D-Link DSL-524B Manual de usuario

Quick Installation Guide

DSL-524B Generation II

ADSL2+ Router

Before You Begin

Check Your Package Contents

Make sure you have all the necessary information and equipment on hand

before beginning the installation.

DSL-524B ADSL Modem

CD-ROM (containing Manual)

Ethernet (CAT5 UTP) Cable

Telephone Cable

Power Adapter

If any of the above items are missing, please contact your reseller

Connecting the Modem to Your Computer

A. First, connect the power adapter to the receptor at the back panel of the

DSL-524B and then plug the other end of the power adapter to a wall outlet or

power strip. The Power LED will turn ON to indicate proper operation.

B. Insert one end of the cable into the Ethernet port on the back panel of the

DSL-524B and the other end of the cable to an Ethernet Adapter or available

Ethernet port on your computer.

ADSL Port

Use the ADSL cable to connect to the

your telephone line (RJ-11 port)

Ethernet Port

Use the Ethernet port to connect

the Router to a computer or an

Ethernet LAN

Power Insert

Use the adapter shipped with

the Router to connect to power

source

Power Button

Push in to power-on the Router.

Push again to power-off the Router

Reset Button

To manually reset, depress button with

the power on for at least seven seconds

Conguring the Modem

To use your Web browser to access the web pages used to setup the Modem, your computer must be

congured to “Obtain an IP address automatically”, that is, you must change the IP network settings of your

computer so that it is a DHCP Client. If you are using Windows XP and do not know how to change your

network settings, skip ahead to Appendix A and read the instructions provided. You may also read the User

Manual for instructions on changing IP settings for computers running Windows operating systems.

Open your Web browser and type

“http://192.168.1.1” into the URL address box.

Then press the Enter or Return key.

The Login page appears.

Type “admin” for the

in the Password eld. Click OK

Power Insert

Conguring the Modem (continued)

Click “WAN” on the left page, enter into “WAN Area Network (WAN) Setup” conguration page.

Click on the next connection which you want modify. Press “Add” button, enter the congure guide,

as following picture showed.

The value for VPI/VCI is assigned by your ISP. After inputting the PVC value, press “Next” to “Connection

Type”, as following picture showed.

Select “PPP over Ethernet (PPPoE)”, press “Next” entering the conguring interface, as following

picture showed.

Congure your PPP Username and Password from ISP. Then press “Next” to “Network Address

Translation Settings”, as following picture showed.

Press “Next” to enter into “WAN Setup - Summary”, click “Save” to save conguration, if you need

to modify the parameter, click “Back”, as following picture showed.

Conguring the Modem (continued)

To save the new settings, please access Management menu , click the Save/reboot button in the Save/

reboot menu. After a few seconds, the changes will be saved. The Modem will automatically establish the

Internet connection after a few more seconds.

Wait a few seconds for the Internet connection to be established and proceed to access the Internet via your web browser.

Click Save/reboot button to

save the new settings.

For additional settings or information, refer to the Advanced, Tools, or Status tabs on the web-

management interface; or to the manual located on the CD-ROM.

Use the following steps to congure a computer running Windows XP to be a DHCP client.

1. From the Start menu on your desktop, go to Settings, then click on Network Connections.

2. In the Network Connections window, right-click on LAN (Local Area Connection), then click Properties.

Conguring IP Settings in Windows XP

Appendix

3. In the General tab of the Local Area Connection Properties menu, highlight Internet Protocol (TCP/IP)

under “This connection uses the following items:” by clicking on it once. Click on the Properties button.

Right-click on the Local Area Connection

icon and Select the Properties option

from the pull-down menu.

Click Properties

Otros manuales para DSL-524B

Tabla de contenidos

Otros manuales de Enrutador de red de D-Link

D-Link

D-Link DI-LB604 - Load Balancing Router Manual de usuario

D-Link

D-Link DSL-500T Manual de usuario

D-Link

D-Link 2Voice + 4SW VoIP Router DVG-1402S Manual de usuario

D-Link

D-Link M15-2PK Manual de usuario

D-Link

D-Link DES-1016E Manual de usuario

D-Link

D-Link Xtreme N DUO Manual de usuario

D-Link

D-Link DSL-3788 Manual de usuario

D-Link

D-Link DSL-2878 Manual de usuario

D-Link

D-Link EBR-2310 Manual de usuario

D-Link

D-Link Express EtherNetwork DI-604 Manual de usuario

D-Link

D-Link DIR-615+ Manual de usuario

D-Link

D-Link DSL-G804V Manual de usuario

D-Link

D-Link DSL-2542B Manual de usuario

D-Link

D-Link Xtreme N DIR-685 Manual de usuario

D-Link

D-Link DSL-2750U Manual de usuario

D-Link

D-Link DIR-850L Instrucciones de funcionamiento y seguridad

D-Link

D-Link DIR-806A Manual de usuario

D-Link

D-Link DWR-500 Manual de usuario

D-Link

D-Link AirPlus XtremeG Ethernet-to-Wireless Bridge... Manual de usuario

D-Link

D-Link DWM-312W Manual de usuario

D-Link

D-Link DIR-820L Manual de usuario

D-Link

D-Link DSL-G2452GR-5G Manual de usuario

D-Link

D-Link DIR-619 Manual

D-Link

D-Link DSL-2680 Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad