Draytek Vigor1000B Manual de usuario

Vigor1000B

Multi-WAN Security Router

Quick Start Guide

Version:1.0

Firmware Version: V3.9.6.3

(For future update, please visit DrayTek web site)

Date: August 23, 2021

iii

Intellectual Property Rights (IPR) Information

by copyright. No part may be reproduced, transmitted, transcribed, stored in

a retrieval system, or translated into any language without written permission

from the copyright holders.

Trademarks The following trademarks are used in this document:

Microsoft is a registered trademark of Microsoft Corp.

Windows 8, 10 and Explorer are trademarks of Microsoft Corp.

Apple and Mac OS are registered trademarks of Apple Inc.

Other products may be trademarks or registered trademarks of their

respective manufacturers.

Safety Instructions and Approval

Safety

Instructions

Read the installation guide thoroughly before you set up the router.

The router is a complicated electronic unit that may be repaired only be

authorized and qualified personnel. Do not try to open or repair the

router yourself.

Do not place the router in a damp or humid place, e.g. a bathroom.

Do not stack the routers.

The router should be used in a sheltered area, within a temperature

range of +5 to +40 Celsius.

Do not expose the router to direct sunlight or other heat sources. The

housing and electronic components may be damaged by direct sunlight or

heat sources.

Do not deploy the cable for LAN connection outdoor to prevent electronic

shock hazards.

Keep the package out of reach of children.

When you want to dispose of the router, please follow local regulations on

conservation of the environment.

Warranty

We warrant to the original end user (purchaser) that the router will be free

from any defects in workmanship or materials for a period of two (2) years

from the date of purchase from the dealer. Please keep your purchase receipt

in a safe place as it serves as proof of date of purchase. During the warranty

period, and upon proof of purchase, should the product have indications of

failure due to faulty workmanship and/or materials, we will, at our discretion,

repair or replace the defective products or components, without charge for

either parts or labor, to whatever extent we deem necessary tore-store the

product to proper operating condition. Any replacement will consist of a new

or re-manufactured functionally equivalent product of equal value, and will

be offered solely at our discretion. This warranty will not apply if the product

is modified, misused, tampered with, damaged by an act of God, or subjected

to abnormal working conditions. The warranty does not cover the bundled or

licensed software of other vendors. Defects which do not significantly affect

the usability of the product will not be covered by the warranty. We reserve

the right to revise the manual and online documentation and to make changes

from time to time in the contents hereof without obligation to notify any

person of such revision or changes.

EU Declaration of Conformity

We DrayTek Corp. , office at No.26, Fushing Rd., Hukou, Hsinchu Industrial Park,

Hsinchu 303, Taiwan, declare under our sole responsibility that the product

Product name: Multi-WAN Security Appliance

Model number: Vigor1000B

Manufacturer: DrayTek Corp.

Address: No.26, Fushing Rd., Hukou, Hsinchu Industrial Park,

Hsinchu303,Taiwan

is in conformity with the relevant Union harmonisation legislation:

EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU and RoHS 2011/65/EU

with reference to the following standards

Standard Version / Issue date

EN 55032 2015+AC:2016 class A

EN 61000-3-2 2014 Class A

EN 61000-3-3 2013

EN 55024 2010+A1:2015

EN 62368-1 2014/AC:2015

EN IEC 63000:2018 2018

Hsinchu 22nd February, 2021 Calvin Ma / President

(place) (date) (Legal Signature)

1. Package Content .................................................................................................. 1

2. Panel Explanation................................................................................................. 2

2.1 LED ............................................................................................................................................ 2

2.2 Connectors................................................................................................................................. 3

3. Hardware Installation ........................................................................................... 4

3.1 Connecting Device..................................................................................................................... 4

3.2 Rack-Mounted Installation.......................................................................................................... 5

4. Software Configuration........................................................................................ 6

Take a look at the package content. If there is anything missed or damaged,

please contact DrayTek or dealer immediately.

Vigor router Quick Start Guide

RJ-45 Cable (Ethernet) Rack mount kit (brackets)

Console Connector Console Flat Cable

The type of the power cord depends on the country that the router will be

installed.

USA/Taiwan-type Power Cord EU-type Power Cord

LED Status Explanation

On The router is powered on.

PWR Off The router is powered off.

Blinking The system is active.

ACT Off The system is hanged.

On The USB device is installed and ready.

USB Off No USB device is installed.

On The fiber connection is established.

Blinking The data is transmitting.

SFP+ Off No fiber connection is established or the

system is hanged.

On The Ethernet link is established on

corresponding port.

Off No Ethernet link is established.

Left

Blinking The data is transmitting.

On The Ethernet link is established on

corresponding port with 1G Mbps or above.

P3 ~P10

Right Off The Ethernet link is established on

corresponding port with less than 1G Mbps.

Interface Description

USB1 / USB2 Connecter for the USB device.

Console Provided for technician use.

SFP+ (P1~P2) Connecter for SFP module with the rate of 10G/1G bps.

P3~P6 Connectors for remote network devices or local

network devices (WAN/LAN) with the rate of

1G/100M/10M bps.

P7~P10 Connecter for local network devices (LAN) with the rate

of 1G/100M/10M bps.

The Factory Reset button is used to restore the default

settings. Turn on the router (ACT LED is blinking). Press

the hole and keep for more than 5 seconds. When you

see the ACT LED begins to blink rapidly than usual,

release the button. Then the router will restart with

the factory default configuration.

Connecter for a power cord.

ON/OFF - Power switch.

The ports “P3 to P6” are switchable. It can be used for LAN connection or WAN

connection according to the settings configured in WUI.

This section will guide you to install the router through hardware connection and

configure the router’s settings through web browser.

Before starting to configure the router, you have to connect your devices

correctly.

1. Connect a modem to any WAN port of Vigor1000B with Ethernet cable

(RJ-45) to access Internet.

2. Connect the other end of the cable (RJ-45) to the Ethernet port on your

computer (that device also can connect to other computers to form a small

area network). The LAN LED for that port on the front panel will light up.

3. Connect a server/router (depends on your requirement) to any WAN port

ofVigor1000B with Ethernet cable (RJ-45). The WAN LED will light up.

4. Connect the power cord toVigor1000B’s power port on the rear panel, and

the other side into a wall outlet.

5. Power on the device by pressing down the power switch on the rear panel.

The PWR LED should be ON.

6. The system starts to initiate. After completing the system test, the ACT LED

will light up and start blinking.

Below shows an outline of the hardware installation for your reference.

-M

The Vigor1000B can be mounted on the shelf by using standard brackets shown

below.

1. Fasten the rack mount kit on both sides of the Vigor router using specific

screws.

2. Then, install the Vigor router (with rack mount kit) on the 19-inch chassis by

using other four screws.

Tabla de contenidos

Otros manuales de Enrutador de red de Draytek

Draytek

Draytek Vigor2130 Series Manual de usuario

Draytek

Draytek Vigor2130 Series Manual de usuario

Draytek

Draytek Vigor 2925n Manual de usuario

Draytek

Draytek Vigor 2930 Guía de referencia

Draytek

Draytek Vigor2860 Series Manual de usuario

Draytek

Draytek Vigor2912 Series Manual de usuario

Draytek

Draytek Vigor 2800Gi Guía de referencia

Draytek

Draytek Vigor2962 Series Manual de usuario

Draytek

Draytek Vigor2762 series Manual de usuario

Draytek

Draytek VigorIPPBX 3510 Series Manual de usuario

Draytek

Draytek Vigor2130 Series Manual de usuario

Draytek

Draytek Vigor 2800 Manual de usuario

Draytek

Draytek Vigor2925 Series Manual de usuario

Draytek

Draytek Vigor2762n Manual de usuario

Draytek

Draytek Vigor 2925 Series Manual de usuario

Draytek

Draytek Vigor 2762 Series Manual de usuario

Draytek

Draytek Vigor2860 Series Manual de usuario

Draytek

Draytek Vigor3200 Series Manual de usuario

Draytek

Draytek Vigor3300V+ Manual de usuario

Draytek

Draytek Vigor2912 Series Manual de usuario

Draytek

Draytek Vigor 3100 Series Manual de usuario

Draytek

Draytek Vigor2962 Series Manual de usuario

Draytek

Draytek Vigor3910 Series Manual de usuario

Draytek

Draytek Vigor2710 Series Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad