Delta DPM-C530A Manual de usuario
www.deltaww.com
Multi-functional
Power Meter
DPM-C530A User Manual
1
Table of Contents
1. Preface‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧ 2
2. Notes ‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧ 3
2.1 Safety Notes‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧3
2.2 Installation Environment ‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧4
3. Descriptions of Parts‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧ 5
3.1 Operating Interface ‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧5
3.2 Product Name Tag‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧5
3.3 Exterior and Dimensions‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧5
4. Installation‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧7
4.1 Installation Method ‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧7
4.2 Basic Checks ‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧9
5. Wiring Diagrams‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧10
5.1 Wiring on the Back ‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧10
5.2 Descriptions of Wiring ‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧11
6. Panel Display and Settings ‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧ 13
6.1 Panel Display ‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧13
6.2 General Operations ‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧15
6.3 Setup Operations‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧16
7. Parameters and Functions ‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧ 22
7.1 Overview of Parameters ‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧22
8. Messages of Abnormal Operations ‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧ 72
9. Specifications‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧ 74
9.1 Specications ‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧74
9.2 Communication Specications‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧76
9.3 Modbus Communication‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧77
Appendix ‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧ 82
Appendix 1: Selecting Accessories ‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧‧82
2
Preface
Thank you for choosing this product. This manual offers information related to installation of the
DPM-C530A power meter. Before using the meter, please read this manual carefully to ensure
proper use of this meter. Also, please place the manual at an easy-to-find location for reference at
any time. Before you finish reading this manual, please observe the following notes:：
■No water vapor, corrosive and flammable gas shall be present in the installation environment.
■Follow the instructions on the diagram for wiring the device.
■Grounding must be performed correctly and properly according to provisions from related
regulations on electric work currently effective in the country.
■Do not disassemble the meter or alter its wiring with power connected.
■With power on, do not touch the power-connecting area to avoid electric shock.
If you still experience issues in the use, please contact your distributor or our customer service center.
As the product gets updated and improved, modifications on the specifications will be addressed in
the newest version of manual obtainable by contacting your distributor or downloading from the Delta
Electronics website（http://www.delta.com.tw/ia/）.
DANGER
DANGER
STOP
STOP
3
2.1 Safety Notes
Always be aware of the following safety notes when installing, wiring, operating, maintaining, and
checking the device.
◆Notes on Installation
» Install the power meter according to instructions on the manual. Otherwise, damage on the device might
result.
» It is forbidden to expose and use this product in a place present with matters, such as water vapor,
corrosive and flammable gas. Otherwise, electric shock, re, or explosion might result.
» Do not install the meter in an environment with a temperature that exceeds range on the specication.
Otherwise, inability of the meter to operate normally or damage on the meter might result.
» Do not use the meter on an alarm console that might cause personnel injury or death, damage on the
device, or system shutdown.
◆Note on Wiring
» Keep a good grounding on the grounded terminals, as improper grounding might cause
abnormal communication, electric shock, or re.
◆Notes on Operation
» Do not alter wiring with power turned on. Otherwise, electric shock or personnel injury might result.
» Do not touch the panel with a sharp item. Otherwise, indentation on the panel might result, which
causes the meter to not function normally.
◆Maintenance and Check
» Do not get to inside of the meter. Otherwise, electric shock might result.
» Do not take the meter panel apart when the power is on. Otherwise, electric shock might result.
»Do not touch the wiring terminals within 10 minutes after turning off power, as the remaining voltage
might cause electric shock.
»Do not block ventilation ducts when operating the meter. Otherwise, the meter will breakdown
because of inadequate heat dissipation.
◆Methods of Wiring
» Do not use voltage that exceeds range specied for the meter. Otherwise, electric shock or re might result.
»When wiring, take apart the quick connector from the main meter body.
»Connect only one cord on one plug on the quick connector.
»For wrongfully forced unplug, recheck the connecting cord and restart.
◆Wiring for Communication Circuits
» Follow the standard specication on use of wires for communication wiring.
» Length of communication wires should be within the specied standard.
»Use correct grounding loop to avoid communication issues.
»To avoid stronger noise interference that causes the meter to not operate normally, use an independent
wiring slot to separate the communication cable for the meter from all power cords and motor power cords.
Notes
4
2.2 Installation Environment
Before installation, this product must be placed in its packaging box. If not used for a while, be
sure to watch for the following when storing the meter, so that the product could be kept under
the company's warranty coverage for future maintenance.
■Place the device in a dry location free of dust.
■Ambient temperature for the storage location must be within the range of -20°C to +70°C (-4°F
to 158°F).
■Relative humidity for the storage location must be within the range of 5% to 95%, with no
condensation.
■Avoid storing at an environment present with corrosive gas and liquid.
■Package properly and store on a rack or counter.
■Suitable installation environment for this product includes: place with no device that generates
high amount of heat; place with no water drop, vapor, dust, and oily dust; place with no corrosive
and flammable gas; place with no floating dust and metal particles; place with no shaking and
interference from electromagnetic noise.
5
3.1 Operating Interface
DPM-C530A uses a LCD display that exhibits four pieces of measurement information on each
page. Diagram below is an illustration of the interface.
3.2 Product Name Tag
3.3 Exterior and Dimensions
Descriptions of Parts
A. Title
B. Area of display
C. Pulse light
D. Fault light
E. Menu key
F. Up key
G. Down key
H. Enter key
Descriptions:
MODEL : XXXXXXXXX
REV. : XX.XX
Input : 80~265VAC, 50/60Hz
100~300VDC
MAX 4.6W
XXXXXXXXXXXXXXXX
MADE IN XXXXXX
Model
Version
Certification
Serial Number
Country
SPEC LABEL
94.1
90
72.0 22.1
96
90
96
6
◆Front
◆Back
FUNCTION PIN VOLTAGE CURRENT
MEASURED VOTAGE
V1
20V L-N ~ 400V L-N
35V L-L ~ 690V L-L -
V2
V3
Vn
CONTROL POWER
L1/+
80 ~ 265 VAC
100 ~ 300 VDC 400mA MAX.
L2/-
MEASURED CURRENT
I1+
- 1A ~ 5A
I1-
I2+
I2-
I3+
I3-
RS-485
D+
-7 ~ +12 VDC -
D-
PULSE MENU UP DOWN ENTER
FAULT
198*160 DOTS LCD DISPLAY
I3-
V1 V2 V3 Vn L1/+ L2/-
D+ D-
I1+ I1- I2+ I2- I3+
INPUT / OUTPUT CONNECTOR PIN ASSIGNMENT
7
4.1 Installation Method
Note：
■The installation method should be based on instructions. Otherwise, breakdown would result.
■For better effectiveness of cooling cycles, sufcient space must be kept between adjacent
objects and walls during the installation. Otherwise, imperfect cooling would result.
■Maximal thickness for the panel installed should not exceed 5 mm.
Illustration of Installation：
Step 1:
Open the square hole on the metal plate and then
install the power meter.
Step 2:
Install the fixing mount into the sliding slot and
then push the meter in to touch the metal plate.
Step 3:
During the installation, reserve a 50 mm-wide space behind the power meter for dissipating heat
50
單位：mm
Installation
8
Dimensions of Panel Hole：
9
4.2 Basic Checks
Items Checked Contents of Checks
General Check
■Regularly check for losing of the xing mount at the location where the power
meter and device are connected.
■Guard against entrance of foreign objects, such as oil, water, or metal powder at
the heat dissipating holes. Guard against entrance of drill cut powders into the
power meter.
■Should the power meter be installed at a place present with harmful gas or dust,
guard against entrance of those matters into the meter.
Pre-operation
Check
(not supplied with
control power)
■Insulate the connecting spot of the wiring terminals.
■Communications wiring should be done properly, or abnormal operations might
result.
■Check for presence of conducive and flammable objects, such as screws or metal
pieces, in the power meter.
■Should electronic devices used near the power meter experience electromagnetic
interference, tune with instruments to reduce electromagnetic interference.
■Check for correct voltage level for the power supplied to the power meter.
Pre-running Check
(supplied with
control power)
■Check whether power indicator light is lit.
■Check whether communication between every device is normal.
■If there is any abnormal response from the power meter, contact your distributor
or our customer service center.
Tabla de contenidos
Otros manuales de Instrumento de medición de Delta
Delta
Delta DPM-C501L Manual de usuario
Delta
Delta DPM-C520 Manual de usuario
Delta
Delta DPM-C510 Manual de usuario
Delta
Delta LD-100E-M22 Manual de usuario
Delta
Delta RetroSign GRX-1 Manual de usuario
Delta
Delta LTL-XL Manual de usuario
Delta
Delta WS-6975 Manual de usuario
Delta
Delta HD2114.0 Manual de usuario
Delta
Delta HD2105.2 Manual de usuario
Delta
Delta LTL2000S Manual de usuario
Delta
Delta DPM-D520I Manual de usuario
Delta
Delta TZU-22 Manual de usuario
Delta
Delta OR-AE-1306 Manual de usuario
Delta
Delta EMS 32-011 Manual de usuario
Delta
Delta DVP04TC-H2 Manual de usuario
Delta
Delta SS1-UM-1.05 Manual de usuario
Delta
Delta XVR5432L-I2 Manual de usuario
Delta
Delta DPM-D510 Manual de usuario
Delta
Delta REVEZ-HD-TRIO DVB-T/T2 Manual de usuario
Delta
Delta DPM-C320 Manual de usuario
Manuales populares de Instrumento de medición de otras marcas
Endress+Hauser
Endress+Hauser Proline Promag 50 Especificaciones técnicas
Siemens
Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas
KLINGER
KLINGER CMF V Series Manual de usuario
EXFO
EXFO FTB-2 Manual de operación y mantenimiento
Keysight
Keysight M8290A Manual de usuario
ADTEK
ADTEK MW-5 Manual de usuario