Denso QS20P-A Manual de usuario
2D Code Scanner
AC Adapter Driven
QS20P-A
User's Manual
Copyright © DENSO, 2000
All rights reserved. No part of this publication may be reproduced in any form or
by any means without permission in writing from the publisher.
Specifications are subject to change without prior notice.
■DENSO WAVE INCORPORATED does not assume any product liability arising
out of, or in connection with, the application or use of any product, circuit, or
application described herein.
■Intellectual Property Precaution
DENSO WAVE INCORPORATED ("DENSO WAVE") takes reasonable precau-
tions to ensure its products do not infringe upon any patent of other intellec-
tual property rights of other(s), but DENSO WAVE cannot be responsible for
any patent or other intellectual property right infringement(s) or violation(s)
which arise from (i) the use of DENSO WAVE's product(s) in connection or in
combination with other component(s), product(s), data processing system(s)
or equipment or software not supplied from DENSO WAVE; (ii) the use of
DENSO WAVE's products in a manner for which the same were not intended
nor designed; or (iii) any modification of DENSO WAVE's products by other(s)
than DENSO WAVE.
Licensed under one or more of the following U.S. patents:
4,570,057 4,766,300 4,894,523 5,021,642 5,038,024
5,081,343 5,095,197 5,144,119 5,144,121 5,182,441
5,187,355 5,187,356 5,218,191 5,233,172 5,258,606
5,288,985
All products and company names mentioned are trademarks or registered trade-
marks of their respective holders.
i
Preface
Please READ through these operating instructions carefully. It will enable you to
operate your QS20P-A correctly.
After you have finished reading the instructions, keep this manual handy for
speedy reference.
ii
Meaning of Symbols
A triangle ( ) with a picture inside alerts you to a warning of danger.
Here you see the warning for electrical shock.
A diagonal line through a circle ( ) alerts you to something you
should not do; it may or may not have a picture inside. Here you see a
screwdriver inside the circle, meaning that you should not disassemble.
A black circle ( ) with a picture inside alerts you to something you
MUST do. This example shows that you MUST unplug the power cord.
SAFETY PRECAUTIONS
Be sure to observe all these safety precautions.
■Please READ through this manual carefully. It will enable you to use the
QS20P-A correctly.
■Always keep this manual nearby for speedy reference.
Strict observance of these warning and caution indications are a MUST for
preventing accidents which could result in bodily injury and substantial property
damage. Make sure you fully understand all definitions of these terms and
related symbols given below, before you proceed to the text itself.
WARNING Alerts you to those conditions which could cause
serious bodily injury or death if the instructions
are not followed correctly.
CAUTION Alerts you to those conditions which could cause
minor bodily injury or substantial property dam-
age if the instructions are not followed correctly.
iii
WARNING
IMPORTANT: To system engineers
•When designing systems such as medicine management system
that could affect people's lives, take potential dangers into serious
consideration and make redundancy systems and safety engineer-
ing which render those dangers even if data is entered incorrectly.
•If smoke, abnormal odors or noises come from the QS20P-A, im-
mediately turn off the power, unplug the AC adapter from the wall
socket, and contact your nearest dealer.
Failure to do so could cause fire or electrical shock.
•If foreign material or water gets into the QS20P-A, immediately
turn off the power, unplug the AC adapter from the wall socket,
and contact your nearest dealer.
Failure to do so could cause fire or electrical shock.
•If you drop the QS20P-A so that it fails to operate or its housing
gets damaged, immediately turn off the power, unplug the AC
adapter from the wall socket, and contact your nearest dealer.
Failure to do so could cause fire or electrical shock.
•Never bring any metals or conductive materials into contact with
the output terminals.
Doing so could produce a large current through the QS20P-A,
resulting in heat or fire, as well as damage to the QS20P-A.
•Keep the QS20P-A away from water or moisture.
Getting the QS20P-A wet could result in a fire or electrical shock.
•Use the furnished AC adapter only. Failure to do so could result in
fire.
•Never use the QS20P-A on the line voltage other than the specified
level. Doing so could cause the QS20P-A to break or burn.
•Do not use the QS20P-A where any inflammable gases may be
emitted; doing so could cause fire.
iv
WARNING
•Do not scratch, modify, bend, twist, pull, or heat the power cable of
the AC adapter. Do not place heavy material on the cable or allow
the cable to get pressed under heavy material.
Doing so could break the cable, resulting in a fire.
•If the power cable of the AC adapter is damaged (e.g., exposed or
broken lead wires), stop using it and contact your nearest dealer.
Failure to do so could result in a fire or electrical shock.
•Do not subject the scanning window of the QS20P-A to direct
sunlight for extended periods.
Doing so could damage the QS20P-A, resulting in a fire.
Never
disassemble
CAUTION
•Do not put the QS20P-A on an unstable or inclined plane.
It may drop, creating injuries.
•Never put the QS20P-A in places where there are excessively high
temperatures, such as inside closed-up automobiles, or in places
exposed to direct sunlight.
Doing so could affect the housing or parts, resulting in a fire.
•Avoid using the QS20P-A in extremely humid or dusty areas, or
where there are drastic temperature changes.
Moisture or dust will get into the QS20P-A, resulting in malfunc-
tion, fire or electrical shock.
•Do not place the QS20P-A anyplace where it may be subjected to
oily smoke or steam, e.g., near a cooking range or humidifier.
Doing so could result in a fire or electrical shock.
•Never disassemble or modify the QS20P-A; doing so could result
in an accident such as fire or electrical shock.
v
CAUTION
•If you will not be using the QS20P-A for a long time, be sure to
unplug the AC adapter from the wall socket for safety.
Failure to do so could result in a fire.
•Never cover or wrap up the QS20P-A or AC adapter in a cloth or
blanket.
Doing so could cause the unit to heat up inside, deforming its
housing, resulting in a fire.
Always use the QS20P-A and AC adapter in a well-ventilated area.
•Keep the power cable away from any heating equipment.
Failure to do so could melt the sheathing, resulting in a fire or
electrical shock.
•Do not insert or drop foreign materials such as metals or anything
inflammable through the openings (vents or scanning window)
into the QS20P-A.
Doing so could result in a fire or electrical shock.
•Do not scratch or modify the QS20P-A or its interface cable. Do not
bend, twist, pull, or heat the cable.
Doing so could damage the QS20P-A or its interface cable, creating
a fire hazard.
•Do not put heavy material on the QS20P-A or its interface cable, or
allow the cable to get pressed under heavy material.
•Do not look into the light source from the scanning window of the
QS20P-A or do not point the scanning window at other people’s
eyes.
Eyesight may be damaged by direct exposure to this light.
•Do not use the QS20P-A if your hands are wet or damp.
Doing so could result in an electrical shock.
vi
CAUTION
•Never use chemicals or organic solvents such as benzene and
thinner to clean the housing. Do not apply insecticide to the
QS20P-A.
Doing so could result in a marred or cracked housing, electrical
shock or fire.
•When disconnecting the AC adapter from the wall socket, hold the
AC adapter body not the power cable.
The power cable may be broken, resulting in a burnt AC adapter,
electrical shock, or fire.
•During electrical storm activity, always unplug the AC adapter
from the wall socket.
Exposure to power surges could result in a damaged QS20P-A or
fire.
•When taking care of the QS20P-A, unplug the AC adapter from the
wall socket for safety.
Failure to do so could result in an electrical shock.
•If the interface cable is damaged (e.g., exposed or broken lead
wires), stop using it and contact your nearest dealer.
Failure to do so could result in a fire or electrical shock.
•Keep the QS20P-A away from water, dust or dirt.
Use of the QS20P-A after water, dust or dirt gets into it will emit
smoke or cause fire. Turn off the power, unplug the AC adapter
from the wall socket, and contact your nearest dealer.
•Do not drop the QS20P-A.
Doing so will break its housing, resulting in bodily injuries. Turn
off the power, unplug the AC adapter from the wall socket, and
contact your nearest dealer.
vii
PROPER CARE OF QS20P-AAND ITS ACCESSORIES
Clean the housings of the QS20P-A and its accessories with a dry, soft cloth.
•Never use benzene, alcohol, or other organic solvents. The housings may be
marred or the paint may come off.
•If the QS20P-A or its accessories become smudged, moisten a soft cloth with
neutral detergent diluted with water and wring it out thoroughly. Wipe the
QS20P-A or its accessories with the cloth and then go over it again with a dry
cloth.
Dust or dirt accumulating on the clear plate of the scanning window will affect
reading performance. If you use the QS20P-A in dusty areas, therefore, periodi-
cally check the clear plate of the scanning window and clean it if dusty.
•To clean the plate, first blow the dust away with an air brush. Then wipe the
plate with a cotton swab or the similar soft one gently.
•If sand or hard particles have accumulated, never rub the plate; doing so will
scratch or damage it. Blow the particles away with an air brush or a soft brush.
viii
FCC Regulations
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are de-
signed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in ac-
cordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his own expense.
FCC WARNING: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equip-
ment.
Canadian Interference-Causing Equipment Regulations
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du
Canada.
Tabla de contenidos
Otros manuales de Lector de código de barras de Denso
Denso
Denso BHT-604BW Manual de usuario
Denso
Denso BHT-1505B Manual de usuario
Denso
Denso SE1-BB Manual de usuario
Denso
Denso GT10B-SU Manual de usuario
Denso
Denso BHT-1600 Manual de usuario
Denso
Denso BHT-300BWB Manual
Denso
Denso Power Net Terminal BHT-103 Manual de usuario
Denso
Denso BHT-7000 Manual de usuario
Denso
Denso BHT-300B Manual de usuario
Denso
Denso AT27Q-SB Manual de usuario
Denso
Denso BHT-7000 Manual de usuario
Denso
Denso BHT-7500S Manual de usuario
Denso
Denso GT10B-SB Manual de usuario
Denso
Denso BHT-202Q-CE Manual
Denso
Denso GT10B-SM Manual de usuario
Denso
Denso BHT-1400QWB-CE Manual de usuario
Denso
Denso BHT-6000 Manual de usuario
Denso
Denso BHT-604B Manual de usuario
Denso
Denso BHT-4000 Manual de usuario
Denso
Denso BHT-302B Manual de usuario
