Dish Network 20.1 Manual de usuario

Remote User Guide

Safety Instructions

You must keep safety in mind while using this device. Keep

these and any other instructions for future reference.

Observe Warnings: Carefully follow all warnings on the device

and in the operating instructions.

Heat: Do NOT place the device near heat sources such as

radiators, stoves, heat registers, or other appliances that

produce heat.

Care and Use

Cleaning: Do NOT use liquid, abrasive, solvent, or aerosol

cleaners. Use a damp cloth for cleaning.

When Not in Use: Remove the batteries if this device is to be

left unattended or unused for a long period of time.

Refer servicing to qualied personnel when a

solid object or liquid has fallen onto or into the

device.

Do NOT attempt to service this device. Refer all

servicing to qualied personnel. Opening covers

other than the battery cover will void the warranty.

Publishing Information

The information in this User Guide may change without notice.

Revisions may be issued to tell you about such changes.

Send comments or questions about this User Guide to

techpubs@echostar.com or

Technical Publications, EchoStar Technologies L.L.C,

90 Inverness Drive Circle East, Englewood, Colorado 80112.

Document Number: 180532

Printed in

DISH Network is a registered trademark of

DISH Network L.L.C.

All product names, trade names, or corporate names

mentioned in this User Guide are acknowledged to be the

proprietary property of the registered owners.

Conguring the 20.1 Remote

Conguring the 21.1 Remote

The 20.1 remote does not require any

conguration. Go to Insert the Batteries (page 2).

Pull the remote battery cover off.

Decide whether to use IR or UHF

signals for the remote. Use UHF

signals if you do not have a clear

line of sight between the remote

and the receiver.

Set UHF/IR SWITCH to either

UHF or IR. If your remote has a

blank, black key, continue to

Insert the Batteries on page 2.

If your remote shows a “1” or a

“2” on the bottom, you can pull

out this key and ip it to the other

number (2 to 1 and 1 to 2). To

separate the key from the remote,

insert your thumbnail or a coin in

the crease. Remove the key by

grasping at the bottom.

Insert the key you wish to use to

designate the remote and slide

into place. Usually a 1 = TV1 and

a 2 = TV2. For remotes showing

the blank, black key, leave this

key as it is.

Complete the following

steps to congure

your remote.

Insert the Batteries

Pull the remote battery

cover off.

Insert 4 AAA batteries,

making sure to match the

plus (+) ends with the plus

markings on the battery

case.

Replace the remote

battery cover.

Using System Wizard

Note: Not all receivers support System Wizard. If

System Wizard does not appear, continue with page 4

or page 5 to make your remote work with your receiver.

Use System Wizard initially to set up the remote to

work with the receiver. System Wizard can also store/

restore your remote settings. Note: If your batteries are

low, replace them before beginning.

Press and hold 0 until

System Wizard message

appears. Make sure the

remote and receiver are

in line of sight.

If rst time in System

Wizard, follow

instructions provided.

When green checkmark

displays, select

Advanced to store/

restore remote settings.

Follow the on-screen

options.

Select Continue to

return to Live TV.

Making 20.1 and 21.1 IR

Remote Work with Receiver

Turn your receiver and

TV on, and press

SYSTEM INFO on the

front of the receiver.

Conrm that you

see the System

Info screen.

Press RECORD on

your remote. The

receiver then matches

the remote’s address.

Conrm that your remote

operates your receiver by

pressing remote buttons.

If this is not working, go

back to step 3.

For 20.1 and 21.1 IR

Use the following

instructions to

congure your remote

while using IR signals.

Note: Use these instructions if your receiver

does not support System Wizard.

Making 21.1 UHF Remote

Work with Receiver

Verify the UHF antenna

is installed on the back

of the receiver.

Turn your receiver and

TV on, and press

SYSTEM INFO on the

front of the receiver.

Conrm that you

see the System

Info screen.

Press RECORD on

your remote. The remote

address will probably

change on the screen.

Conrm that your remote

operates your receiver

by pressing remote

buttons. If this is not

working, go back to

step 4.

For 21.1 UHF

Use the following

instructions if you

have congured

your remote to use

UHF signals.

Note: Use these instructions if your receiver

does not support System Wizard.

SAT Mode

To use the features described in this section, make sure

you are in SAT mode by pressing the SAT Mode button.

Note: Some features may not be available depending on your

receiver model.

SAT

Power & TV Power

Top button turns the receiver on/off

Bottom button turns the TV on/off

Press this

button for

SAT Mode

Volume and

Mute Buttons

Control TV volume

Programming required

Recall

Return to last

TV channel viewed

Picture-In-Picture

(PIP) Buttons

Watch two separate

programs at once

(in Single Mode)

Number Buttons

Enter a channel

number or

navigate through

menus

Receiver Menu

Access receiver

features and settings

Input

Press once for Input

Press and hold

for Recover

Themes

Search for programs

using Themes

Info

Get info on programs

Search for a program

Shortcut Keys

(for future use)

Digital Video

Recorder (DVR)

Buttons

Pause live TV and

play or record

programming

Format

Format the picture

to the desired width

to match the program

you are viewing System Wizard

Press and hold

to x remote

control issues

and sync data

DishHOME

Explore interactive

TV features

Arrow/Select

Buttons

Channel up/down,

navigate through

menus, and select

a desired option

View Satellite

Programming

Exit out of any

menu/guide and

return to viewing

live TV

Cancel

Return to

previous menu

or to watching a

program

Browse

See what is on

other channels

while watching TV

Program Guide

Display current and

future satellite

program listings

Page Buttons

Page up/down in

menus

TV Mode TV

Up/Down

Arrow Buttons

Channel up/

down on TV

Power

& TV Power

Turn the TV on/off

Volume

Control TV

volume

Press this

button for

TV Mode

Mute

Turn TV volume

on or off

Recall

Return to last

TV channel viewed

Picture-In-Picture

(PIP) Buttons

Display PIP features

on some TVs with

PIP capabilities

Number Buttons

Enter a desired

channel number

on TV

TV Menu

Access menu

features available

on some TVs

Input

Switch between

TV inputs

DVD Mode DVD

Power

& TV Power

Top button turns the

DVD player/VCR

power on and off

Bottom button turns

the TV on and off

Up/Down

Arrow Buttons

Channel up/

down on VCR

FWD

Forward a

videotape or DVD

Play

Play a videotape

or DVD

Number Buttons

Enter a channel

number for DVD

Pause

Pause a videotape

or DVD

Press this

button for

DVD Mode

Input

Switch VCR between

its TV & VCR mode

Back

Rewind a videotape

or reverse a DVD

Stop

Stop playing a DVD,

stop playing or

recording a

videotape

Record

Record on a

videotape

Otros manuales para 20.1

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Mando a distancia de Dish Network

Dish Network

Dish Network Platinum PVR Remote Control Manual de usuario

Dish Network

Dish Network Platinum Remote Control Manual de usuario

Dish Network

Dish Network 20.0 Manual de usuario

Dish Network

Dish Network Solo 301 Instrucciones de uso

Dish Network

Dish Network Hopper with Sling Manual de usuario

Dish Network

Dish Network 159263 Manual de usuario

Dish Network

Dish Network 52.0 Manual de usuario

Dish Network

Dish Network EZ Manual de usuario

Dish Network

Dish Network Duo ViP 222 Manual de uso y mantenimiento

Dish Network

Dish Network 129418 Manual de usuario

Dish Network

Dish Network 11 Hoja de especificaciones

Dish Network

Dish Network Digital PVR Manual de usuario

Dish Network

Dish Network EZ Manual de usuario

Dish Network

Dish Network digital remote control Manual de usuario

Dish Network

Dish Network Platinum Plus 121150 Manual de usuario

Dish Network

Dish Network SoloDVR ViP 612 Manual de uso y mantenimiento

Dish Network

Dish Network 20.0 Manual de usuario

Dish Network

Dish Network BASIC REMOTE Manual de usuario

Dish Network

Dish Network 135331 Manual de usuario

Dish Network

Dish Network Duo ViP 222 Manual de usuario

Dish Network

Dish Network 176842 Manual de usuario

Dish Network

Dish Network 311k Manual de usuario

Dish Network

Dish Network 40.0 Manual de usuario

Dish Network

Dish Network 40.0 Manual de usuario

Manuales populares de Mando a distancia de otras marcas

Panasonic

Panasonic EUR7622KB0 Manual de usuario

Bang & Olufsen

Bang & Olufsen Beo4 Manual de usuario

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manual de usuario

Multiplex

Multiplex PROFI TX 9 Manual de usuario

One Remote

One Remote RMB4 Manual de usuario

FUTABA

FUTABA 9ZAP - PART2 Manual de usuario

HR Matic

HR Matic HR MULTI 3 Manual de usuario

Yamaha

Yamaha ACC-GNRST-30-20 Manual de usuario

EisSound

EisSound KBSOUND Manual de usuario

Marantz

Marantz RC101 Manual de usuario

Conrad

Conrad FS20 TC6 Manual de usuario

Anritsu

Anritsu MP1777A Manual de usuario

Niles

Niles WVC100 Guía de solución de problemas

RCA

RCA RCU1300 Manual de usuario

Bang & Olufsen

Bang & Olufsen BEO6 Manual de usuario

GE 94901 Manual de usuario

Onbon

Onbon YQ1-75 Manual de usuario

FUTABA

FUTABA R7108SB Instrucciones de instalación