Digisol DG-GS1510HPEV2 Manual de usuario
DG-GS1510HPEV2 Use
r
Manual
DG-GS1510HPEV2
8 PORTS GIGA POE L2 SWITCH WITH 2 SFP PORTS
User Manual
V1.0
2016-08-18
1
DG-GS1510HPEV2 Use
r
Manual
As our products undergo continuous development the specifications are subject to change without prior notice
Web Management User Guide
COPYRIGHT
Copyright 2016 by Smartlink Network Systems Ltd. All rights reserved. No part of this publication
may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any
language or computer language, in any form or by any means, electronic, mechanical, magnetic,
optical, chemical, manual or otherwise, without the prior written permission of this company.
This company makes no representations or warranties, either expressed or implied, with respect to
the contents hereof and specifically disclaims any warranties, merchantability or fitness for any
particular purpose. Any software described in this manual is sold or licensed "as is". Should the
programs prove defective following their purchase, the buyer (and not this company, its distributor,
or its dealer) assumes the entire cost of all necessary servicing, repair, and any incidental or
consequential damages resulting from any defect in the software. Further, this company reserves the
right to revise this publication and to make changes from time to time in the contents thereof without
obligation to notify any person of such revision orchanges.
Trademarks:
DIGISOL™ is a trademark of Smartlink Network Systems Ltd. All other trademarks are the property
of the respective manufacturers.
Safety
This equipment is designed with the utmost care for the safety of those who install and use it.
However, special attention must be paid to the dangers of electric shock and static electricity when
working with electrical equipment. All guidelines of this and of the computer manufacturer must
therefore be allowed at all times to ensure the safe use of the equipment.
Web Management User Guide
Table of Contents
Contents
Chapter 1、WEB page introduction.............................................................................................. 2
1、Login dialog Box..............................................................................................................2
2、Main Page.........................................................................................................................3
3、System Configuration.......................................................................................................3
4、Port Configuration..........................................................................................................10
5、MAC binding..................................................................................................................18
6、MAC filtering................................................................................................................. 20
7、VLAN Configuration..................................................................................................... 21
8、SNMP Configuration......................................................................................................24
9、ACL Configuraion..........................................................................................................25
10、QoS Configuration....................................................................................................... 31
11、IP Basic Configuration................................................................................................. 32
12、Certification. Authorization. Accounting (AAA) configuration...................................35
13、PoE port configuration................................................................................................. 39
2
DG-GS1510HPEV2 User Manual
WEB Configuration operating manual
This manual focuses on describing the WEB page of the switch. The user can manage the switch through
WEB page. This manual only introduces the simple operations of the various WEB pages of the various
switches.
Chapter 1、WEB page introduction
Switch WEB pages are organized into groups, each including one or more of the WEB
pages. The following are introduced one by one on each page.
1、Login dialog Box
Figure 1 WEB browsing session of the login page
Figure 1 shows the login dialog box, the logon dialog box will be displayed while the user enters the web
page at the first time.(default IP address is 192.168.0.1/24). When the user fills out the correct user name and
Web Management User Guide
3
password, then clicks the Enter button, can log on to the switch Web server. Passwords are case-sensitive, the
anonymous user password can be a maximum of up to 16 characters, while the multi-user name and password
can be set up to 11 characters. Switch switch default user name is the anonymous user name admin, default
password for the anonymous user's password, the anonymous user's password is empty by default.
2、Main Page
Figure 2 shows the WEB main page of Switch. This page will be displayed after the user logs in the web
page.
Figure 2 Switch switches main page
3、System Configuration:
（1）
Basic information page
Web Management User Guide
4
Figure 3 is the basic configuration page, users can configure the basic information for the switch.
System Description displays the description of the relevant parameters of system.
System descriptor ID displays system in the network identity management.
The system version number displays the current software version number of switches.
The system start-up time displays switch’s time from switch start to the present time.
The system name is the switch’s system name in the network, the user can modify the system name.
The system location is the switch’s physical location in the network, the user can modify the system
location.
System Contact shows the contact person and details of the current node, the user can modify the system
contact.
Figure.3 Basic information Page
（2）
Serial port information pa
g
e
Figure 4 is a serial port configuration page, this page displays serial baud rate and other related
information. When the host,through the serial port terminals (such as Windows, HyperTerminal), connects to
switches then COM port configuration must be consistent with this page information.
Web Management User Guide
5
Figure 4 Serial port information page
（3）
User management page
Figure 5 is a user management page, the user can modify this switch anonymous user’s (admin)
password. Both Telnet, console use the same anonymous user's password. Passwords are case-sensitive, and
can be up to 16 characters. If you want to change your password, the user needs to enter the new password
twice, once the user clicks the apply button, the new password is activated, then if the switch is not enabled
multi-user, will display the login dialog box , require the user to re - login the web page, with a new anonymous
user password.
Web Management User Guide
6
Figure 5 user’s management page
（4）
Securit
y
Mana
g
ement Pa
g
e
Figure 6 is
Security
management configuration page. Using this configuration, , the administrator can
control network management services like TELNET, WEB and SNMP. You can switch on (enable) or off
(disable) this service. Also these services can be mapped with standards IP ACL group ,and the
implementation of the source IP address control, control access to the host of these services.
When the Switch default services TELNET, WEB and SNMP are open and no ACL filtering, then all hosts
have access to the switch using these three services. If the administrator for security, does not want to provide
oneormoreservices,itcanbeshutdown.
Web Management User Guide
7
Figure 6 Security management page
（5）
Confi
g
ure the current pa
g
e
Figure 7 is the current configuration page. the user can view the current configuration of the switch on this
page. Save button is to store the current system configuration in the configuration file. Because the storage
operation requires erasing & writing into the FLASH memory, it may take up some time. When the user was
configures the switch and restarts it after saving, then configurations are not lost.
Otros manuales para DG-GS1510HPEV2
1
Tabla de contenidos
Otros manuales de Cambiar de Digisol
Digisol
Digisol DG-GS4652S Manual de usuario
Digisol
Digisol DG-CS4554F Manual de usuario
Digisol
Digisol DG-FS1526 Manual de usuario
Digisol
Digisol DG-GS4900SE Series Manual de usuario
Digisol
Digisol DG-FS4526 Manual de programación
Digisol
Digisol DG-FS4526E Manual de programación
Digisol
Digisol DG-GS4110 Manual de usuario
Digisol
Digisol DG-GS1528HP/C Guía de inicio rápido
Digisol
Digisol MUSTANG 4000 DG-FS4528 Manual de usuario
Digisol
Digisol DG-GS4600SE2 Series Manual de usuario
Digisol
Digisol DG-CS4554F Manual de usuario
Digisol
Digisol DG-GS1528HP Manual de usuario
Digisol
Digisol DG-FS1510HPE Manual de usuario
Digisol
Digisol DG-GS4600 SERIES Manual de usuario
Digisol
Digisol DG-GS1010PF-B Manual de usuario
Digisol
Digisol DG-GS1016D-A Manual de usuario
Digisol
Digisol DG-FS4528P Manual de programación
Digisol
Digisol DG-GS1528HP/C Manual de usuario
Digisol
Digisol DG-GS4200 Series Manual de usuario
Digisol
Digisol DG-GS1510PL Manual de usuario
