Digitus DN-95320-1 Manual de usuario

Fast Ethernet PoE Switch

4-port PoE + 1-port uplink,

60W PoE Budget

Quick Installation Guide

DN-95320-1

Our company reserves all copyrights of this document. Any

reproduction, excerption, backup, modification, transmission,

translation or commercial use of this document or any portion

of this document, in any form or by any means, without the

prior written consent of our company is prohibited.

Exemption Statement

This document is provided "as is". The contents of this

document are subject to change without any notice. Please

obtain the latest information through our company website.

Our company endeavors to ensure content accuracy and will

not shoulder any responsibility for losses and damages caused

due to content omissions, inaccuracies or errors.

1. Product Introduction

The DIGITUS DN-95320-1 is a 5-Port 10/100M Desktop PoE

Switch, that enables a seamless network connection. It

integrates 100 Mbps Fast Ethernet and 10 Mbps Ethernet

network capabilities. These PoE ports can automatically

detect IEEE 802.3af/at-compliant Powered Devices (PDs) and

supply them with power. The operating mode can be changed

using the slide switch on the front side.

When switching into extend mode, Ports 2-5 can be switched

into long range mode at up to 250 meters with 10 Mbps.

The DN-95320-1 is easy to install and to use. It does not

require any configuration or installation. With its desktop

design, outstanding performance and quality, the 5-Port

10/100 Desktop PoE Switch is an excellent choice for

extending video monitoring or WLAN access points.

1.1 Features

PoE support: Port 1-4 (802.3 af/at)

PoE total output: 60 watts

4 RJ45 PoE Ports

An RJ45 port can also be used as an uplink port

External power supply, sophisticated design, suitable for

desktop installation

LED displays: PoE, link, activity

Supports data transfer of up to 250 m at a rate of 10 Mbps.

Automatically detects PoE devices on connection, devices

that are not PoE-capable can also be used.

1.2 Package Contents

Before installing the Switch, make sure that the following the

"packing list" listed OK. If any part is lost and damaged,

please contact your local agent immediately. In addition,

make sure that you have the tools install switches and cables

by your hands.

1 x 5-Port 10/100Mbps Ethernet

Unmanaged PoE Switch (4-Port PoE).

1 x Installation Component

1 x DC Power Adapter

1 x Quick Installation Guide

1.3 Hardware Specifications

Standards

IEEE802.3i, IEEE802.3u,

IEEE802.3x, IEEE802.3az,

IEEE802.3at, IEEE802.3af

Interface

5 x 10/100Mbps

Auto-Negotiation ports

Mode switch



Default mode:1-5 port speed

rate 100 Mbps, communicate

with each other

Extend mode:1port speed rate

100Mbps,2-5 PoE port rate of

10 Mbps, the farthest distance

is 250m, communicate with

each other

Network Media

10Base-T: UTP 5e and

above cable (maximum 250m)

100Base-Tx: UTP category 5,

5e cable (maximum 100m)

Transfer Method

Store-and-Forward

MAC Address Table

Switching Capacity

1Gbps

Packet Forwarding Rate

0.744 Mpps

PoE Ports(RJ45)

4x PoE ports compliant with

802.3at/af

Power Pin Assignment

4/5(+), 7/8(-)

PoE Budget

60W

LED

indicators

Per Port

Link/Act: Green PoE: Orange

Per Device

Power: Green

Power Supply

DC 53.5V,1.2A External Power

Power Consumption

Maximum (PoE on):

66.5W (220V/50Hz)

Dimensions (W x D x H)

89.3*81.7*21.3mm

Environment



Operating Temperature:

0℃- 45℃

Storage Temperature:

-40℃- 70℃

Operating Humidity:

10%~90% RH non-condensing

Storage humidity:

5%~90% RH non-condensing

1.4 External Component Description

Front Panel

The front panel of the Switch consists of one power LED

indicator, five Link/Act LED indicators, four PoE LED indicators

and one slide switch as shown as below.

Default/Extend mode switch:

It can through the front panel of the slide switch to switch

working mode. When switch to Extend mode, 2-5 port rate

negotiation into 10 Mbps, Data transmission and power

supply can reach as far as 250 meters.

You can with LED indicator quickly judge the Switch work, help

diagnose problems in the Switch or the connected devices.

LED indicator as shown below:

LED indicators:

The LED Indicators will allow you to monitor, diagnose and

troubleshoot any potential problem with the Switch,

connection or attached devices.

The following chart shows the LED indicators of the Switch

along with explanation of each indicator.

LED

Indicator

Faceplate

Marker

Status Indication

Power

Indicator PWR

Off Power Off

Solid

green

Power On

10/100

BASE-T

adaptive

Ethernet

port

indicators

(1-5)

Link/Act

Off

The port is

NOT connected.

Solid

green

The port is connected,

but no data is

transmitting or

receiving.

Blinking

The port is transmitting

or receiving data.

PoE status

indicators

(2-5)

PoE

Off

No PD is connected to

the corresponding port,

or there is a

breakdown.

Solid

orange

A Powered Device is

connected to the port,

which supply power

successfully.

Blinking

The PoE power current

may be overloaded

Rear Panel

The rear panel of the Switch consists of 5 x 10/100Mbps RJ-

45 ports and a power connector as shown as below.

10/100Mbps RJ-45 ports (1~5):

Designed to connect to the device with a bandwidth of

10Mbps or 100Mbps. Each has a corresponding 10/100Mbps

LED, port2~port5 support PoE power supply function, each

has a corresponding PoE LED.

UP-link port:

Up-link port as an automatic flip cascade port, can be used

with the other 4 RJ-45 ports, the port corresponds to the

Link/Act indicator.

Power Connector:

Power is supplied through an external DC power adapter. It

supports 53.5V DC.

2. Installing and Connecting the Switch

This part describes how to install your PoE Ethernet Switch

and make connections to it. Please read the following topics

and perform the procedures in the order being presented.

2.1 Installation

Please follow the following instructions in avoid of incorrect

installation causing device damage and security threat.

Put the Switch on stable place or desktop in case of

falling damage.

Make sure the Switch works in the proper DC input and

matches the voltage labeled on the Switch.

To keep the Switch free from lightning, do not open the

Switch's shell even in power failure.

Make sure that there is proper heat dissipation from and

adequate ventilation around the Switch.

Make sure the cabinet to enough back up the weight of

the Switch and its accessories.

2.2 Desktop Installation

When installing the Switch on a desktop, please attach these

cushioning rubber feet provided on the bottom at each

corner of the Switch in case of the external vibration. Allow

adequate space for ventilation between the device and the

objects around it.

2.3 Power on the Switch

The Switch connected an external power adapter power

53.5V/1.2A supply, make sure you use the proper power

supply.

2.4 Connect Computer (NIC) to the Switch

Please insert the NIC into the computer, after installing

network card driver, please connect one end of the twisted

pair to RJ-45 jack of your computer, the other end will be

connected to any RJ-45 port of the Switch, the distance

between Switch and computer is around 100 meters. Once

the connection is OK and the devices are power on normally,

the LINK/ACT status indicator lights corresponding ports of

the Switch.

2.5 Switch connection to the PD

2~5 port of the Switch have PoE power supply function, the

maximum output power of single port up to 30W, it can make

PD devices, such as internet phone, network camera, wireless

access point work. You only need to connect the Switch PoE

port directly connected to the PD port by network cable.

Hereby Assmann Electronic GmbH, declares that the Declaration of

Conformity is part of the shipping content. If the Declaration of

Conformity is missing, you can request it by post under the below

mentioned manufacturer address.

www.assmann.com

Assmann Electronic GmbH

Auf dem Schüffel 3

58513 Lüdenscheid

Germany

Tabla de contenidos

Otros manuales de Cambiar de Digitus

Digitus

Digitus DN-80201 Manual de usuario

Digitus

Digitus DA-70222 Manual de usuario

Digitus

Digitus DS-40136 Manual de usuario

Digitus

Digitus DA-70240 Manual de usuario

Digitus

Digitus DS-11403 Manual de usuario

Digitus

Digitus DS-45341 Manual de usuario

Digitus

Digitus DS-12901 Manual de usuario

Digitus

Digitus DN-95301 Manual de usuario

Digitus

Digitus DA-70135-3 Manual de usuario

Digitus

Digitus DA-70244 Manual de usuario

Digitus

Digitus DN-650105 Manual de usuario

Digitus

Digitus DS-12800 Manual de usuario

Digitus

Digitus DN-652120 Manual de usuario

Digitus

Digitus DS-48304 Manual de usuario

Digitus

Digitus DS-45320 Manual de usuario

Digitus

Digitus DS-45305 Manual de usuario

Digitus

Digitus DA-70242-1 Manual de usuario

Digitus

Digitus DN-95357 Manual de usuario

Digitus

Digitus DA-70255 Manual de usuario

Digitus

Digitus DN-80202 Manual de usuario

Digitus

Digitus 16 PORT GIGABIT ETHERNET NETWORK SWITCH Manual de usuario

Digitus

Digitus DC IC812I-MC Manual de usuario

Digitus

Digitus DN-651129 Manual de usuario

Digitus

Digitus DN-80068 Manual de usuario

Manuales populares de Cambiar de otras marcas

URC

URC Total Control MFS-8 Manual de usuario

Azbil

Azbil HPQ-D11 Manual de usuario

Sony

Sony DFS-900M Manual de usuario

SICK

SICK i17S Manual de usuario

F&F

F&F SZR-277 Manual de usuario

Shure

Shure UAMS/BK Manual de usuario

Dräger

Dräger X-zone Switch Off Manual de usuario

Asco

Asco Joucomatic 349 Series Manual de usuario

BT Mini Hub Manual de usuario

D-Link

D-Link DES-1226G Manual de usuario

Johnson Controls

Johnson Controls FS80-C Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manual de usuario

MicroNet

MicroNet SP1200A Manual de usuario

Ruijie

Ruijie RG-PF2920 Series Manual de instalación y funcionamiento

Altinex

Altinex DA1914SX Manual de usuario

MiLAN

MiLAN MIL-SM2401M Manual de usuario

RJM

RJM MASTERMIND PBC/6X Manual de usuario

Atlas

Atlas MMK-KVM8 Manual de usuario