D-Link DWR-953 Manual de usuario
Quick Installation Guide
DWR-953
Wireless AC1200 4G LTE Router
with Gigabit Ether et Ports
DWR-953 Quick Installation Guide
BEFORE YOU BEGIN
Delivery Package
•Router DWR-953
•Power adapter DC 12V/1.5A
•Ethernet cable
•wo detachable L E/3G antennas
•“Quick Installation Guide” (brochure).
If any of the items are missing, please contact your reseller.
he “User Manual” and “Quick Installation Guide” documents are available
on D-Link website (see www.dlink.ru).
!Using a power supply with a different voltage rating than the one
included will cause damage and void the warranty for this product.
2
DWR-953 Quick Installation Guide
Default Settings
Do ain na e of device dlinkrouter.local.
IP address of device 192.168.0.1
Userna e (login) admin
Password admin
Na e of wireless
network (SSID)
2.4GHz DWR-953
5GHz DWR-953-5G
Network key (PSK password)
see WPS PIN on the barcode
label on the bottom panel of
the device
!
Router DWR-953 with default settings cannot connect to the Internet.
o get started, please set your own password for access to the web-
based interface and change the WLAN name (SSID); then, if needed,
configure other settings recommended by your ISP.
3
DWR-953 Quick Installation Guide
System Requirements and Equipment
•A computer with any operating system that supports a web browser.
•A web browser to access the web-based interface of the router:
◦Apple Safari 8 and later
◦Google Chrome 48 and later
◦Microsoft Internet Explorer 10 and later
◦Microsoft Edge 20.10240 and later
◦Mozilla Firefox 44 and later
◦Opera 35 and later.
•A NIC (Ethernet or Wi-Fi adapter) to connect to the router.
•An 802.11a, b, g, n, or ac Wi-Fi adapter to create a wireless network.
•An active SIM card (when it is necessary to connect to the Internet via
mobile operators' networks)1.
1 Contact your operator to get information on the service coverage and fees.
4
DWR-953 Quick Installation Guide
CONNECTING TO PC
PC with Ethernet Adapter
1. Connect an Ethernet cable between any of LAN ports located on the back
panel of the router and the Ethernet port of your PC.
2. To connect via built-in LTE modem: insert a SIM card into the slot on
the right side panel of the router with the gold contacts facing towards the
front of the device and gently push until it clicks.
!If you need to connect a SIM card or change it to another one when the
router is powered on, power off the router, insert or change the SIM
card, and power on the router.
3. Connect the power cord to the power connector port on the back panel of
the router, then plug the power adapter into an electrical outlet or power
strip.
4. urn on the router by pressing the ON/OFF button on its right side panel.
hen make sure that your PC is configured to obtain an IP address
automatically (as DHCP client).
5
DWR-953 Quick Installation Guide
Obtaining P Address Automatically
(OS Windows 7)
1. Click the Start button and proceed to the Control Panel window.
2. Select the Network and Sharing Center section. (If the Control Panel
has the category view (the Category value is selected from the View by
drop-down list in the top right corner of the window), choose the View
network status and tasks line under the Network and Internet
section.)
3. In the menu located on the left part of the window, select the Change
adapter settings line.
4. In the opened window, right-click the relevant Local Area Connection
icon and select the Properties line in the menu displayed.
5. In the Local Area Connection Properties window, on the
Networking tab, select the Internet Protocol Version 4 (TCP/IPv4)
line. Click the Properties button.
6
DWR-953 Quick Installation Guide
6. Make sure that the Obtain an IP address auto atically and Obtain
DNS server address auto atically choices of the radio buttons are
selected. Click the OK button.
7. Click the OK button in the connection properties window.
7
DWR-953 Quick Installation Guide
PC with Wi-Fi Adapter
1. To connect via built-in LTE modem: insert a SIM card into the slot on
the right side panel of the router with the gold contacts facing towards the
front of the device and gently push until it clicks.
!If you need to connect a SIM card or change it to another one when the
router is powered on, power off the router, insert or change the SIM
card, and power on the router.
2. Connect the power cord to the power connector port on the back panel of
the router, then plug the power adapter into an electrical outlet or power
strip.
3. urn on the router by pressing the ON/OFF button on its right side panel.
4. urn on your Wi-Fi adapter. As a rule, modern notebooks with built-in
wireless NICs are equipped with a button or switch that turns on/off the
wireless adapter (refer to your PC documents). If your PC is equipped
with a pluggable wireless NIC, install the software provided with your
Wi-Fi adapter.
hen make sure that your Wi-Fi adapter is configured to obtain an IP address
automatically (as DHCP client).
8
DWR-953 Quick Installation Guide
Obtaining P Address Automatically and
Connecting to Wireless Network (OS Windows 7)
1. Click the Start button and proceed to the Control Panel window.
2. Select the Network and Sharing Center section. (If the Control Panel
has the category view (the Category value is selected from the View by
drop-down list in the top right corner of the window), choose the View
network status and tasks line under the Network and Internet
section.)
3. In the menu located on the left part of the window, select the Change
adapter settings line.
4. In the opened window, right-click the relevant Wireless Network
Connection icon. Make sure that your Wi-Fi adapter is on, then select
the Properties line in the menu displayed.
5. In the Wireless Network Connection Properties window, on the
Networking tab, select the Internet Protocol Version 4 (TCP/IPv4)
line. Click the Properties button.
9
DWR-953 Quick Installation Guide
6. Make sure that the Obtain an IP address auto atically and Obtain
DNS server address auto atically choices of the radio buttons are
selected. Click the OK button.
7. Click the OK button in the connection properties window.
8. o open the list of available wireless networks, select the icon of the
wireless network connection and click the Connect To button or left-
click the network icon in the notification area located on the right side of
the taskbar.
10
Otros manuales para DWR-953
5
Tabla de contenidos
Otros manuales de Enrutador inalámbrico de D-Link
D-Link
D-Link DIR-636L Manual de usuario
D-Link
D-Link DVG-N5402SP Manual de usuario
D-Link
D-Link DAP-1250 Manual de usuario
D-Link
D-Link DIR-615 - Wireless N Router Manual de usuario
D-Link
D-Link COVR-C1213 Manual de usuario
D-Link
D-Link DWP-1010 Manual de usuario
D-Link
D-Link DGS-1210-28P Manual de usuario
D-Link
D-Link DIR-835 Manual de usuario
D-Link
D-Link DIR-890L Manual de usuario
D-Link
D-Link DIR-320NRU Manual de usuario
D-Link
D-Link DSL-2790U Manual de usuario
D-Link
D-Link DIR-300S Manual de usuario
D-Link
D-Link AirPro DI-764 Manual de usuario
D-Link
D-Link DWR-932 Manual de usuario
D-Link
D-Link DSL-2750E Manual
D-Link
D-Link DSP-W115 Manual de usuario
D-Link
D-Link AirPlus GDI-824VUP Manual de usuario
D-Link
D-Link DIR-835 Manual de usuario
D-Link
D-Link COVR-C1210 Manual de usuario
D-Link
D-Link DIR-601 Manual de usuario
