D-Link DIR-825/GF Manual de usuario
Quick Installation Guide
DIR-825/GF
Wireless AC1200 MU-MIMO Dual Band Gigabi
Rou er wi h Fiber WAN Por , 3G/LTE Suppor
and USB Por
DIR-825/GF Quick Installation Guide
BEFORE YOU BEGIN
Delivery Package
•Router DIR-825/GF
•Power adapter DC 12V/1.5A
•Ethernet cab e
•“Quick Installation Guide” (brochure).
If any of the items are missing, p ease contact your rese er.
The “User Manual” and “Quick Installation Guide” documents are avai ab e
on D-Link website (see www.d ink.ru).
!Using a power supply with a different voltage rating than the one
included will cause damage and void the warranty for this product.
2
DIR-825/GF Quick Installation Guide
Default Settings
IP add ess of device 192.168.0.1
Use name (login) admin
Passwo d admin
Name of wi eless netwo k
(SSID)
2.4GHz DIR-825
5GHz DIR-825-5G
Netwo k key (PSK passwo d)
see WPS PIN on the barcode
abe on the bottom pane of
the device
!
Router DIR-825/GF with defau t settings cannot connect to the Internet.
To get started, p ease set your own password for access to the web-
based interface and change the WLAN name (SSID); then, if needed,
configure other settings recommended by your ISP.
3
DIR-825/GF Quick Installation Guide
System Requirements and Equipment
•An Android or iPhone mobi e device (smartphone or tab et) or a
computer with any operating system that supports a web browser.
•A PC web browser to access the web-based interface:
◦App e Safari 8 and ater
◦Goog e Chrome 48 and ater
◦Microsoft Internet Exp orer 10 and ater
◦Microsoft Edge 20.10240 and ater
◦Mozi a Firefox 44 and ater
◦Opera 35 and ater.
•A NIC (Ethernet or Wi-Fi adapter) to connect to the router.
•An 802.11a, b, g, n, or ac Wi-Fi adapter to create a wire ess network.
•An SFP transceiver to connect to a fiber optic ine.
•A USB modem (when it is necessary to connect to the Internet via mobi e
operators' networks).1
!
Your USB modem shou d be equipped with an active SIM card of your
operator.
Some operators require subscribers to activate their USB modems prior
to using them. P ease, refer to connection guide ines provided by your
operator when conc uding the agreement or p aced on its website.
For some mode s of USB modems, it is required to disab e the PIN
code check on the SIM card prior to connecting the USB modem to the
router.
1 Contact your operator to get information on the service coverage and fees.
4
DIR-825/GF Quick Installation Guide
CONNECTING TO PC
PC with Ethernet Adapter
1. Connect an Ethernet cab e between any of LAN ports ocated on the back
pane of the router and the Ethernet port of your PC.
2. To connect the device to a fiber optic line: connect your SFP transceiver
to the SFP port, then connect the fiber optic cab e to the SFP transceiver.
3. To connect via USB modem: connect your USB modem to the USB port2
ocated on the back pane of the router.
!In some cases you wi need to reboot the router after connection of the
USB modem.
4. To connect the device to an Ethernet line: p ease connect the router to
the ISP's Ethernet ine on y after setting the WAN port and creating the
Internet connection (see the Initial Configuration izard section, page
21).
5. Connect the power cord to the power connector port on the back pane of
the router, then p ug the power adapter into an e ectrica out et or power
strip.
6. Turn on the router by pressing the ON/OFF button on its back pane .
Then make sure that your PC is configured to obtain an IP address
automatica y (as DHCP c ient).
2 It is recommended to use a USB extension cab e to connect a USB modem to the
router.
5
DIR-825/GF Quick Installation Guide
Obtaining P Address Automatically
(OS Windows 7)
1. C ick the Sta t button and proceed to the Cont ol Panel window.
2. Se ect the Netwo k and Sha ing Cente section. (If the Contro Pane
has the category view (the Catego y va ue is se ected from the View by
drop-down ist in the top right corner of the window), choose the View
netwo k status and tasks ine under the Netwo k and Inte net
section.)
3. In the menu ocated on the eft part of the window, se ect the Change
adapte settings ine.
4. In the opened window, right-c ick the re evant Local A ea Connection
icon and se ect the P ope ties ine in the menu disp ayed.
5. In the Local A ea Connection P ope ties window, on the
Netwo king tab, se ect the Inte net P otocol Ve sion 4 (TCP/IPv4)
ine. C ick the P ope ties button.
6
DIR-825/GF Quick Installation Guide
6. Make sure that the Obtain an IP add ess automatically and Obtain
DNS se ve add ess automatically choices of the radio buttons are
se ected. C ick the OK button.
7. C ick the OK button in the connection properties window.
7
DIR-825/GF Quick Installation Guide
Obtaining P Address Automatically
(OS Windows 10)
1. C ick the Sta t button and proceed to the Settings window.
2. Se ect the Netwo k & Inte net section.
3. In the Change you netwo k settings section, se ect the Change
adapte options ine.
4. In the opened window, right-c ick the re evant Local A ea Connection
icon and se ect the P ope ties ine in the menu disp ayed.
5. In the Local A ea Connection P ope ties window, on the
Netwo king tab, se ect the Inte net P otocol Ve sion 4 (TCP/IPv4)
ine. C ick the P ope ties button.
8
DIR-825/GF Quick Installation Guide
6. Make sure that the Obtain an IP add ess automatically and Obtain
DNS se ve add ess automatically choices of the radio buttons are
se ected. C ick the OK button.
7. C ick the Close button in the connection properties window.
9
DIR-825/GF Quick Installation Guide
PC with Wi-Fi Adapter
1. To connect the device to a fiber optic line: connect your SFP transceiver
to the SFP port, then connect the fiber optic cab e to the SFP transceiver.
2. To connect via USB modem: connect your USB modem to the USB port3
ocated on the back pane of the router.
!In some cases you wi need to reboot the router after connection of the
USB modem.
3. To connect the device to an Ethernet line: p ease connect the router to
the ISP's Ethernet ine on y after setting the WAN port and creating the
Internet connection (see the Initial Configuration izard section, page
21).
4. Connect the power cord to the power connector port on the back pane of
the router, then p ug the power adapter into an e ectrica out et or power
strip.
5. Turn on the router by pressing the ON/OFF button on its back pane .
6. Make sure that the Wi-Fi adapter of your PC is on. As a ru e, modern
notebooks with bui t-in wire ess NICs are equipped with a button or
switch that turns on/off the wire ess adapter (refer to your PC
documents). If your PC is equipped with a p uggab e wire ess NIC, insta
the software provided with your Wi-Fi adapter.
Then make sure that your Wi-Fi adapter is configured to obtain an IP address
automatica y (as DHCP c ient).
3 It is recommended to use a USB extension cab e to connect a USB modem to the
router.
10
Tabla de contenidos
Otros manuales de Enrutador de red de D-Link
D-Link
D-Link DI-604UP Manual de usuario
D-Link
D-Link SharePort DIR-825 Manual de usuario
D-Link
D-Link DSR-150 Manual de usuario
D-Link
D-Link DSL-2640B Manual de usuario
D-Link
D-Link Xtreme N DIR-614 Manual de usuario
D-Link
D-Link DES-3010G Manual de usuario
D-Link
D-Link DGL-4100 - GamerLounge Broadband Gigabit Gaming... Manual de usuario
D-Link
D-Link GO-DSL-N151 Manual de usuario
D-Link
D-Link DIR-806A Manual de usuario
D-Link
D-Link DIR-600 Manual de usuario
D-Link
D-Link Amplifi DIR-657 Manual de usuario
D-Link
D-Link DWR-920 Instrucciones de funcionamiento
D-Link
D-Link DIR-514 Manual de usuario
D-Link
D-Link DIR-615/T Manual de usuario
D-Link
D-Link DIR-615 - Wireless N Router Manual de usuario
D-Link
D-Link RANGEBOOSTER N 650 Manual de usuario
D-Link
D-Link DWM-312 Manual de usuario
D-Link
D-Link GLB-802C Manual de usuario
D-Link
D-Link N300 Manual de usuario
D-Link
D-Link DSL-G604T Manual de usuario
Manuales populares de Enrutador de red de otras marcas
NETGEAR
NETGEAR FS526T - Switch Manual de usuario
Korenix
Korenix JetNet 5710G Series Manual de usuario
Automated Logic
Automated Logic ZN551 Manual del propietario
Cisco
Cisco ASR 1000 Series Manual del operador
EnGenius
EnGenius ESR-9710 Manual de usuario
Cisco
Cisco 805 Series Instrucciones de funcionamiento y seguridad