Elo TouchSystems ET1099L Manual de usuario

USER MANUAL

Elo Touch Solutions

10.1-inch Open Frame

ET1099L Touchscreen

User Manual: ET1099L Touchscreen

UM600770 Rev A, page 2 of 30

No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or

by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written permission of Elo Touch Solutions, Inc.

Disclaimer

The information in this document is subject to change without notice. Elo TouchSolutions, Inc. and its Affiliates (collectively “Elo”) makes no representations or warranties

with respect to the contents herein, and specifically disclaims any implied warranties of merchantability or fitness for a particular purpose. Elo reserves the right to

revise this publication and to make changes from time to time in the content hereof without obligation of Elo to notify any person of such revisions or changes.

TrademarkAcknowledgments

Elo, Elo (logo), Elo Touch,Elo TouchSolutions, are trademarks of Elo and its Affiliates. Windows is a trademark of Microsoft Corporation.

User Manual: ET1099L Touchscreen

UM600770 Rev A, page 3 of 30

Table of Contents

Section 1: Introduction ............................................................................................................................................................................................................................. 4

Section 2: Installation............................................................................................................................................................................................................................... 4

Section 3: Mounting ................................................................................................................................................................................................................................. 7

Section 4: Operation ................................................................................................................................................................................................................................ 9

Section 5: Technical Support.................................................................................................................................................................................................................. 14

Section 6: Safety & Maintenance........................................................................................................................................................................................................... 16

Section 7: Regulatory Information.......................................................................................................................................................................................................... 17

Section 8: Warranty Information............................................................................................................................................................................................................. 21

User Manual: ET1099L Touchscreen

UM600770 Rev A, page 4 of 30

Section 1: Introduction

Product Description

This 10.1-inch ET1099L touchscreen displaycombines Elo’s latest developments in touch technology and display design with the reliability for use in full outdoor

environments. It is designed to meet EN62368-1 Part 22 when properly mounted.

This 10.1-inch ET1099 touchscreen display incorporates a 1280x800 resolution, 1000nit brightness LCD panel to provide high quality display performance. The LED

backlight significantly reduces power consumption and eliminates mercury (compared to CCFL-backlit panels). The ambient light sensor on the front of the screen

offers added functionality to adapt the brightness setting to the environmental lighting conditions, helping to ensure the best user experience in any exterior setting.

With a vandal-resistant (IK9) anti-glare screen, the display is designed for optimal operation in harsh field conditions. The USB 5-point touch operates even if water

or other elements are on the screen, and this product also supports various other touch capabilities: RS232 Touch with 2 touches (via a separate optional cable kit:

E610090), and 2 touches with up to 6mm of additional cover glass on top of the touchscreen.

The addition of built-in thermal and humidity sensors and 2 external fans help to prevent the display from overheating. The touchscreen display is also equipped with

a Real Time Clock which gives you the ability to plan a power schedule.

Other features that enhance this LCD monitor’s display performance are Plug & Play compatibility with Windows, Android, or Linux operating systems, tethered

remote on-screen display (OSD) controls for easy access when integrated, simplified flush mounting design for easy IP66 and NEMA4X sealing, flexible flush, VESA,

and touch thru mounting options. The display supports 12V to 24V DC power input making it very easy to integrate with your current power solution.

Precautions

Follow all warnings, precautions and maintenance as recommended in this user manual to maximize the life of your unit and prevent risks to user safety. See the

Safety & Maintenance Section for more information.

This manual contains information that is important for the proper setup and maintenance of the unit. Before setting up and powering on your new touchscreen, read

through this manual, especially the Installation, Mounting, and Operation Sections.

User Manual: ET1099L Touchscreen

UM600770 Rev A, page 5 of 30

Section 2: Installation

Unpacking the Touchscreen Display

Open the carton and verify that the following items are present:

•

10.1-inch Open Frame Touchscreen

•

Quick Install Guide

•

HDMI cable (screw-lock type)

•

EEI label

•

VGA cable (screw-lock type)

•

USB cable (screw-lock type)

•

Flush Mount Brackets w/Screws

•

OSD remote

User Manual: ET1099L Touchscreen

UM600770 Rev A, page 6 of 30

Connector Panel & Interfaces

Touchscreen Display Connections

Connect the HDMI, DP, or VGA video cables between the monitor’s HDMI, DP, or VGA input connector and your HDMI/DP/VGA video source. Tighten the video

cable’s screws to prevent accidental disconnection when using the HDMI or VGA connector.

Connect the USB touch cable between the monitor’s USB connector and your PC’s USB port, or connect the VGA Y-cable (optional cable kit E810917) between

the monitor’s VGA connector and your PC’s COM (Serial) port. Tighten the USB cable’s screws to prevent accidental disconnection.

Connect a 12 to 24V DC power supply to the monitor’s input power jack. Elo offers a 12VDC power adapter with locking connector and regional power cable kits

separately.

The touchscreen display ships in an ON state, video should be displayed on your monitor once the cables are connected.

User Manual: ET1099L Touchscreen

UM600770 Rev A, page 7 of 30

Installing the Touch Technology Software Drivers

When using USB touch, no additional drivers are required for your projected-capacitive touchscreen display with Windows 7 and 10 or later operating systems,

because it uses Windows HID drivers. If you want to use RS232 touch, follow the below steps to install the Elo touch driver.

Todownload the latest touch drivers:

Visitwww.elotouch.com/Support/Downloads/Driver/DriverDownload/Default.aspx

Select the “Touch Drivers” from the “Product Category” dropdown menu.

Select the “Operating System”from the “Operating System” dropdown menu.

Click on the driver version required for your touchscreen display.

Non-Microsoft Windows operating system versions suggested below:

Linux Ubuntu: 18.04 LTS

Mac:OS BIG SUR 11.2

Chrome: 78.0.3904.106

Android: 7.10/8.10

User Manual: ET1099L Touchscreen

UM600770 Rev A, page 8 of 30

Section 3: Mounting

Flush Mount

Flush-mount Bracket Installation Notes:

See dimensional drawing for the exactdetails of the recommended enclosure panel

opening dimensions.

Place the 10.1-inch 1099 touchscreen display into your enclosure panel opening.

Attach flush mounting brackets (all four sides) with M4-5mm bracket screws (included)

to secure the touchscreen onto the enclosure panel. Adjust the touchscreen as close

as possible to flush with the front of the enclosure panel before tightening M4 bracket

screws. A socket wrench is recommended if clearance is limited.

Tighten the M4-6mm clamping screws on the short mounting brackets to bring the

touchscreen glass completely flush with the customer panel, then tighten the M4-6

clamping screws on the long mounting brackets, compressing the sealing gasket, and

ensuring a watertight seal to IP66 and NEMA4x standards.

Please ensure 2” clearance behind the touch screen display for airflow.

User Manual: ET1099L Touchscreen

UM600770 Rev A, page 9 of 30

Rear VESA Mount

A four-hole mounting pattern for M4x8mm screws is provided on the rear of the monitor for 75x75mm VESA mounting. The VESA FDMI-compliant counting is coded:

VESAMIS-E. Please ensure 2” clearance behind the touch screen display for ventilation.

User Manual: ET1099L Touchscreen

UM600770 Rev A, page 10 of 30

Section 4: Operation

Power

The touchscreen display ships in the ON state.

Toturn the touchscreen display on or off, attach the OSD remote via the RJ45 connector and press the touchscreen display power button on the OSD remote once.

The power status LED on the OSD remote functions according to the following table.

Touchscreen Display/Computer Module Status LED Status

OFF OFF

SLEEP PULSING

ON ON

The system consumes low power when in SLEEP and OFF modes. For detailed power consumption specifications, refer to technical specifications on the Elo

website http://www.elotouch.com

Touching the screen will bring the attached host PC out of SLEEP mode (similar to moving the mouse or pressing a keyboard key).

To improve reliability and reduce power consumption, disconnect the AC power cable from the monitor when long periods of disuse are planned.

Touch

Yourtouchscreen display is factory-calibrated and should not need manual calibration (unless the input video is not fully scaled to the native resolution, or the touch

experience needs to be calibrated to a specific user).

Tabla de contenidos

Otros manuales de Pantalla táctil de Elo TouchSystems

Elo TouchSystems

Elo TouchSystems 1915L Manual de usuario

Elo TouchSystems

Elo TouchSystems ET3201L Manual de usuario

Elo TouchSystems

Elo TouchSystems Elo IntelliTouch Manual de usuario

Elo TouchSystems

Elo TouchSystems 1739L Manual de lista de piezas

Elo TouchSystems

Elo TouchSystems 1938L Manual de usuario

Elo TouchSystems

Elo TouchSystems 90 Series Manual de usuario

Elo TouchSystems

Elo TouchSystems ET1002L Manual de usuario

Elo TouchSystems

Elo TouchSystems 1519L Manual de usuario

Elo TouchSystems

Elo TouchSystems SELF SERVICE STAND Manual de usuario

Elo TouchSystems

Elo TouchSystems Entuitive 192XL-XXWA-1 Series Manual de usuario

Elo TouchSystems

Elo TouchSystems B-series Manual de usuario

Elo TouchSystems

Elo TouchSystems E744255 Manual de usuario

Elo TouchSystems

Elo TouchSystems 1520 Manual de usuario

Elo TouchSystems

Elo TouchSystems LCD Manual de usuario

Elo TouchSystems

Elo TouchSystems B1ET-1215L Manual de usuario

Elo TouchSystems

Elo TouchSystems 1938L Manual de usuario

Elo TouchSystems

Elo TouchSystems 3200L Manual de usuario

Elo TouchSystems

Elo TouchSystems 2201 Manual de usuario

Elo TouchSystems

Elo TouchSystems 3000 Series Manual de usuario

Elo TouchSystems

Elo TouchSystems 1524L Manual de usuario

Elo TouchSystems

Elo TouchSystems VuPoint M-Series Manual de usuario

Elo TouchSystems

Elo TouchSystems 2240L Manual de usuario

Elo TouchSystems

Elo TouchSystems 63 Series Manual de usuario

Elo TouchSystems

Elo TouchSystems 3239L Manual de usuario

Manuales populares de Pantalla táctil de otras marcas

Elecro Engineering

Elecro Engineering Poolsmart Plus Instrucciones de instalación

Johnson Controls

Johnson Controls IQ4 HUB Manual de usuario

Duratec

Duratec S15 Manual de usuario

Crestron

Crestron TPMC-3SM Manual de usuario

Racelogic

Racelogic MFD Touch Manual de usuario

J2 580 Guía del usuario

HAI

HAI OmniTouch 10p Manual de usuario

panel

panel PC PSR108-FM Series Manual de usuario

Tipro

Tipro FREE+ Manual de usuario

Systemline

Systemline Commander Manual de usuario

Interactive Technologies

Interactive Technologies Insite Manual de usuario

GVision

GVision Legacy Manual de usuario

BeiJer

BeiJer T21C-C24 Manual de usuario

Advantech

Advantech ITM-5117 Series Manual de usuario

Edge

Edge CS Manual de usuario

Vimar

Vimar 01420.B Manual de usuario

iSMA

iSMA iSMA-D-PD10C-B1 Manual de usuario

UTC Fire and Security

UTC Fire and Security Interlogix UX-TOUCH01 Instrucciones de montaje