Denso BHT-7500S Manual de usuario

User's Manual

any means without permission in writing from the publisher.

Specifications are subject to change without prior notice.

All products and company names mentioned in this manual are trademarks or regis-

tered trademarks of their respective holders.

Preface

Please READ through these operating instructions carefully. It will enable you to

operate your BHT-7500/7500S/7500W correctly.

After you have finished reading the instructions, keep this manual handy for speedy

reference.

How this book is organized

This manual is made up of five chapters and appendices.

Chapter 1. Quick Guide

Describes the basic operating method of the BHT and the related notes.

Chapter 2. Getting Started the BHT and System Mode

Summarizes the BHT system configuration and describes the operation including

preparation and System Mode (which is required for the efficient use of application

programs).

Chapter 3. Communications Operations of BHT

Describes the communications operations of the BHT—the spread-spectrum commu-

nication (for BHT-7500S/7500W only), IR communication, RS-232C interface specifica-

tions, basic communications specifications, and the communications protocols—for

data transfer with the host computer or other devices.

Chapter 4. Error Messages

Lists the error messages which will appear on the LCD if some error occurs in the BHT.

Chapter 5. Handling the CU-7000 (Option)

Describes the handling procedure of the CU-7000, the interfacing with the host com-

puter, and the charging of the rechargeable battery cartridge.

Appendix A: Specifications

Appendix B: Communications Protocol Details

Appendix C: A Typical Basic Operation

iii

■Technical Terms Used in This Manual

Source Program and Object Program (User Program)

Generally, a source program is translated into an object program by a compiler. This

manual calls an object program a user program.

BHT-BASIC

This manual expresses BHT-BASIC3.0 and BHT-BASIC3.5 as BHT-BASIC.

BHT/BHT-7500/BHT-7500S/BHT-7500W

This manual expresses the BHT-7500/BHT-7500S/BHT-7500W as "BHT." If it is neces-

sary to make a clear distinction between the BHT models, this manual uses the "BHT-

7500S/7500W only" or "BHT-7500S only."

■Related Publications

BHT-BASIC Programmer's Manual

Transfer Utility Guide

Ir-Transfer Utility C Guide

Ir-Transfer Utility E Guide

■Screen Indication

The lettering in the screens in this manual is a little different from that in the actual

screens. File names used are only for description purpose, so they will not appear if

you have not set files having those names.

SAFETY PRECAUTIONS

Be sure to observe all these safety precautions.

■Please READ through this manual carefully. It will enable you to use the BHT and

CU correctly.

■Always keep this manual nearby for speedy reference.

WARNING Alerts you to those conditions which could cause seri-

ous bodily injury or death if the instructions are not

followed correctly.

CAUTION Alerts you to those conditions which could cause minor

bodily injury or substantial property damage if the in-

structions are not followed correctly.

Meaning of Symbols

A triangle ( ) with a picture inside alerts you to a warning of danger. Here

you see the warning for electrical shock.

A diagonal line through a circle ( ) alerts you to something you should not

do; it may or may not have a picture inside. Here you see a screwdriver

inside the circle, meaning that you should not disassemble.

A black circle ( ) with a picture inside alerts you to something you MUST

do. This example shows that you MUST unplug the power cord.

Strict observance of these warning and caution indications are a MUST for preventing

accidents which could result in bodily injury and substantial property damage. Make

sure you fully understand all definitions of these terms and related symbols given

below, before you proceed to the text itself.

WARNING

Handling the battery cartridge

•Never disassemble or heat the battery

cartridge, nor put it into fire or water;

doing so could cause battery-rupture or

leakage of battery fluid, resulting in a

fire or bodily injury.

•Do not carry or store the battery car-

tridge together with metallic ball-point

pens, necklaces, coins, hairpins, etc.

Doing so could short-circuit the termi-

nal pins, causing the batteries to rup-

ture or the battery fluid to leak, result-

ing in a fire or bodily injury.

•Avoid dropping the battery cartridge or letting it undergo any shock

or impact.

Doing so could cause the batteries to break, generate heat, rupture or

burn.

•Never charge the rechargeable battery cartridge where any inflam-

mable gases may be emitted; doing so could cause fire.

Handling the BHT

•The BHT uses a laser light for scanning bar codes. The intensity of

the laser light might be too low to inflict bodily injury. However, do

not look into the laser beam.

The BHT complies with Laser Safety Standard, Class II of 21 CFR

Chapter 1, Subchapter J.

The BHT does not mount beam attenuator and laser radiation emis-

sion indicator required by this standard. Instead, the software-con-

trolled Magic keys (see Section 2.2 "Components and Functions")

function as them because the laser light is not enabled without the

Magic keys pressed.

Never

put me

into fire!

Do not

short-

circuit me!

Undedicated

•Only use the dedicated charger (CU-

7001, C-700 or C-750) for charging the

rechargeable battery cartridge.

Using a different type of charger could

cause battery-rupture or leakage of bat-

tery fluid and result in a fire, bodily in-

jury, or serious damage to property.

Charge only

with the

dedicated

device.

WARNING

•Do not look into the laser beam source through the reading window

or point the reading window towards the eyes.

The laser beam emitted through the reading window is harmful to the

eyes.

•Use of controls or adjustments or performance of procedures other

than those specified herein may result in hazardous radiation expo-

sure.

Handling the CU

•If smoke, abnormal odors or noises come from the CU, immediately

unplug the AC adapter from the wall socket and contact your nearest

dealer.

Failure to do so could cause fire or electrical shock.

•If foreign material or water gets into the CU, immediately unplug the

AC adapter from the wall socket and contact your nearest dealer.

Failure to do so could cause fire or electrical shock.

•If you drop the CU so as to damage its housing, immediately unplug

the AC adapter from the wall socket and contact your nearest dealer.

Failure to do so could cause fire or electrical shock.

•Never use the CU for charging anything other than the specified

rechargeable battery cartridges.

Doing so could cause heat, battery-rupture, or fire.

•Never bring any metals into contact with the output terminals.

Doing so could produce a large current through the CU, resulting in

heat or fire, as well as damage to the CU.

•Use the dedicated AC adapter only. Failure to do so could result in

fire.

•Never use the CU on the line voltage other than the specified level.

Doing so could cause the CU to break or burn.

•If the power cord of the AC adapter is damaged (e.g., exposed or

broken lead wires), stop using it and contact your nearest dealer.

Failure to do so could result in a fire or electrical shock.

vii

CAUTION

Basic handling tips

•Never put the BHT in places where there

are excessively high temperatures, such

as inside closed-up automobiles, or in

places exposed to direct sunlight.

Doing so could affect the housing or

parts, resulting in a fire.

•Avoid using the BHT in extremely hu-

mid or dusty areas, or where there are

drastic temperature changes.

Moisture or dust will get into the BHT,

resulting in malfunction, fire or electri-

cal shock.

•Never disassemble or modify the BHT; doing so could result in an

accident such as break or fire.

Handling the rechargeable battery cartridge

•Never charge a wet or damp rechargeable battery cartridge.

Doing so could cause the batteries to break, generate heat, rupture,

or burn.

Handling the BHT

•If smoke, abnormal odors or noises come from the BHT, immediately

turn off the power, pull out the battery cartridge, and contact your

nearest dealer.

Failure to do so could cause smoke or fire.

•If foreign material or water gets into the

BHT, immediately turn off the power,

pull out the battery cartridge, and con-

tact your nearest dealer.

Failure to do so could cause smoke or

fire.

Keep me

away from

water!

viii

CAUTION

•If you drop the BHT so as to damage its hous-

ing, immediately turn off the power, pull out

the rechargeable battery cartridge or dry bat-

tery cartridge, and contact your nearest dealer.

Failure to do so could cause smoke or fire.

•For those machines using the dry battery cartridge, do not mistake

the plus and minus marks when loading dry cells into the cartridge.

Failure to do so could cause battery-rupture or leakage of battery

fluid, resulting in bodily injury, fire, or property damage.

•For those machines using the dry battery cartridge, do not use any-

thing other than the specified type of batteries, nor use new and old

batteries together.

Doing so could cause battery-rupture or leakage of battery fluid,

resulting in bodily injury, fire, or property damage.

•Do not use batteries or power sources other than the specified ones;

doing so could generate heat or cause malfunction.

•In environments where static electricity can build into significant

charges (e.g., if you wipe off the resin plate with a dry cloth), do not

operate the BHT. Doing so will result in malfunction or machine

failure.

Do not

drop

me!

Handling the CU

•If you will not be using the CU for a long time, be sure to unplug the

AC adapter from the wall socket for safety.

Failure to do so could result in a fire.

•When caring for the CU, unplug the AC adapter from the wall socket

for safety.

Failure to do so could result in an electrical shock.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Lector de código de barras de Denso

Denso

Denso BHT-4000 Manual de usuario

Denso

Denso BHT-904BB Manual de usuario

Denso

Denso BHT-805BWB Manual de usuario

Denso

Denso BHT-7000 Manual de usuario

Denso

Denso GT10B-SU Manual de usuario

Denso

Denso BHT-1400QWB-CE Manual de usuario

Denso

Denso GT10B-SB Manual de usuario

Denso

Denso AT30Q-SM Manual de usuario

Denso

Denso BHT-825QW Manual de usuario

Denso

Denso Power Net Terminal BHT-103 Manual de usuario

Denso

Denso BHT-700BB-CE Manual

Denso

Denso BHT-100B Manual de usuario

Denso

Denso BHT-300BWB Manual

Denso

Denso BHT-8000 Manual de usuario

Denso

Denso BHT-7000 Manual de usuario

Denso

Denso GT10Q-SR Manual de usuario

Denso

Denso BHT-604BW Manual de usuario

Denso

Denso GT20Q-SB Manual de usuario

Denso

Denso BTH-300BW Manual de usuario

Denso

Denso BHT-202Q-CE Manual

Denso

Denso SE1-BB Manual de usuario

Denso

Denso GT10Q-SR Manual de usuario

Denso

Denso BHT-700-WM Manual de usuario

Denso

Denso 400BW-CE Manual de usuario

Manuales populares de Lector de código de barras de otras marcas

POSMicro

POSMicro Datalogic PowerScan D7100 Manual de usuario

Marson

Marson MT780 Guía de configuración rápida

NCR

NCR RealPOS Manual de usuario

Motorola

Motorola SE3300 Guía de configuración rápida

Element

Element P130BT Manual de usuario

Motorola

Motorola Symbol LS3008 Manual de instalación y operación

Meec tools

Meec tools OBD-II / VAG Manual de usuario

SICK

SICK CLP 100 Manual de usuario

Royal Tag SA

Royal Tag SA I-Read Manual de usuario

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manual de usuario

Meteor

Meteor 8310 Manual de usuario

Datalogic

Datalogic Heron HD3130 Manual de usuario

Motorola

Motorola MP6000 Instrucciones de montaje

Newland

Newland NLS-HR15-BT Manual de usuario

ARTDEV

ARTDEV AS-1310 Manual de usuario

Aopos

Aopos AS290 Manual de usuario

ENS

ENS 367-5455 Manual de usuario

Atid

Atid AT188N Plus Manual de usuario