D-Link Air Premier DAP-2695 Manual de usuario

AC1750 DUAL BAND PoE ACCESS POINT

DAP-2695

Quick Install Guide+

Installations-Anleitung+

Guide d’installation+

Guía de instalación+

Guida di Installazione+

DAP-2695_A1_QIG_v1.00(EU).indd 1

2013/8/19 下午 02:20:45

D-Link DAP-2695 Quick Install Guide

ENGLISH

Minimum System Requirements:

• CD-ROM Drive

• Computers with Windows®, Macintosh®, or Linux-based operating systems

• Installed Ethernet adapter or wireless adapter

• Internet Explorer 7, Chrome, Firefox, or Safari 4 or higher

System Requirements

Package Contents

Note: Using a power supply with a different voltage than the one included with the DAP-2695 will cause damage and void the

warranty for this product. If any of the above items are missing, please contact your reseller.

DAP-2695 802.11ac

Access Point

Power Adapter

Ethernet Cable

PoE Base Unit

CD-ROM

Console Cable

Mounting Plate

Hardware Overview

LEDs

DAP-2695_A1_QIG_v1.00(EU).indd 2

2013/8/19 下午 02:20:53

D-Link DAP-2695 Quick Install Guide 3

ENGLISH

5 GHz - When lit, the access point is operating at 5GHz.

This light will blink when there is wireless trafc.

2.4 GHz - When lit, the access point is operating at 2.4GHz. This light will blink

when there is wireless trafc.

LAN1/LAN2 - Solid light when the Ethernet port is connected to a working port,

such as a router or switch. The light will blink when there is trafc through LAN

port.

POWER - The light will blink during boot up. Once solid, the access point is ready.

Installing the Hardware

LAN Port (PoE)

Reset Button

Power Receptor

Console Port

5GHz Antenna Connectors*

LAN Port

2.4GHz Antenna Connectors*

* 1 x 5GHz and 2 x 2.4GHz antenna connectors are located on the bottom of the access point.

DAP-2695_A1_QIG_v1.00(EU).indd 3

2013/8/19 下午 02:20:56

D-Link DAP-2695 Quick Install Guide

ENGLISH

To power the access point, you can use one of

the following 3 methods:

Method 1 - Use if you have a

PoE switch.

Method 2 - Use if you do not

have a PoE switch

and do not have a

power outlet near

the location of the

access point.

Method 3 - Use if you do not

have a PoE switch

and have a power

outlet near the

location of the

access point.

Method 1

1. Connect one end of your Ethernet cable

into the LAN1 (PoE) port on the DAP-

2695.

2. Connect the other end into one port on a

PoE switch.

Method 2

1. Connect one end of an Ethernet

cable into the Data In port on the

PoE base unit and the other end

into one port on your switch, router,

or computer.

2. Connect one end of an Ethernet

cable into the P+Data Out port on

the PoE base unit and the other

end into the LAN1 (PoE) port on

the DAP-2695 access point.

3. Use the supplied power adapter.

Connect the power adapter to the

Power In receptor on the PoE

adapter.

4. Connect the other end of power

adapter into a power outlet.

DAP-2695_A1_QIG_v1.00(EU).indd 4

2013/8/19 下午 02:20:57

D-Link DAP-2695 Quick Install Guide 5

ENGLISH

Method 3

1. Connect one end of your Ethernet

cable into the LAN1 (PoE) or LAN2 port

on the DAP-2695 and then connect

the other end to a switch, router, or

computer.

2. Use the supplied power adapter.

Connect the power adapter to the

Power receptor on the DAP-2695

access point.

3. Connect the other end of power adapter

into a power outlet.

Conguration

Note: It is recommended to congure your DAP-2695 before mounting. The

easiest way is to connect to the Access Point directly to a computer using an

Ethernet cable. Statically assign the IP address of your computer to 192.168.0.2

with a subnet mask of 255.255.255.0.

Step 1: Open a web browser (e.g., Internet Explorer, Chrome, Firefox , or Safari)

and enter http://192.168.0.50.

Step 2: At the login screen, enter admin for the user name and leave the password

blanks. Click Login to continue.

DAP-2695_A1_QIG_v1.00(EU).indd 5

2013/8/19 下午 02:20:57

D-Link DAP-2695 Quick Install Guide

ENGLISH

Step 3: After the home page appears, go to Basic Settings > LAN to change

the IP settings of the DAP-2695. Go to Basic Settings > Wireless to congure

your wireless settings.

Note: Make sure you click on Conguration > Save and Activate to save

your settings.

Step 1: Insert the provided wall anchors in the wall where the mounting plate

will be attached.

Mounting Plate Assembly

Step 2: Use the provided screws to secure the mounting plate on the wall.

DAP-2695_A1_QIG_v1.00(EU).indd 6

2013/8/19 下午 02:20:59

D-Link DAP-2695 Quick Install Guide 7

ENGLISH

Step 3: Attach the remaining screws securely to the back of the DAP-2695.

Step 4: Attach the DAP-2695 to the mounting plate.

Step 5: Slide the DAP-2695 down into the grooves on the mounting plate to

secure it to the plate.

DAP-2695_A1_QIG_v1.00(EU).indd 7

2013/8/19 下午 02:21:00

D-Link DAP-2695 Quick Install Guide

ENGLISH

When you have completed the steps in this Installation Guide and congured

your for your network, your network should look similar to this:

Your Setup is Complete

* Maximum Wireless signal rate derived from draft IEEE802.11ac specications. Actual data throughput will vary. Network

conditions and environmental factors, including volume of network trafc, building materials and construction, and network

overhead lower actual data throughput rate.

To setup and manage the DAP-2695 from a computer, use one of the following

methods:

1. Connect a straight through Ethernet cable between the access point and your

computer.

2. Connect the access point to a switch or router and use a computer from a

computer that is also connected to that switch or router.

TECHNICAL SUPPORT

United Kingdom (Mon-Fri) , Website: http://www.dlink.com

Home Wireless/Broadband 0871 873 3000 (9.00am–06.00pm, Sat 10.00am-02.00pm)

Managed, Smart, & Wireless Switches, or Firewalls 0871 873 0909 (09.00am- 05.30pm)

(BT 10ppm, other carriers may vary.)

Ireland (Mon-Fri), Website: http://www.dlink.com

All Products 1890 886 899 (09.00am-06.00pm, Sat 10.00am-02.00pm)

Phone rates: €0.05ppm peak, €0.045ppm off peak times

DAP-2695_A1_QIG_v1.00(EU).indd 8

2013/8/19 下午 02:21:03

D-Link DAP-2695 Quick Install Guide 9

Mindestsystemanforderungen:

• CD-ROM-Laufwerk

• Computer mit Windows®, Macintosh® oder Linux-basierten

Betriebssystemen

• Installierter Ethernet-Adapter oder Wireless Adapter

• Internet Explorer 7, Chrome, Firefox oder Safari 4 oder höher

Systemanforderungen

Packungsinhalt

Hinweis: Die Verwendung eines Netzteils mit einer anderen Spannung als jener des mit dem DAP-2695 mitgelieferten

Netzteils verursacht Schäden. In diesem Falle erlischt der Garantieanspruch für dieses Produkt. Sollte einer der oben

aufgeführten Artikel fehlen, wenden Sie sich bitte an Ihren Fachhändler.

DAP-2695 802.11ac

Access Point

Netzteil

(Stromadapter)

Ethernet-Kabel

PoE-

Basiseinheit

CD-ROM

Konsolenkabel

Montageplatte

Hardware-Überblick

LEDs

DAP-2695_A1_QIG_v1.00(EU).indd 9

2013/8/19 下午 02:21:11

D-Link DAP-2695 Quick Install Guide

5 GHz – Leuchtet, wenn der Access Point im 5-GHz-Bereich betrieben wird.

Dieses Licht blinkt bei drahtlosem Datenverkehr.

2,4 GHz – Leuchtet, wenn der Access Point im 2,4-GHz-Bereich betrieben

wird. Dieses Licht blinkt bei drahtlosem Datenverkehr.

LAN1/LAN2 - Leuchtet durchgehend, wenn der Ethernet-Port an einen

ordnungsgemäß funktionierenden Port, wie etwa einen Router oder Switch,

angeschlossen ist. Das Licht blinkt bei Datenverkehr über den LAN-Port.

POWER – Das Licht blinkt während des Hochfahrens. Sobald es

durchgehend leuchtet, ist der Access Point betriebsbereit.

Installation der Hardware

LAN-Port (PoE)

Rücksetztaste/-

knopf (Reset)

Stromeingangsbuchse

Konsolenport

5 GHz Antennenanschlüsse*

LAN-Port

2,4 GHz Antennenanschlüsse*

* 1 x 5 GHz und 2 x 2,4 GHz-Antennenanschlüsse benden sich auf der Unterseite des Access Point.

DAP-2695_A1_QIG_v1.00(EU).indd 10

2013/8/19 下午 02:21:14

Otros manuales para Air Premier DAP-2695

Tabla de contenidos

Idiomas:

Otros manuales de Punto de acceso inalámbrico de D-Link

D-Link

D-Link AirPremier N DAP-2690 Manual de usuario

D-Link

D-Link AC1200 Manual de usuario

D-Link

D-Link NUCLIAS CONNECT Manual de usuario

D-Link

D-Link DAP-1150 Manual de usuario

D-Link

D-Link DAP-3315 Manual de usuario

D-Link

D-Link AirPremier N DAP-2310 Manual de usuario

D-Link

D-Link DWL-3500AP Manual de servicio

D-Link

D-Link DWL-2700AP - AirPremier Outdoor Wireless Access... Manual de usuario

D-Link

D-Link DWL-6600AP Manual de usuario

D-Link

D-Link DAP-1533 Manual de usuario

D-Link

D-Link DWL-6600AP Manual de usuario

D-Link

D-Link DWL-7200AP - AirPremier AG - Wireless Access... Manual de usuario

D-Link

D-Link nuclias connect DAP-2662 Manual de usuario

D-Link

D-Link AirPlus DWL-900AP Manual de usuario

D-Link

D-Link DWL-6620APS Manual de usuario

D-Link

D-Link DAP-1665 Manual de usuario

D-Link

D-Link AirPro DWL-6000AP Manual de usuario

D-Link

D-Link AirPremier DWL-1700AP Manual de usuario

D-Link

D-Link xtreme n duo dap-1522 Manual de usuario

D-Link

D-Link DAP-1155 Manual de usuario

D-Link

D-Link DWL-2600AP Manual de servicio

D-Link

D-Link DWL-6600AP Manual de usuario

D-Link

D-Link AirPremier DWL-7700AP Manual de usuario

D-Link

D-Link DAP-2610 Manual de usuario

Manuales populares de Punto de acceso inalámbrico de otras marcas

Ubiquiti

Ubiquiti NanoStation NSM2 Manual de usuario

Cisco

Cisco Aironet 1550 Series Manual de usuario

Aruba

Aruba IAP-335 Manual de usuario

Advantek Networks

Advantek Networks AWN-AP-54MR Manual de usuario

IP-COM

IP-COM AP355 Manual de usuario

Buffalo

Buffalo AirStation WLA-L11G Manual de usuario

EnGenius

EnGenius EnStationACv2 Manual de usuario

xG Technology

xG Technology xMax CN1300 Manual de usuario

Widelink

Widelink ezWave WAP-1100 Series Manual de usuario

Edimax

Edimax CAP1200 Manual de usuario

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manual de usuario

Aruba

Aruba AP-203R Manual de usuario

LuXout Shades

LuXout Shades LUXSHADE MOTION Manual de usuario

CreatComm

CreatComm TB5F Manual de usuario

SineDigital

SineDigital MW-1500AP(H) Manual de usuario

TP-Link

TP-Link AP9650 V1 Manual de usuario

Draytek

Draytek VIGORAP 902 Manual de usuario

EnGenius

EnGenius EAP350 Manual de usuario