM series Manual de usuario

Sinope

Sinope Calypso RM3500ZB Manual de usuario

Isimet

Isimet DLA Series Style 2 Manual de instalación

LSIS

LSIS sv-ip5a Manual de usuario

Rockwell Automation

Rockwell Automation 1769-L31 Manual de usuario

Airflow

Airflow Uno hab Manual de usuario

ABB

ABB ACS580-01 drives Manual de usuario

Panasonic

Panasonic GM1 Series Manual de usuario

Emerson

Emerson SW93 Manual de usuario

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manual de usuario

Panasonic

Panasonic FP? Positioning Unit RTEX Manual de usuario

Samson

Samson Type 5824 Manual de servicio

Alpha IP

Alpha IP MIOB 21001 Manual de usuario

Siemens

Siemens OpenAir GMA 1 Series Manual de usuario

Surecom

Surecom SR-629 Manual de usuario

Fishman

Fishman TriplePlay Manual de usuario

Regulus

Regulus SRS1 T Manual de usuario

elsner elektronik KNX S-B2-UP 230 V Manual de instrucciones

Manuales populares de Controladores de otras marcas