digicon CATRAX Plus Manual de usuario
1
1
Product Manual
plus
2
2
3
3
Copyright– Digicon S.A.
Controle eletrônico para Mecânica – 2018
All rights reserved. No part of this publication may be reproduced, transmitted,
transcribed, stored in a retrieval system, translated into any language or computer
language in any electronic, magnetic, optical, chemical, manual way, or otherwise,
without the express written permission from Digicon S.A.
Code: 069.31.252
Version: 08
English
This manual was elaborated by: Digicon S.A. Controle eletrônico para Mecânica
Documentation Sector - EDS
plus
“At the end of a product's life cycle dispose according with local policy” .
4
4
Contents
1.Important instructions .......................................................................................
2.Orientations .....................................................................................................
3.Introduction .....................................................................................................
4.Features of Catrax Plus.......................................................................................
4.1Catrax Plus Operation.......................................................................................
5.Installing/Assembling Catrax Plus .......................................................................
5.1 Unboxing ......................................................................................................
5.2 Floor drilling ..................................................................................................
5.3 Colum fixation ...............................................................................................
5.4 Assembling arms and covers ............................................................................
5.5 Access to Catrax Plus after assembling ..............................................................
5.5.1 Rear cover ..................................................................................................
5.5.2 Frontal cover...............................................................................................
5.5.3 Column cover ..............................................................................................
6. Optional items .................................................................................................
6.1 Collecting box kit ...........................................................................................
6.2 Pictogram kit.................................................................................................
6.3 Power supply .................................................................................................
6.4 Control board .................................................................................................
6.4.1Inputs .........................................................................................................
6.4.1.1 Connection scheme ...................................................................................
6.4.1.2 Pictogram ................................................................................................
6.4.1.3 Pictogram's connection..............................................................................
6.4.2 Configuration of control board – Switch Ds1 ....................................................
6.4.3 Outputs ......................................................................................................
6.4.3.1 Return signals...........................................................................................
6.4.3.2 Electromagnets .......................................................................................
6.4.3.3 Sound alarm ............................................................................................
6.4.4 Examples of some configurations...................................................................
6.5 Anti-panic system ...........................................................................................
6.5.1 Power connection .........................................................................................
6.5.2 Assembling the arms ....................................................................................
6.5.3 Maintenance test..........................................................................................
7. Maintenance ....................................................................................................
7.1 Preventive and corrective routine maintenance ..................................................
7.2 Defects and possible causes............................................................................
8. Technical characteristics....................................................................................
8.1 Dimensions ...................................................................................................
8.2 Other information ..........................................................................................
9. Cleaning .......................................................................................................
9.1 Maintenance and conservation of stainless steel ................................................
10. Warranty and technical assistance ....................................................................
plus
05
06
06
07
08
09
09
10
10
11
13
13
13
14
15
16
16
17
19
20
22
23
23
23
23
24
24
24
24
25
26
27
27
28
29
29
31
32
32
33
33
35
5
1. Important instructions
You can see, below, the symbols that will appear in this manual, signaling important
moments. It is essential to pay attention to them.
TIP: Indicates something Digicon considers important.
CAUTION: Indicates a moment of extreme caution when
handling the equipment/product.
ATTENTION: Indicates a moment when your observation
skills should be extremely productive.
INFORMATION: Presents interesting facts about the
purchased product.
QR CODE: Presents additional information or links with more details
about the presented text.
plus
6
2. Orientations
Read the information and instructions of this manual carefully, before using the
product. This ensures the correct use of the equipment and maximum use of its
technical features as well as a prolonged service life.
This product does not present sealing against the rain, that is, it is designed to be used
indoors.
Keep this manual for future consultations.
Digicon reserves its right to alter its products at any moment to adapt them to more
recent technical advancements.
Digicon maintains its right to alter the information contained in this manual without
previous notice.
Digicon does not provide any contractual warranty concerning the information in this
manual, and cannot be held responsible for errors it may contain and problems due to
its use.
The information contained in this manual is exclusive property of Digicon and is
protected by copyright laws.
This manual cannot be reproduced, photocopied or translated, in its entirety or in
part, into any kind of medium, without Digicon's written consent.
3. Introduction
Following a new technological concept focused on solidity and reliability and counting
with innovative design elements, with color variety and widely curved lines, Digicon has
launched the line CATRAX Plus.
CATRAX Plus serves most technologies of access control currently available, becoming
the best option in the market for access control. This manual presents a detailed
description of the components and working of .CATRAX Plus
To see our complete catalogue, visit www.digicon.com.br.
plus
7
4. Features of Catrax Plus
CATRAX Plus, an access controller in the model mini turnstile (column type), presents
three bidirectional, equidistant arms at 120 degrees with brushed stainless steel (AISI
304) finishing.
The column can present external finishing in brushed stainless steel (AISI 304) or
1020 carbon steel with electrostatic painting in black epoxy powder.
It has reinforced structure, fully rounded corners, and non-exposed screws, offering
space and comfort for any access control solution. It also has room for no-break and
collecting box (optional items)
Aiming at facilitating assembly and maintenance, the column presents aCATRAX Plus
U-shaped internal support (mounting rack) with standard holes for the fixation of
additional electronic boards. Moreover, the clients, according to their needs, can add
additional holes. Access to the mounting rack is done through a key with secret, whose
removal and insertion are extremely easy.
A plastic cover and a stainless steel sheet compose the upper panel. The cover, made of
injected plastic, can be purchased in the colors green, burgundy, or black or in any
other color desired, on demand. Optionally, the cover can present a slot for the reading
of magnetic cards/badges and barcodes.
The upper cover in stainless steel allows easy configuration and low-cost customization
of the product. The sheet can also present slots for optional items, such as pictogram,
collecting box input, display kit (separate manual), or a combination of these items.
The following images show some of the options.
Besides compatibility with most available technologies, Digicon can provide the
following optional items: collecting kit with box, pictogram kit, counter kit, power
supply, and control board, no-break, and display kit (separate manual). These items
are better described in section 6.1 Installing/Assembling optional items.
plus
8
4.1 Catrax Plus operation
In the basic mechanism, has a two-dimensional rotation system with twoCATRAX Plus
12 V electromagnets for activating the locks and two optical sensors that can provide the
signal for the activation of the electromagnets and passage clearance.
In the electronic model, which includes a microprocessor control board (optional), a
signal enabling passage is sent through one of the inputs, depending on the passage
direction. If this signal is recognized, the equipment will allow the turning of the arm of
CATRAX Plus. After half of the turning is complete (60 degrees), a 400 milliseconds
returning signal will be sent, informing the passage direction. After the signal, the arm
cannot be returned to the previous position.
Depending on the model and configuration, if the passage is forcedCATRAX Plus
without the enabling signal, an electromagnet will be activated to prevent turn. In
addition, the equipment can emit a signal for a sound alarm and/or the exhibition of a red
X on the upper panel display (models with pictogram). In this case, a return signal will be
sent, indicating that the turnstile was forced, informing the direction of turn.
plus
9
5.1 Unboxing
As the items inside the package can vary (depending on the client's requests), it is
important to perform a cautious visual inspection before installing and assembling the
turnstile. A checklist that works as a guide during inspection accompanies all Digicon
packages.
See below the parts that can compose :CATRAX Plus
plus
Left to right direction
Right to left direction
ATENTION: To avoid losses, the screws and the wrenches used for
assembling the are attached to the box containing theCATRAX Plus
arms. Before discarding the packing materials (cardboard and plastics),
make sure all the items in the checklist are accounted for.
Arm
Column door
Lock
Cables passage
Column
Column
door’s lock
Plastic
cover kit
Rear stainless
steel sheet
Pictograma kit
(optional)
5. Installing/Assembling Catrax Plus
plus
10
5.2 Floor drilling
Before installing , check:CATRAX Plus
1. The place chosen for the installation.
2. If there is a power source or electric socket nearby (ducts for connection).
3. If the place chosen is adequate for the installation of the access controller (indoors).
4. If there will be enough space (minimum 5 cm) between the rear of the CATRAX Plus
column and the wall. This space is important in order to provide access to the upper
panel and plug's locks for the cables passage.
5. If there will be enough space for the arms after CATRAX Plus is assembled.
6. If the floor is in conditions to receive anchor bolts (minimum of 4 cm of FCK15 M.P.A.
concrete or equivalent).
5.3 Column fixation
To fixate the column to the floor, observe the following steps and the indicated images:
1. drill the floor with 3/8” drills (then use a 12mm or the ½” drill). Make four external
holes, according to the measures indicated in the image below:
ATENTION: Since the installation requires floor drilling, it isCATRAX Plus
important that the location be chosen carefully.
plus
INFORMATION: The measures presented in this manual are in millimeters
and inches.
12,5 (4x)
210 (8,267")
170 (6,692")
78
(3,070")
36
(1,417")
Saída de cabos
92,5
(3,641")
32 (1,259")
20 (0,787")
Furação
de fixação
51 (2,007")
79,5
(3,129")
160 (6,299")
Otros manuales para CATRAX Plus
1
Tabla de contenidos
Otros manuales de Torniquete de digicon
digicon
digicon dGate UW900 Manual de usuario
digicon
digicon CATRAX Plus Manual de usuario
digicon
digicon Catrax clip Manual de usuario
digicon
digicon dflow Manual de usuario
digicon
digicon Turnstile Duo Manual de usuario
digicon
digicon dflow Manual de usuario
digicon
digicon catrax master Manual de usuario
digicon
digicon dGate AW Manual de usuario
