Doro AUB 6 Manual de usuario

Manual

   

doro aub 6

STORE

1 Handset socket

12 Shift button

2 Mute button

13 Memory buttons

3 Pause button

14 Store button

4 Mute light

15 Display

5 Message waiting lights

16 Ringer pitch

6 Ringer light

17 Ringer volume

7 Speaker light

18 E/T switch

8 Speaker/headset button

19 Time button

9 Recall button

20 Hook switch

10 Speaker volume control

21 Wall mounting hanger hook

11 Redial button

22 Headset socket

English

www.doro.com

Installation

Connection

1. Connect the curly cord to the handset and to the socket markedHandset

located on the left side of the telephone.

Connect the line cord tothe telephone and network wall socket.

A click will be heard when the modular plug is correctly in place.

Lift the handset and listen for the dial tone. Your telephone is now

operational.

Connection of a headset

A headset can be connected to the socket on the left side of the telephone marked

Simply press the Speaker/Headset button to access an incoming call or dial tone,

press again to terminate the call.

While a headset is connected the Hands Free function will NOT operate.

IMPORTANT!

The AUB 6MW is designed to operate with DORO original headsets. Other

manufacturer headsets may be used, although the function and sound quality cannot be

guaranteed.

Any damage occurring due to incompatible or non Doro headsets being installed, will not be

covered under the telephones guarantee.

Headset.

1. Press Speaker/Headset. Dial tone will be heardand the speaker light will

illuminate.

2. Dial the telephone number required.

3. Press Speaker/Headset again to terminate the call.

Making a call using either Hands Free or Headset

Press

Lift the handset, dial tone will be heard.

Dial the telephone number required.

Replace the handset to terminate the call.

Making a call

Carefully remove the battery cover from the underside of the telephone and

install 3 x AAA alkaline batteries observing correct polarity.

English

4 www.doro.com

Installation

Redial Button

If the number dialled is engaged or if you wish to redial the last number dialled

(up to a maximum of 32 digits), lift the handset (or press the Monitor/Headset

button) and press the LNR/II button.

Mute Button

The handset, hands free & headset microphone can be disabled during a call by

pressing the Mute button, the Mute light will illuminate.

Press the Mute button once more to reactivate the microphone.

Volume Control

The hands free speaker volume/headset earpiece volume may be adjusted during

a call using the Volume control located on the right side of the unit.

to increase the volume, or to LO to

decrease the volume.

To adjust the volume slide the switch to HI

Recall

Ringer volume

The ringer volume can be adjusted (OFF/LO/HI) using the switch located at the

top of the unit.

Ringer pitch

The ringer pitch can be customised (LO/MID/HI) using the switch located at the

top of the unit.

Hearing Aid Compatible

This telephone is hearing aid compatible. Select the T mode on your hearing

aid to enable this feature.

Press the Recall button followed by the extension number to transfer callswhen

connected to a PBX(TBR and ETH).

Access to additional network services can be gained by using theRecall button,

Please contact your network operator for more information.

select either TBR/ETH recall using the switch located at the top of the unit.

English

www.doro.com 5

Installation

Memory

This telephone can store 30 (2 x15) numbers in memory buttons located above the

numbers per location.

or two buttons to make the call.

Storing Memories

1. Lift the handset or press speaker/headset.

Dial tone will be heard (from this point ignore anything you hear in the

a location by pressing the corresponding direct memory button.

In case of a number change, store the new number in the location of the old one following the

above procedure

Dialling Memories

1. Lift the handset or press speaker/headset.

Dial the desired number by pressing either the corresponding memorybutton,

earpiece).

Replace the handset or press speaker/headset again.

To insert a pause in the dialling sequence simply press the Pause button.

Dial tone will be heard.

3.Using a blunt instrument press and release the STORE button,then select

Enter the number to be stored (up to 16 digits). Press STORE again.

Alternatively, using a blunt instrument press and release the STORE button,

press the Shift button followed by the corresponding direct memory button.

or alternatively press the shift button followed by the corresponding memory

button.

numeric keypad, using the Shift button allows each memory to store 2 telephone

Once a number has been stored in a memory location, you need only to press one

English

6 www.doro.com

Other

Message waiting

Setting the Clock

Message Waiting Indicator

Many PBX systems use a function called Message Waiting. The telephone can

show if a call was received in you absence by ashing the Message Waiting

Indicator in standby mode. This function operates differently depending on the

PBX in question. Please contact the system controller for more information.

Wall mounting

The telephone can be wall mounted using the optional wall bracket TWB223,

which then fits into the two slots located on the underside of the telephone.

NOTE!

When the telephone is wall mounted the hanger hook must be pulled out and rotated 180 degrees to

create the hook rest required for the handset.

1. Using a blunt instrument press the Store button.

Using a blunt instrument press the Time button.

3.Enter the month (01 Jan, 02 Feb) using the numeric keypad.

Enter the date again using the numeric keypad.

Press *to select AM or #to select PM.

Enter the hours (12 hour format) using the numeric keypad.

Enter the minutes using the numeric keypad.

Using a blunt instrument press the Store button again.

You can select between two types of Message Waiting systems: Neon(80-100V

/LED voltage line reversal).

The message waiting switch is located to the left of the keypad under the number

card.

English

www.doro.com7

Other

Guarantee

This product is guaranteed for a period of 10 years from the date of purchase.

Proof of purchase is required for any service or support required during the

guarantee period.

This guarantee shall not apply to a fault caused by an accident or any similar

incident or damage, liquid ingress, negligence, abnormal usage or any other

circumstances on the purchaser’s part. Furthermore, this guarantee shall not

apply to a fault caused by a thunderstorm or any other voltage uctuations.

This guarantee does not in any way affect your statutory rights. (As a matter of

precaution, we recommend disconnecting the telephone during a thunderstorm.)

If you cannot resolve the fault using the troubleshooting section, technical

support is available on the Premium Rate Number: 0906 302 0114.

Calls cost 50 pence per minute (prices correct at the time of going to

press), and is operational between 9AM - 5PM Monday-Friday excluding Bank

Holidays. Alternatively,

E-mail on: tech@doro-uk.com

You can contact us in writing: Consumer Support Group, Doro UK Ltd.,

22 Walkers Road, North Moons Moat, Redditch, Worcestershire, B98 9HE,

(regarding any Spares or Technical query), or

Telephoning (Spares only): 01527 584377

Web site: www.doro-uk.com

Troubleshooting

Check that the telephone cord is undamaged and properly plugged in.

Disconnect any additional equipment that may be connected. If the problem is

resolved, the fault is with the other equipment.

Test the equipment on a known working line. If the product works then the

fault is with the line.

Tabla de contenidos

Otros manuales de Teléfono de Doro

Doro

Doro PhoneEasy 312cs Manual de usuario

Doro

Doro 920 Manual de usuario

Doro

Doro AFTI 40 Manual de usuario

Doro

Doro CONGRESS 200 Manual de usuario

Doro

Doro PhoneEasy 331ph Manual de usuario

Doro

Doro 909c Manual de usuario

Doro

Doro NEOBIO 10 Manual de usuario

Doro

Doro PhoneEasy Display 312C Manual de usuario

Doro

Doro PHONEEASY RECORD 327CR Manual de usuario

Doro

Doro AFTI 20 Manual de usuario

Doro

Doro COMFORT 3000 Manual de usuario

Doro

Doro PhoneEasy 312ci Manual de usuario

Doro

Doro AFTI 45 Manual de usuario

Doro

Doro NeoBio 40 Manual de usuario

Doro

Doro 212IPC Manual de usuario

Doro

Doro COMFORT 4005 Manual de usuario

Doro

Doro PHONEEASY 410GSM Manual de usuario

Doro

Doro AlertEasy 314C Manual de usuario

Doro

Doro 5030 Manual de usuario

Doro

Doro 501 Manual de usuario

Doro

Doro Arc 7 Manual de usuario

Doro

Doro Magna 4000 Manual de usuario

Doro

Doro AFTI 30 Manual de usuario

Doro

Doro AUB 3 Manual de usuario

Manuales populares de Teléfono de otras marcas

GE 2-9480 Manual de usuario

Geemarc

Geemarc PHOTOPHONE 155 Manual de usuario

D-Link

D-Link DWR-720/PW Manual de usuario

Interquartz

Interquartz Gemini IQ333 Manual de usuario

SSS Siedle

SSS Siedle HT 840-0 Manual de usuario

Motorola

Motorola TITANIUM Manual de usuario

Panasonic

Panasonic ICX Manual de usuario

LG H870DS Manual de usuario

Samsung

Samsung GT-I9500 Manual de usuario

AT&T

AT&T Trimline 205 Manual de usuario

Selta

Selta zenyth 600 Manual de usuario

UNIQCELL

UNIQCELL A1 Manual de usuario

Panasonic

Panasonic KX Series Manual de usuario

Jabra

Jabra SP5050 - Bluetooth hands-free Speakerphone Manual de usuario

BT Decor 425 Manual de usuario

NEC

NEC SV8500 Manual de usuario

Teledex

Teledex PEARL Manual de usuario

Ericsson

Ericsson Dialog 3213 Manual de usuario