Elegoo NEPTUNE 3 Manual de usuario
User Manual
for NEPTUNE 3 3D Printer
Pictures are only for illustration purpose, please take actual product as standard.
Thank you for choosing ELEGOO product!
For your convenience, please read this instruction manual carefully before use, the cautions and
tips in this manual can help you better avoid incorrect installation and use.
For questions or problems not covered in this manual, please contact us at this email address:
ELEGOO team is always ready to provide you with quality service.
To give you a better experience of our products, you can also gain knowledge of the operation of the
equipment in the following ways：
1.The instruction manual: You can find the relevant operating instructions and videos on how to
operate the machine in the TF Card.
2.ELEGOO official website: www.elegoo.com You can go to our official website to find the relevant
operating instructions for the machine and contact information.
Cautions
1. Do not place the printer in vibrating or other unstable environments, as the shaking of the machine
will affect the print quality.
2. Do not touch the nozzle and heatbed when the printer is working to prevent high-temperature
scald and personal injury.
3. After printing, please take advantage of the residual temperature of the nozzle and clean the
filaments on the nozzle with the help of tools. Do not touch the nozzle directly with your hands during
cleaning to avoid scald.
4. Please do product maintenance frequently, and regularly clean the printer body with a dry cloth to
wipe away dust and sticky print material under the situation of power off.
5. 3D printers contain high-speed moving parts, so be careful not to get your hands caught.
6. Children must be supervised by adults when using the machine to avoid personal injury.
7. In case of emergency, please cut off the power directly.
Contents
Machine Parameters ----------------------------------------------------
Machine Structure Diagram --------------------------------------------
Packing List ----------------------------------------------------------------
Machine Installation ------------------------------------------------------
Operation Screen Introduction ----------------------------------------
Auto Leveling -------------------------------------------------------------
Model Test ------------------------------------------------------------------
Resume Printing Description ------------------------------------------
Software Installation -----------------------------------------------------
Online Print ----------------------------------------------------------------
Troubleshooting Guide -------------------------------------------------
Circuit wiring --------------------------------------------------------------
17
14
12
11
10
9
8
4
3
2
1
18
1
Machine Parameters
Print Parameters
Print Principle：FDM（Fused Deposition Modeling）
Build Volume：220X220X280(mm³)
Print Precision：±0.1mm
Nozzle Diameter：0.4mm
Print Speed：30~180mm/s（60mm/s is recommanded）
Temperature Parameters
Ambient Enviroment Temperature：5°C~40°C
Maximum Temperature of Nozzle：260°C
Maximum Temperature of Hotbed：100°C
Software Parameters
Slicer Software：Cura
Input Format：STL、OBJ
Output Format：Gcode
Connection Type：TF Card、USB Wire
Power Supply Parameters
Power Input：100-120V/200-240V
Power Output：24V
Physical Parameters
Machine Dimensions：442*452*530mm
Neptune 3 Machine Weight：8.1kg
2
Handle
Filament tube Machine Structure Diagram
Filament holder
PTFE tube
X-axis belt
tensioner
Power Switch
Touch screen
Z+:Photoele
ctric limit
switch
Nozzle kit
X-axis limit
switch
Power
supply
Build
platform
Y-axis limit
switch
Y-axis stepper
Extruder stepper
Z-axis
stepper
X-axis
stepper
Material breakage
detector
Sensor
adapter kit
TF Card
slot
Type-B interface
Y-axis belt
tensioner
Packing List
ELEGOO 3D Printer
Fasteners
01 02
3
（HM5*45）4pcs
（HM4*18）2pcs
03 04 05 06 07
(1.5 / 2.0 / 2.5 / 3.0 / 4.0)
08 09
（HM4*10）2pcs
Tools
4
（HM5*45）4pcs
（HM4*18）2pcs
03
02
01
4.0
3.0
Before turning on the power supply, be sure to check the
voltage mode and adjust the voltage to match the local voltage.
If the local voltage is 100V-120V, please adjust the power switch
to 115V, otherwise adjust to 230V (default is 230V).
① ②
The TF card of the machine comes with an installation instruction video.
Machine Installation
3.0
1. Please note that the material rack is pre-installed with screws and nuts. When installing, just loosen the
screw until the nuts can move, then install the material rack in the top profile slot and tighten the screws,
see the picture.
2. Please note that two square nuts are reserved in the profile slot to install the handle, see the picture.
Insert the two M4*10 screws through the corresponding holes and tighten them with the nuts in the profile.
06
5
04
05
③
07 09
④
（HM4*10）2pcs
6
E
Extruder stepper
X
X-axis stepper
X
X-axis limit switch
Filament
detector
Filament detector switch
Z
Z-axis stepper
Z-
Z-：port
⑤
Please adjust the voltage
to match the local
voltage before use.
Z
Z+:Photoelectric
limit switch
Otros manuales para NEPTUNE 3
1
Tabla de contenidos
Otros manuales de Impresora 3D de Elegoo
Elegoo
Elegoo NEPTUNE 3 MAX Manual de usuario
Elegoo
Elegoo NEPTUNE 4 PRO Manual de usuario
Elegoo
Elegoo Neptune 4 Max Manual de usuario
Elegoo
Elegoo Neptune X Manual de usuario
Elegoo
Elegoo NEPTUNE 3 MAX Manual de usuario
Elegoo
Elegoo Neptune Hoja de instrucciones
Elegoo
Elegoo Neptune3 Instrucciones de montaje
Elegoo
Elegoo Neptune 4 Manual de usuario
Elegoo
Elegoo Neptune 3 Plus Manual de usuario
Elegoo
Elegoo SATURN 2 Manual de usuario
Elegoo
Elegoo NEPTUNE 4 PRO Manual de usuario
Elegoo
Elegoo Neptune 2 Manual de usuario
Elegoo
Elegoo MARS 4 Series Manual de usuario
Elegoo
Elegoo Saturn 3 Ultra Manual de usuario
Elegoo
Elegoo NEPTUNE 3 PRO Manual de usuario
Elegoo
Elegoo PHECDA Manual de usuario
Elegoo
Elegoo Saturn 4 Ultra Manual de usuario
Elegoo
Elegoo Neptune 4 Plus Manual de usuario
Elegoo
Elegoo NEPTUNE 4 PRO Manual de usuario
Elegoo
Elegoo Neptune 4 Plus Manual de usuario
