Denso BHT-700BB-CE Manual
BHT-700BB-CE
BHT-700BWB-CE
BHT-700BWBG-CE
Introduction
Preparation
Using the BHT
Charging
Troubleshooting
■Usage Precautions ..................................1
■Wireless Equipment.................................3
■Product Contents Check..........................4
■Proper Care of the BHT...........................6
■Components and Functions.....................7
■Input Method..........................................15
■Preparation ............................................16
■Step 1 Charging.....................................16
■Step 2 Attaching the Stylus ....................21
■Step 3 Turning ON the Power................22
■Scanning Barcodes ...............................25
■Turning ON/OFF the Backlight ..............27
■Changing the Default Settings ...............29
■Transmitting Data ..................................35
■Battery Power Level Indicator................41
■Replacing the Battery Cartridge.............42
■Using the BHT after Long Periods .........45
■Resetting and Full Resetting..................46
■Troubleshooting Guide...........................48
Operator’s Guide
Thank you for using the BHT-700BB-CE/BHT-700BWB-CE/BHT-700BWBG-CE
DENSO WAVE Barcode Handy Terminal. (BHT-700BB-CE and BHT700BWBG-CE
can't be used in North America)
Please read this manual thoroughly prior to operation to ensure full use of the
product’s functionality, and store safely in a convenient location for quick reference
even after reading.
This manual contains only the basic details required for operation.
Please refer to the User’s Manual for further details on general operation.
The User’s Manual can be downloaded free of charge from the DENSO WAVE Web
site (QBnet).
Microsoft, ActiveSync, Windows and the Windows logo are trademarks or registered
trademarks of Microsoft Corporation of the US or other countries.
Bluetooth®is a trademark owned by its proprietor. DENSO WAVE uses Bluetooth®
wireless technology under license.
Other company names or product names contained in this manual are trademarks or
registered trademarks of their respective holders.
The latest precision manufacturing technology yields LCD panels with an effective
resolution of 99.99% or higher. The downside, however, is that up to 0.01% of the
pixels can remain permanently dark or lit on today's state-of-the-art panels.
A thin Newton's ring (rainbow-like patterns) may appear on the touch panel.
This does not necessarily indicate a problem with the touch panel.
About this Manual
●Due to improvements and so on, the content of this manual may be subject to
change without prior notice.
●The reproduction or duplication of the whole or part of this manual is strictly
prohibited without prior consent.
●Please contact DENSO WAVE if this manual is lost.
●Every attempt has been made to ensure that the content of this manual is
thorough and up to date, however, we kindly ask that any questionable content,
mistakes, or omissions be reported to DENSO WAVE.
Related Manuals
The following manuals can all be downloaded free of charge from the DENSO WAVE
Web site (QBnet).
•BHT-710BB-CE/710BWB-CE/BHT-710BWB-CE User’s Manual
This manual contains detailed instructions for use of the
BHT-710BB-CE/710BWB-CE handy terminals and communication unit (CU-700).
•BHT-710-CE API Reference Manual
This manual contains instructions for developing application programs for the
handy terminal in Microsoft eMbedded Visual C++ 4.0.
•BHT-710-CE Class Library Reference Manual
This manual contains instructions for developing application programs for the
handy terminal in Microsoft Visual BASIC and Microsoft Visual C#.
Liability Limitations
•DENSO WAVE INCORPORATED does not assume any product liability (including
damages for lost profits, interruption of operations, or the loss of business-related
information) arising out of, or in connection with, the use of, or inability to use the
BHT system software or related manuals.
•DENSO WAVE INCORPORATED ("DENSO WAVE") takes reasonable precautions
to ensure its products do not infringe upon any patents or other intellectual property
rights of other(s), however, DENSO WAVE cannot be responsible for any patent or
other intellectual property right infringement(s) or violation(s) arising from any of
the following.
(1) The use of DENSO WAVE's products in connection or in combination with
other components, products, devices, data processing systems or software
not supplied by DENSO WAVE.
(2) The use of DENSO WAVE's products in a manner for which they were not
intended nor designed.
(3) The modification of DENSO WAVE's products by parties other than DENSO
WAVE.
•If it is judged by DENSO WAVE INCORPORATED that malfunction of the product
is due to the product having been dropped or subjected to impact, repairs will be
made at a reasonable charge even within the warranty period.
Customer Registration
To allow us to provide our customers with comprehensive service and support, we
request that all customers complete a Member Registration Form. Registered
members will be offered the following privileges.
•The latest upgrade information
•Free exhibition and event information for new products
•Free Web-information service "QBnet."
QBnet Service Contents
Information searching
service (FAQ) Offers detailed information on each product.
Download service Offers downloads of repair modules for the latest BHT
Series systems or software, and sample programs.
E-mail inquiries Product related queries can be sent in by e-mail.
* Please note that these privileges may be subject to change without prior notice.
How to Register
Access the URL below and follow the instructions provided.
http://www.denso-wave.com/en/adcd/support/
SAFETY PRECAUTIONS
Be sure to observe all these safety precautions.
Strict observance of these warning and caution indications are a MUST for preventing
accidents which could result in bodily injury and substantial property damage. Make
sure you fully understand all definitions of these terms and related symbols given
below, before you proceed on to the text itself.
Alerts you to those conditions which could cause
serious bodily injury or death if the instructions are not
followed correctly.
Alerts you to those conditions which could cause
minor bodily injury or substantial property damage if
the instructions are not followed correctly.
Meaning of Symbols
A triangle ( ) with a picture inside alerts you to a warning of danger.
Here you see the warning for electrical shock.
A diagonal line through a circle ( ) alerts you to something you should
not do; it may or may not have a picture inside. Here you see a
screwdriver inside the circle, meaning that you should not disassemble.
A black circle ( ) with a picture inside alerts you to something you MUST
do. This example shows that you MUST unplug the power cord.
Handling the battery cartridge
•Never disassemble or heat the rechargeable battery cartridge, nor
put it into fire or water; doing so could cause battery-rupture or
leakage of battery fluid, resulting in a fire or bodily injury.
•Do not carry or store the battery cartridge together with metallic
ballpoint pens, necklaces, coins, hairpins, etc.
Doing so could short-circuit the terminal pins, causing the batteries to
rupture or the battery fluid to leak, resulting in a fire or bodily injury.
•Avoid dropping the battery cartridge or letting it undergo any shock or
impact.
Doing so could cause the batteries to break, generate heat, rupture
or burn.
•Never charge the rechargeable battery cartridge where any
inflammable gases may be emitted; doing so could cause fire.
•Only use the dedicated charger for charging the rechargeable battery
cartridge.
Using a different type of charger could cause battery-rupture or
leakage of battery fluid and result in a fire, bodily injury, or serious
damage to property.
Handling the BHT
• Do not poke at the eyes with the stylus that comes with the BHT.
Handling the rechargeable cartridge
•Never charge a wet or damp rechargeable battery cartridge.
Doing so could cause the batteries to break, generate heat, rupture
or burn.
Handling the BHT
•If smoke, abnormal odors or noises come from the BHT, immediately
turn off the power, pull out the battery cartridge, and contact your
nearest dealer.
Failure to do so could cause smoke or fire.
•If foreign material or water gets into the BHT, immediately turn off the
power, pull out the battery cartridge, and contact your nearest dealer.
Failure to do so could cause smoke or fire.
•If you drop the BHT so as to damage its housing, immediately turn off
the power, pull out the battery cartridge, and contact your nearest
dealer.
Failure to do so could cause smoke or fire.
•Do not use batteries or power sources other than the specified ones;
doing so could generate heat or cause malfunction.
Never
disas-
sembly
• Never disassemble or modify the BHT; doing so could result in an
accident such as break or fire.
• Never put the BHT in places where there are excessively high
temperatures, such as inside closed-up automobiles, or in places
exposed to direct sunlight.
Doing so could affect the housing or parts, resulting in a fire.
• Avoid using the BHT in extremely humid or dusty areas, or where
there are drastic temperature changes.
Moisture or dust will get into the BHT, resulting in malfunction, fire or
electrical shock.
• In environments where static electricity can build into significant
charges (e.g., if you wipe off the plastic plate with a dry cloth), do not
operate the BHT. Doing so will result in malfunction or machine
failure.
• Touch (tap) the LCD only with the stylus that comes with the BHT.
Using the tip of a pen or any pointed object will result in a damaged
or broken LCD.
电子信息产品中有毒有害物质或元素的名称及含量
有毒有害物质或元素
部件名称 铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr(VI))
多溴
联苯
(PBB)
多溴二
苯醚
(PBDE)
实装电路板 × ○ ○ ○ ○ ○
镜头 × ○ ○ ○ ○ ○
LCD面板 × ○ ○ ○ ○ ○
内部线路 × ○ ○ ○ ○ ○
○：表示该有毒有害物质在该部件所有均质材料中的含量均在SJ/T 11363-2006 标准
规定的限量要求以下。
×：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出SJ/T 11363-2006
标准规定的限量要求。
使用欧盟RoHS指令的免除条款中指定的有毒有害物质。
该标志适用于在中华人民共和国境内销售的电子信息产品，标志中央的数字表示
环保使用期限的年数。
Declaration of Conformity (For European Union)
Hereby, DENSO WAVE INCORPORATED, declares that this BHT-700BB-CE ，
BHT-700BWB-CE ，BHT-700BWBG-CE is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC. (BHT700BB-CE
and BHT700BWBG-CE can't be used in North America)
CE marking:
LABELING:
For European Union
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Otros manuales de Lector de código de barras de Denso
Denso
Denso BHT-825QW Manual de usuario
Denso
Denso BHT-1700BWB Instrucciones de uso
Denso
Denso BHT-1600 Manual de usuario
Denso
Denso BHT-100B Manual de usuario
Denso
Denso BHT-1505B Manual de usuario
Denso
Denso BHT-4000 Manual de usuario
Denso
Denso BTH-300BW Manual de usuario
Denso
Denso BHT-904BB Manual de usuario
Denso
Denso BHT-805B Manual de usuario
Denso
Denso GT10B-SU Manual de usuario
Denso
Denso QS20P-A Manual de usuario
Denso
Denso GT10B-SM Manual de usuario
Denso
Denso GT10B-SB Manual de usuario
Denso
Denso AT27Q-SB Manual de usuario
Denso
Denso AT30Q-SM Manual de usuario
Denso
Denso GT20Q-SB Manual de usuario
Denso
Denso BHT-7000 Manual de usuario
Denso
Denso BHT-302B Manual de usuario
Denso
Denso BHT-1400QWB-CE Manual de usuario
Denso
Denso BHT-8000 Manual de usuario
