digicon dGate UW900 Manual de usuario
dGate Product Manual Version 01
dGate SW
dGate UW
dGate Product Manual - Version 01
2
Revision Date Reviewer History
01 03/02/2022 • Ezequiel Kellerman
• Nicholas Hahn;
• Igor Cunha
• Leandro Dandolini
• New dGate manual
Copyright - Digicon S.A. Controle Eletrônico para Mecânica
All rights reserved. No part of this publication shall be reproduced, transmitted,
transcribed, led in a recovery system, or translated to any human or computer
language through electronic, magnetic, optical, chemical, or manual means, or
otherwise, without the express written permission of Digicon S.A.
Code: 069.31.275
Version: 01 - English
This manual was written by: Digicon S.A. Controle Eletrônico para Mecânica
Documentation Sector - EDS
“After the product’s lifespan, discard it according to the National Waste Policy.”
dGate Product Manual - Version 01
3
Revision Date Reviewer History
01 03/02/2022 • Ezequiel Kellerman
• Nicholas Hahn;
• Igor Cunha
• Leandro Dandolini
• New dGate manual
Obs.: If you wish to see the history of every version of this manual, get in touch with your representative or
with Digicon.
ATTENTION!: Digicon shall have the right to change its products’ characteristics
at any moment to adapt them to the most recent technological developments.
ATTENTION!: Digicon shall have the right to change the information contained
herein without prior notice.
dGate Product Manual - Version 01
4
Contents
1.Presentation ............................................................................................................7
2. Safety Instructions..................................................................................................8
2.1 Symbols .......................................................................................................8
2.2 Terminology .................................................................................................9
2.3 Risks .....................................................................................................9
2.3.1 Equipment unpacking risk ..............................................................10
2.3.2 Equipment installation risks............................................................10
2.3.3 Equipment use risks .......................................................................11
2.3.4 Equipment maintenance risks ........................................................12
2.3.5 Equipment cleaning process risks..................................................12
3. dGate’s Features..................................................................................................13
3.1 Functional description ................................................................................15
4. Unpacking, Installation, and Electric Connection .................................................17
4.1 Package opening .......................................................................................17
4.1.1 Package dimensions ......................................................................18
4.1.2 Necessary tools:.............................................................................18
4.1.3 Steps to open the package:............................................................19
4.1.4 Key parts of the product .................................................................22
4.2 Installation..................................................................................................24
4.2.1 Before installing your dGate, check................................................24
4.2.2 Positioning and xation on the oor ...............................................25
4.3 Access to dGate after xation ....................................................................30
4.4 Electric connection.....................................................................................31
4.4.1 Electric panel..................................................................................31
5. Interconnections ...................................................................................................33
5.1 Basic wiring................................................................................................34
5.2 Connection to the electric network.............................................................37
5.3 Connection of the control signals...............................................................38
dGate Product Manual - Version 01
5
6. Identication of the Internal Parts and Functionalities..........................................41
6.1 MCP control board .....................................................................................41
6.2 Pictograms .................................................................................................42
6.3 Sensor barriers ..........................................................................................44
6.4 Antipanic ....................................................................................................45
6.5 Functionalities ............................................................................................46
6.5.1. Anti-crush protection system .........................................................46
6.5.2 Door speed conguration ..............................................................47
6.5.3 Access control conguration with open doors ...............................48
6.5.4 Anti-crush protection system ..........................................................48
6.5.5 Passage timeout............................................................................50
6.5.6 Passage direction detection ...........................................................51
6.5.7 User return detection......................................................................51
6.5.8 Idle user detection ..........................................................................52
6.5.9 Gate trespassing detection.............................................................53
6.5.10 “Tailgating” user detection ............................................................53
6.5.11 Asset safety zone denition ..........................................................54
6.5.12 Passage authorization accumulation............................................55
7. Optional Items ......................................................................................................56
7.1 Card collector kit ........................................................................................56
7.2 Digicon MCA board ....................................................................................57
8. Maintenance.........................................................................................................58
8.1 Door ...........................................................................................................58
8.1.1 Calibration routine ..........................................................................59
8.2 Troubleshooting .........................................................................................61
8.3 Preventive maintenance ............................................................................62
8.3.1 Preventive action table ...................................................................62
dGate Product Manual - Version 01
6
9. Technical Characteristics......................................................................................65
9.1 Dimensions ................................................................................................65
9.2 Other information .......................................................................................68
10. Cleaning .............................................................................................................69
10.1 Stainless steel maintenance and conservation........................................69
10.2 Polycarbonate (door) maintenance and conservation .............................71
11. Warranty and Customer Support ........................................................................73
Notes:...............................................................................................................74
dGate Product Manual - Version 01
7
1.Presentation
When innovation meets robustness and design meets trustworthiness, you have the best
solution in access control. Every detail of Digicon’s solution was made to bring innovation,
quality, and design to the access control market. dGate was born in result of an intense
research process of world trends and an exhaustive engineering work.
Find out more about our products accessing our website using the QR Code below:
dGate Product Manual - Version 01
8
2. Safety Instructions
2.1 Symbols
You are going to nd the symbols below in the Product Manual. They point to important
Attention and Careful notications regarding equipment safety, installation, operation,
and maintenance.
ATTENTION!: Describes something important of which the qualied technical
person and the user should be aware.
CAREFUL - RISK OF LESION/INJURY!: Describes risk situations that may
lead to lesions and/or injuries.
CAREFUL - RISK OF DEATH!: Describes high risk situations that may lead
to death. These cases are related to the interaction with the internal part of the
equipment, and it is advisable to employ a qualied technical person.
Read and keep the instructions of this manual: Read and keep this Product Manual
for future reference. Read carefully all safety, unpacking, installation, operation, and
maintenance instructions before operating this equipment.
Follow the instructions and the attention and careful notications: Follow all
installation, operation/use, and maintenance instructions. Pay close attention to all
attention, careful, and precaution notications in the operation instructions, as well
those attached to this equipment. The attention and careful notications are essential
for the user’s and the qualied technical person’s protection and for the equipment’s
use longevity.
dGate Product Manual - Version 01
9
2.2 Terminology
The terms dened below are used in this document. These denitions are based on
those found in the safety standards:
Qualied Technical Person: The term qualied technical person is applied to people
trained and qualied by Digicon and that are allowed to install, replace, or provide
technical assistance to its equipment. It is recommended that the qualied technical
person may use his/her experience, technical skills, and good practice to avoid
possible injuries to him/herself and to others due to risks that exist in restrict access
areas. It should be done to mitigate risks and to increase the equipment’s lifespan.
ATTENTION!: IInstallations and/or maintenance performed by an unqualied
technician can make the equipment’s warranty void.
User: This term is applied to an individual that is not a qualied technical person and
that uses the equipment.
2.3 Risks
The safety information and notications below are made available to protect you from
injuries and to avoid damaging the equipment.
Children and people that require assistance may be unable to identify the risks
associated to the use of the equipment and can get hurt or put themselves in life-
threatening situations.
Be attentive also to animals that are close to the equipment.
dGate Product Manual - Version 01
10
The risks with which you should be attentive in several situations are listed below.
2.3.1 Equipment unpacking risk
ATTENTION!:
• Always use the proper tools;
• Always use the required PPEs (gloves, shoes, and safety goggles).
CAREFUL - RISK OF LESION/INJURY!:
• Be careful while handling the equipment package because it is made out of wood
and may have splinters;
• The package is heavy, so do not let it drop because it could cause injuries and
damage the equipment;
• Thin steel sheets are used to make the package and they can cause cuts and
wounds;
• Be careful while lifting the cover of the package because it can fall and cause
injuries and damage the equipment;
• To unscrew the equipment from the package’s base, remove the side glass doors.
Handle them carefully, placing them in a safe spot;
• Be careful with your hands and feet while removing the equipment from the
package’s base and positioning it on the installation spot
2.3.2 Equipment installation risks
ATTENTION!:
• All installation steps should be performed by a qualied technical person and
the proper tools and PPEs should be used;
• Before connecting it to the electrical grid, carefully inspect the installation.
Este manual sirve para los siguientes modelos
6
Tabla de contenidos
Otros manuales de Torniquete de digicon
digicon
digicon Turnstile Duo Manual de usuario
digicon
digicon CATRAX Plus Manual de usuario
digicon
digicon CATRAX Plus Manual de usuario
digicon
digicon Catrax clip Manual de usuario
digicon
digicon dflow Manual de usuario
digicon
digicon dflow Manual de usuario
digicon
digicon dGate AW Manual de usuario
digicon
digicon catrax master Manual de usuario
