8-15-2018 K68622704
3
www.mopar.com
▼ HEY! TORQUE BOY: READ BEFORE YOU INSTALL DECKED ▼
1. DON’T be an idiotreadtheinstructions.
2. DON'T overtightenbolts,getem' hand-tight.
3. DON'Tuse powertools.
4. Ifyoudon'tfollowdirectionsand
do
usepowertools:
1). Setclutchat a verylowsetting. 2). Ifyoublowit,seeNOTE.*
NOTE*Twoextra threadedinsertsareincludedinBAG PREP-EXTRA. That’sall youget.Theinsertswill replaceany
strippedinsertsinthetailgateammocans,butNOTTHE CENTER VERT, so hand tightenuntilsnugonly!You can
alsoscrewtheinsertsback in if dislocated.Thereis a straightscrewdriverslotontheundersideoftheinsert.
5. DON'T overtightenJ-hooksduringinstallation.
Make'emgood and snugenough tokeepthe
systemfrommovinginthe bed.
6. Nicejob if you’restillreading.
TAILGATE ammo cans havewidebottoms;CABSIDEammocanshavenarrowbottoms.
NOTE:You willneed abuddy tohelp withexactlytwosteps,notincluding drainingthesixpackor snapping
picsofyouposing.
Prevent abusive, expletive-filled language, watch our detailed installation video
or give us a call. We’re happy to help!
208.806.0251 | DECKED.COM/INSTALLVIDEO
AMMO CAN DRAIN HOLES
(TODRILL ORNOTTODRILL.)
• Do you use a tonneau or shell over your DECKED system?
There is no need to drill holes.
• Does your DECKED system live outside?
The ammo cans will get water in them. You’ll need to drill holes in the ammo cans.
There are two dimples in the bottom of each ammo can. Drill a 1/2” hole at each dimple. A smaller hole
will get clogged.
