D-Link Ethernet Switches Manual de usuario

Quick Installation Guide

for All Ethernet Switches

First Edition (September 2001)

6SWITCHML.01

Printed In Taiwan

RECYCLABLE

Introduction

This Quick Installation Guide gives step-by-step

instructions for setting up all D-Link switches.

Please note that the model you have purchased

may appear slightly different from those shown in

the illustrations.

For more detailed information about your switch,

its components, making network connections, and

technical specifications, please refer to the User’s

Guide included with your switch.

Step 1  Unpacking

Open the shipping carton and carefully unpack its

contents. Please consult the packing list located in

the User Guide to make sure all the correct items

are present and undamaged. If any item is found

missing or damaged, please contact your local

D-Link reseller for replacement.

Items Included in Switch Packages

Type of Switch *

Unmanaged Smart or Managed

Item

Palm

Desktop/Rack Mount

Chassis

Device Yes

Yes Yes Yes

RS-232 Cable

(Printer cable) No No Yes Yes

Rack Mounting

Brackets No Yes Yes Yes

Rubber Feet Yes

Yes Yes Yes

Power Cord

(Adapter) Yes

Yes Yes Yes

User¡ƒs Gui d Yes

Yes Yes Yes

Multi-lingual

QIG Yes

Yes Yes Yes

*Stackable switches, unlike standalone switches, should also

include a cascade cable.

Step 2  Switch Installation

For safe switch installation and operation, it is

recommended that you:

♦ Visually inspect the power cord and see that

it is secured fully to the AC power connector.

♦ Make sure that there is proper heat

dissipation from and adequate ventilation

around the switch.

♦ Do not place heavy objects on the switch.

Desktop or Shelf Installation

When installing the switch on a desktop or shelf, the

rubber feet included with the device must be

attached on the bottom at each corner of the device’s

base. Allow enough ventilation space between the

device and the objects around it.

Figure 1. Attaching the rubber feet

Rack Installation

The switch can be mounted in an EIA standard size,

19-inch rack, which can be placed in a wiring closet

with other equipment. To install, attach the

mounting brackets on the switch’s front panel (one

on each side) and secure them with the screws

provided (please note that these brackets are not

designed for palm size switches).

Figure 2. Attaching the mounting brackets

Then, use the screws provided with the equipment

rack to mount the switch in the rack.

Figure 3. Installing the switch in a standard-sized

equipment rack

Step 3  Understanding Device

Network Connections

At this point, please connect the AC power cord into

an electrical outlet (preferably one that is grounded

and surge protected) and into the rear of the switch.

Once the switch is powered on, you will be able to

immediately see whether the network connections

are valid or not. A valid connection will cause the

Link/Act LED on the front panel of the switch to

light up for the corresponding port being connected.

Power Failure

As a precaution, the switch should be unplugged in

case of power failure. When power is resumed, plug

the switch back in.

Step 4  Plugging in the AC Power

Cord

Computers, servers and routers can be connected to

the switch by using media-appropriate fiber optic

cabling. For more information about cable types,

please refer to the User’s Guide.

Figure 4. Plugging the switch into an outlet

Additional Information

If you are encountering problems setting up your

network, please refer to the User’s Guide that came

with the switch. It contains many more rules,

charts, explanations and examples to help you get

your network up and running.

Additional help is available online at

http://www.dlink.com, http://www.dlink.com.uk, or

through our offices listed at the back of the User’s

Guide.

Tabla de contenidos

Otros manuales de Enrutador de red de D-Link

D-Link

D-Link DSL-2741B Manual de usuario

D-Link

D-Link DIR-840 Manual de usuario

D-Link

D-Link DGS-1224T - Web Smart Switch Manual de usuario

D-Link

D-Link DSL-500 Manual de instalación

D-Link

D-Link DGS-1008MP Manual de usuario

D-Link

D-Link DSL-G256DG Manual de usuario

D-Link

D-Link DES-3528 - xStack Switch - Stackable Manual

D-Link

D-Link DFL-1500 Manual de usuario

D-Link

D-Link DSL-500 Manual de usuario

D-Link

D-Link DES-3010F Manual de usuario

D-Link

D-Link DSL-2500U Manual de usuario

D-Link

D-Link DWM-312 Manual de usuario

D-Link

D-Link DGL-4300 - GamerLounge Wireless 108G Gaming... Manual de usuario

D-Link

D-Link DSL-2890L Manual de usuario

D-Link

D-Link DWR-932M Manual de usuario

D-Link

D-Link DIR-300NRU Manual de usuario

D-Link

D-Link DIR-X5460 Manual de usuario

D-Link

D-Link DIR-605L Manual de usuario

D-Link

D-Link DIR-819 Manual de usuario

D-Link

D-Link DIR-510L Manual de usuario

D-Link

D-Link DIR-655 - Xtreme N Gigabit Router Wireless Manual de usuario

D-Link

D-Link DSL-504 Manual de usuario

D-Link

D-Link DSL-2750U Manual de usuario

D-Link

D-Link DGS-1016D - Switch Manual de usuario

Manuales populares de Enrutador de red de otras marcas

Allnet

Allnet ALL0333AU Manual de usuario

HomeSeer

HomeSeer HT-SEL Manual de usuario

Sercomm

Sercomm Genesis OC3505D Manual de usuario

Billion

Billion BIPAC 5102 Series Manual de usuario

TP-Link

TP-Link TD-8817 Manual de usuario

Motorola

Motorola MR1900 Manual de usuario

Digi

Digi IX14 Manual de usuario

Cisco

Cisco NCS 540 Manual

XAVi

XAVi X8821e Manual de usuario

BEC

BEC 6200WZL Manual de usuario

MikroTik

MikroTik hAP ac3 Series Manual de usuario

Korenix

Korenix JetNet 5428G Series Manual de usuario

NETGEAR

NETGEAR FS526T - Switch Manual de usuario

Korenix

Korenix JetNet 5710G Series Manual de usuario

Automated Logic

Automated Logic ZN551 Manual del propietario

Cisco

Cisco ASR 1000 Series Manual del operador

EnGenius

EnGenius ESR-9710 Manual de usuario

Cisco

Cisco 805 Series Instrucciones de funcionamiento y seguridad