Digitus DS-55101 Manual de usuario

HDMI Extender Set

Full HD, 130 m

Manual

DS-55101

The Digitus HDMI Extender Set, Full HD offers an extender solution of up to 130 m

for the highest demands. It is used to transmit digital video and audio signals to a

maximum distance of up to 130 m (via CAT 6). The highest supported video

resolution is 1080p / 60Hz. CAT 5, CAT 5E and CAT 6 network cables are supported.

The package includes two infrared units (transmitter, receiver), which can be used

for the remote control of the connected input source. LED display shows the

connectivity.

Important Safety Notice

Please read below safety instructions carefully before installation and operation:

1. Do not hot plug when it is working.

2. Do not mix up the transmitter unit (TX) and the receiver unit (RX), IR blaster

extension cable and IR receiver extension cable before installation.

Feature

1. Plug and play, without installation.

2. Include a transmitter unit (TX) and a receiver unit (RX), working as a pair.

3. Transmission distance up to 120m via CAT6 cable, 100m via CAT5E cable, 80m

via CAT5 cable.

4. Support IR passback for remote control source device to receiver site easily.

5. Uncompressed and zero latency.

6. Support resolution is up to full HD 1080p@60Hz.

7. Compliant with CAT5/5e/6 for long distance transmission.

Package Contents

1x HDMI Extender transmitter unit

1x HDMI Extender receiver unit

2x Power Supply Unit: DC 5V/1A

1x IR transmitter unit

1x IR receiver unit

1x Instruction manual

Specification

Power

Supply

Voltage/Current DC5V/1A

Power consumption TX: 2W RX: <2W

HDMI

Performance

and Interface

HDMI compliance HDMI1.3

HDCP compliance HDCP1.4

HDMI resolution

720x576@50Hz,

720x480@60Hz,

1280x720@60Hz,

1920x1080@60Hz,

640x480@60Hz,

800x600@60Hz,

1024x768@60Hz,

1280x800@60Hz,

1280x1024@60Hz,

1440x900@60Hz,

1680x1050@60Hz

Supports audio formats PCM

Maximum transfer rate 10.2Gbps

Input and output TMDS signal 0.5~1.5Vp-p (TMDS)

Input and output DDC signal 5Vp-p(TTL)

Input cable length ≤8m (AWG24)

Output cable length ≤8m (AWG24)

CAT5 80m

CAT5E 100m

CAT6 130m

Protection

Level

Electrostatic protection of the

whole machine

1a contact discharge level 3,

1b air discharge level 3,

implementation of the

standard: IEC61000-4-2

Operating

Environment

Working temperature 0~60°C

Storage temperature -10~70°C

Humidity (no condensation) 0~90%

Body

Properties

Dimension 69.57(L) x 58.80 (W) x

16.10(H) mm

Material Aluminum alloy material +

crystal panel

Treatment process Grit blast

Color Black

Weight TX: 70g, RX: 70g

Installation Requirements

1. HDMI source device

(Computer graphics card, DVD, PS3, HD monitoring equipment etc.).

2. HDMI display device like SDTV, HDTV, and projector with HDMI port.

3. UTP/STP CAT5/5e/6 cable, follow standard IEEE-568B.

Penal Description

Transmitter unit (TX)

1) Reset button Restart the unit

2) RJ45 signal output Connect with network cable

3) LINK indicator LED turns on all the time with HDMI signal

transmission, flashes with no signal transmission

4) Power input Connect with DC5V1A power adapter

5) HDMI signal input Connect with source device

6) IR signal output Connect with IR blaster extension cable

Receiver unit (RX)

1) Reset button Restart the unit

2) RJ45 signal input Connect with network cable

3) LINK indicator LED turns on all the time with HDMI signal

transmission, flashes with no signal transmission

4) Power input Connect with DC5V1A power adapter

5) HDMI signal output Connect with display device

6) IR signal input Connect with IR receiver extension cable

Installation and Connection

A. How to make a CAT5/5E/6 network cable Follow the standard of IEEE-568B:

1. White and Orange

2. Orange

3. White and Green

4. Blue

5. White and Blue

6. Green

7. White and Brown

8. Brown

B. Connection

C. Connection

1) Connect source device to Transmitter unit (TX), and display device to Receiver

unit (RX) via HDMI cables

2) Connect Transmitter unit (TX) and Receiver unit (RX) via network cables

(CAT5, CAT5e or CAT6)

3) Plug the power supply to Transmitter and Receiver unit, each unit will power up

then initialize itself, this HDMI extender works

D. IR User Guide

1) IR blaster extension cable should plug in the IR OUT port of TX (Transmitter) unit

of HDMI extender, and the IR receiver extension cable should plug in the IR IN

port of the RX (Receiver) unit.

2) The emitter of IR blaster should as close as possible to the IR receiver window of

the signal source device.

3) Using the IR remote controller of the signal source device towards the IR receiver

(connected to the RX), to remote control source media playback.

DVD

HDMI IN Transmitter

IRIR

Receiver

HDMI Cable

HDMI Display

cable

•FAQ

Q: No image output?

A: 1) Check and make sure all cables are connected well;

2) Restart the TX/RX by “RESET” button.

Q: RX “LINK” indicator is flashing all the time?

A: 1) Make sure network cable connection follows the standard of IEEE568B;

2) Check whether transmitter has HDMI signal input;

3) Reset transmitter and receiver and reconnect.

Q: Receiver “LINK” led lights on all the time but no image output?

A: 1) Make sure the monitor supports the current HDMI signal mode

2) Make sure HDMI cable is well connected with TV

3) Make sure the network cable is fine copper wires.

This is a Class A product. In home environment, this product may cause radio interference. In

this case, the user may be required to take appropriate measures.

Hereby Assmann Electronic GmbH, declares that the Declaration of Conformity is part of the

shipping content. If the Declaration of Conformity is missing, you can request it by post

under the below mentioned manufacturer address.

www.assmann.com

Assmann Electronic GmbH

Auf dem Schüffel 3

58513 Lüdenscheid

Germany

Tabla de contenidos

Otros manuales de Extensor de Digitus

Digitus

Digitus DS-55519 Manual de usuario

Digitus

Digitus DS-55321 Manual de usuario

Digitus

Digitus DS-51201 Manual de usuario

Digitus

Digitus DS-55318 Manual de usuario

Digitus

Digitus DS-55506 Manual de usuario

Digitus

Digitus DS-55508 Manual de usuario

Digitus

Digitus DC-52101 Manual de usuario

Digitus

Digitus DN-95126 Manual de usuario

Digitus

Digitus DN-95127-1 Manual de usuario

Digitus

Digitus DS-53440 Manual de usuario

Digitus

Digitus DS-55500 Manual de usuario

Digitus

Digitus DS-55203 Manual de usuario

Digitus

Digitus DC-53101 Manual de usuario

Digitus

Digitus HDBaseT DS-55523 Manual de usuario

Digitus

Digitus DS-55126 Manual de usuario

Digitus

Digitus DC-56100 Manual de usuario

Digitus

Digitus DN-95121 Manual de usuario

Digitus

Digitus DS-55202 Manual de usuario

Digitus

Digitus DN-95123 Manual de usuario

Digitus

Digitus DS-55200 Manual de usuario

Digitus

Digitus DS-55300 Manual de usuario

Digitus

Digitus DS-55502 Manual de usuario

Digitus

Digitus DN-82060 Manual de usuario

Digitus

Digitus DN-95128-1 Manual de usuario

Manuales populares de Extensor de otras marcas

SY HDBT-60T Manual de usuario

Appsys ProAudio

Appsys ProAudio ADX-16 Manual de usuario

Atlona

Atlona RS232 Manual de usuario

IDK

IDK OPF-TH1000-A Manual de usuario

Enable-IT

Enable-IT 824WP Manual de usuario

Worx

Worx Landroid RadioLink WA0864 Hoja de especificaciones

TP-Link

TP-Link TL-WA730RE Manual de usuario

Camplex

Camplex CMX-HDMI-SFPL Manual de usuario

SC&T

SC&T HE03-4K Manual de usuario

Marmitek

Marmitek MegaView70 Manual de usuario

Samsung

Samsung SCS-26UC4 Manual de usuario

Foxun

Foxun SX-GES24 Manual de usuario

MuxLab

MuxLab 500771 Manual de usuario

foxunhd

foxunhd SX-AEX01 Manual de usuario

TERK Technologies

TERK Technologies LFIRX2 Manual de usuario

Devolo

Devolo Audio Extender Manual

Edimax

Edimax EW-7438RPn V2 Manual de usuario

Shinybow USA

Shinybow USA SB-6335T5 Manual de usuario