Delta LD-100E-M22 Manual de usuario

Laser Displacement Operating Manual

LD-E Laser Displacement Operating

Manual V1.0

Table of Contents

Chapter 1: Product Profile................................................... 1-1

1.1 Packaging........................................................................................ 1-1

1.2 Part Names and Functions .............................................................. 1-1

1.3 Installation ....................................................................................... 1-2

Chapter 2: Settings and Measurements ......................... 2-1

2.1 Display Operation ............................................................................ 2-1

Chapter 3: Software Operation .......................................... 3-1

3.1 Communication Setting ................................................................... 3-1

Chapter 4: Communication Setting .................................. 4-1

4.1 Communication Address.................................................................. 4-1

4.2 Communication Protocol ................................................................. 4-4

Chapter 5: Specifications .................................................... 5-1

Chapter 6: Safety Precautions........................................... 6-1

Chapter 7: Warranty .............................................................. 7-1

Chapter 1 Product Profile

LD-E Operation Manual

1-1

Chapter 1

Product Profile

1.1 Packaging

The following is included:

1) Laser displacement and cable (optional)

2) Laser label

3) Simple instruction sheet

Laser Label Description

1.2 Part Names and Functions

◎Exterior

Positive Side

Laser light emitting

area

Laser light receiving

area

Panel setting

and display

Ø3

mounting

holes

9 Pin outlet

Laser Radiations: Class 2 Product

Maximum Output: <1mW

Pulse Duration: 0.5ms max.

Wave Length:655nm, IEC 60825-1:2014

Chapter 1 Product Profile

LD-E Operation Manual

1-2

◎Laser Indicator

Indicator Color Description

Laser indicator Blue light Start (laser on)

OUT Green light DO

IN Yellow light DI

Negative Red light Negative

1.3 Installation

◎Dimension (unit: mm)

Laser indicator

Negative

Chapter 1 Product Profile

LD-E Operation Manual

1-3

◎Wiring Instructions

Chapter 1 Product Profile

LD-E Operation Manual

1-4

◎Caution on Mounting Direction

For best product performance, please note the following instructions when installing products.

1) When products cling to devices, install the products in parallel with the devices to assure product

performance.

2) When the shape of an inspection object is extrusive, ensure the product's lighting route is vertical to

the inspection object's path to assure product performance.

Chapter 2 Settings and Measurements

LD-E Operation Manual

2-1

Chapter 2

Settings and Measurements

2.1 Display operation

◎Display instruction

Chapter 2 Settings and Measurements

LD-E Operation Manual

2-2

Basic teaching (2 point teaching)

The teaching point of second point is greater than the first point 2 hysteresis (Hys) size.

1. 2.

1. In a state of background, press .

2. When there is a detection object, press

When the object can be detected

When the object cannot be detected

Chapter 2 Settings and Measurements

LD-E Operation Manual

2-3

Single point teaching (window comparison mode)

Single point teaching is used for the distance between the reference plane of the detection object, the

method of setting the upper and lower limits, and the output between the upper and lower limits.

After the reference plane of the detection object is taught

1_SL = The height of the detection object minus 2 times the hysteresis

2_SL = The height of the detection object plus 2 times the hysteresis

1. With the detection object, press twice. (1st time: TEACH mode, 2nd time: teaching)

2. After teaching, press once to leave.

Chapter 2 Settings and Measurements

LD-E Operation Manual

2-4

2 point teaching (window comparison mode)

Execute 2 point teaching and set the reference value.

First, come to the advanced setting, set the detection output to _P_2 (2-point teaching)

When executing, use detection objects with different distances (P-1, P-2)

1. When there is a detection object (P-1), press the first to enter the teaching mode, and press the second

2. With the detection object (P-2), press the third

When the object can be detected, press the fourth to leave.

When the object cannot be detected, press the fourth to leave.

Chapter 2 Settings and Measurements

LD-E Operation Manual

2-5

3 point teaching (window comparison mode)

Before executing 3 point teaching, set the reference value 1_SL between 1st time and 2nd time

and set the reference value 2_SL between 2nd time and 3rd time.

First, come to the advanced setting, set the detection output to _P_3 (3-point teaching)

1. When there is a detection object (P-1), press the first to enter the teaching mode, and press the second

2. With the detection object (P-2), press the third

3. With the detection object (P-2), press the fourth

When the object can be detected, press the fifth to leave.

When the object cannot be detected, press the fifth to leave.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Instrumento de medición de Delta

Delta

Delta LTL-XL Manual de usuario

Delta

Delta RetroSign GR1 Manual de usuario

Delta

Delta LTL2000S Manual de usuario

Delta

Delta RetroSign GRX Manual de usuario

Delta

Delta HD2114P.0 Manual de usuario

Delta

Delta DPM-C501L Manual de usuario

Delta

Delta OR-AE-1306 Manual de usuario

Delta

Delta WS-6975 Manual de usuario

Delta

Delta DPM-D520I Manual de usuario

Delta

Delta dvp04pt-s Manual de usuario

Delta

Delta SS1-UM-1.05 Manual de usuario

Delta

Delta DVP08NTC-S Manual de usuario

Delta

Delta R4E Manual de usuario

Delta

Delta UNOnext Manual de usuario

Delta

Delta DVP-ES2 Manual de usuario

Delta

Delta ZS1000-A-V2 Manual de usuario

Delta

Delta DPM-C520 Manual de usuario

Delta

Delta DPM-C501L Manual de usuario

Delta

Delta TZU-22 Manual de usuario

Delta

Delta LTL-XL Manual de usuario

Delta

Delta LTL-X Mark II Manual de usuario

Delta

Delta UNO-C07X011 Manual de usuario

Delta

Delta DPM-C320 Manual de usuario

Delta

Delta PPM R4E Manual de usuario

Manuales populares de Instrumento de medición de otras marcas

Suaoki

Suaoki D40 Manual de usuario

Elster

Elster BK-G1.6 Manual de usuario

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manual

Duratool

Duratool D03128 Manual de usuario

Vega

Vega VEGAPULS 65 Manual de usuario

Tonghui

Tonghui TH2618B Manual de usuario

Tenmars

Tenmars TM-801 Manual de usuario

MSR

MSR 145 Manual de usuario

TPS

TPS WP-82 Manual de usuario

ELMETRON

ELMETRON CP-511 Manual de usuario

PCB Piezotronics

PCB Piezotronics 003C30 Manual de usuario

Tenma

Tenma 72-10465 Manual de usuario

Endress+Hauser

Endress+Hauser Proline Promag 50 Especificaciones técnicas

Siemens

Siemens SITRANS F Coriolis FCT030 Manual de lista de piezas

KLINGER

KLINGER CMF V Series Manual de usuario

EXFO

EXFO FTB-2 Manual de operación y mantenimiento

Keysight

Keysight M8290A Manual de usuario

ADTEK

ADTEK MW-5 Manual de usuario